Altinex MT109-100 - Manuals

Altinex MT109-100 – Manual in PDF format online.

Manuals:

Manual

Manual Altinex MT109-100

Summary

Page 2 - MULTITASKERTM; TABLE OF CONTENTS

MULTITASKER™ 400-0095-005 1 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL .......................................................... 2 CLEANING......................................................... 2 FCC NOTICE ......................................................

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTITASKER™ 400-0095-005 2 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT109-100 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT109-100 and to prevent fire and shock hazards. Please read them c...

Page 4 - TECHNICAL SPECIFICATIONS; MECHANICAL

MULTITASKER™ 400-0095-005 3 3 ABOUT YOUR MT109-100 2 MT109-100 8-In 1-Out Stereo Audio Switcher Card The MT109-100 is a Stereo Audio Switcher Card which allows the connection of 8 stereo audio sources to a single receiving device, such as a cassette recorder, mixer, and/or amplifier for sound reinfo...

Page 5 - TOP RETAINER SCREW

MULTITASKER™ 400-0095-005 4 4 DESCRIPTION OF MT109-100 4 TOP RETAINER SCREW 8 AUDIO INPUTS AUDIO OUTPUT BOTTOM RETAINER SCREW

Page 6 - APPLICATION DIAGRAM; DIAGRAM 1: TYPICAL CONFIGURATION

MULTITASKER™ 400-0095-005 5 5 APPLICATION DIAGRAM 5 DIAGRAM 1: TYPICAL CONFIGURATION MT109-100

Page 7 - DIAGRAM 2: INTERNAL VIEW

MULTITASKER™ 400-0095-005 6 6 DIAGRAM 2: INTERNAL VIEW INPUT 6 INPUT 5 INPUT 4 INPUT 3 INPUT 2 INPUT 1 INPUT 8 INPUT 7 EXP 2 EXP 1 EXP 4 EXP 3 OUT AUDIO + - POWER

Page 8 - DIAGRAM 3: JUMPER SETTINGS; The; Default jumper settings shown.

MULTITASKER™ 400-0095-005 7 7 DIAGRAM 3: JUMPER SETTINGS The MT109-100 has 8 external inputs, 1 internal input, and 1 output. The internal inputs come from an Expansion card using a 10-pin IDC cable connected between P12s of the Expansion and Master cards. The internal input is configured as input 7...

Page 10 - OPERATION; Use uppercase letters for all commands.

MULTITASKER™ 400-0095-005 9 9 INSTALLING YOUR MT109-100 6 Step 1 . Determine how the MT109-100 is going to be configured. A standard MT109-100 is an 8-In, 1-Out switcher, but two MT109-100 s (one Master and one Expansion) may be configured as a15-In, 1-Out switcher. In Application Diagram, DIAGRAM 4...

Page 11 - DESCRIPTION OF COMMANDS

MULTITASKER™ 400-0095-005 10 10 7.2 DESCRIPTION OF COMMANDS Each command consists of three parts: Function, Card ID, and Unit ID. [ Function , Card ID , Unit ID ] Example: [VERC3U2] VER = Function C3 = Card ID or Group ID U2 = Unit ID (optional for Unit ID 0) For Function, see a detailed explanation...

Page 12 - Ui

MULTITASKER™ 400-0095-005 11 11 Command Format: [CnUiS] Cn = card numberS = save configuration Example: Save the card's current settings by sending the command [C4S]. The feedback will display the status and a save message. ON1C04OUTVOL=32/32INVOL1=16/32INVOL2=16/32INVOL3=16/32INVOL4=16/32INVOL5=16/...

Page 14 - INPUT

MULTITASKER™ 400-0095-005 13 13 INPUT Command Format: [SELmCnUi] m = Input (m # from 0 to 8) Cn = Card Slot NumberUi = Unit ID (i = # from 0 to 9) INCREMENT/DECREMENT Format: [+] / [-] [+] = Increment level by one[-] = Decrement level by one Example: An MT109-100 is in slot 4. Adjust the gain on Inp...

Page 17 - There is an

MULTITASKER™ 400-0095-005 16 16 31. […F] – Feedback After processing a command, an OK or ER will be returned as feedback if "F" is included at the end of the command string. 32. […P] – Path This command sets the path for the output, but is not active until the switch command, [SW], is execut...

Page 18 - Ci

MULTITASKER™ 400-0095-005 17 17 36. [RSI] This command resets the card IDs in the system. After sending this command, each card ID in the system will match the slot number of the card. If the card is moved to another slot, its ID number will be the new slot number. Command Format: [RSI] Example: Sen...

Page 20 - system will return the following feedback:

MULTITASKER™ 400-0095-005 19 19 Example: Group 5 consists of cards 2, 4 and 6. Group 2consists of cards 1, 2, 3, 4 and 5. Delete all the groups by sending the command [RMG * ]. The system will return the following feedback: G1-G8:EMPTY 45. [RD] This command reads and then displays the members in eac...

Page 21 - Group Commands

MULTITASKER™ 400-0095-005 20 20 Group Commands 42) [WR] Group cards 43) [RMC] Remove member(s) from group 44) [RMG] Delete group 45) [RD] Display group members 7.4 MENU MODE Menu Mode commands allow virtually the same functionality as programming commands. Unlike the programming commands, menu comma...

Page 22 - Set Input 3 Input Volume

MULTITASKER™ 400-0095-005 21 21 7.4.4 MT109-100 MENUS Following are the menus available to the MT109-100 . The first menu is the Main Menu only. The second listing is an expansion of all the menu items available. The expanded menu contains values in parentheses that indicate the current setting or v...

Page 23 - TROUBLESHOOTING GUIDE; Solution

MULTITASKER™ 400-0095-005 22 22 4. Set Ramp Time Starting from the Main Menu, set the ramp time to 10 seconds using the keystrokes below. 2 Select SETUP Menu 3 Select Set Ramp Time 4 Select Ramp Time = 10 seconds ESC Return to SETUP menu ESC Return to the MAIN Menu 5. Display Card Status Starting fr...

Page 24 - Solution 2; ALTINEX POLICIES

MULTITASKER™ 400-0095-005 23 23 Cause 2: The proper card input may not be selected. Solution: Select the card input that is used by RS-232 accessible commands in section 7. If no sound is present, see Cause 3. Cause 3: Cable connections to the destination are incorrect. Solution: Make sure that cabl...