Altinex MT108-103 - Manuals

Page 2 - MULTITASKER; TABLE OF CONTENTS

MULTITASKER 400-0162-003 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ................ 2 GENERAL .......................................................... 2 HANDLING ........................................................ 2 CLEANING...........................................................

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTITASKER 400-0162-003 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT108-103 and keep it handy for future reference. These safety instructions are to ensure the long life of your MT108-103 and to prevent fire and shock hazards. Please read them carefully a...

Page 4 - TECHNICAL SPECIFICATIONS; MECHANICAL

MULTITASKER 400-0162-003 3 ABOUT YOUR MT108-103 2 MT108-103 1-In, 4-Out Balanced Stereo Audio DA The MT108-103 is a Stereo, Audio Distribution Amplifier Card that allows the connection of a single stereo, audio source to four receiving devices. All inputs and outputs are balanced, allowing longer ca...

Page 5 - PRODUCT DESCRIPTION

MULTITASKER 400-0162-003 4 PRODUCT DESCRIPTION 4 BOTTOM RETAINER SCREW 4 AUDIO OUTPUTS AUDIO INPUT PRESENT LED POWER/SIGNAL TOP RETAINER SCREW

Page 6 - APPLICATION DIAGRAMS; DIAGRAM 1: TYPICAL SETUP

MULTITASKER 400-0162-003 5 APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MT108-102 MT113-101

Page 7 - DIAGRAM 2: INTERNAL VIEW

MULTITASKER 400-0162-003 6 DIAGRAM 2: INTERNAL VIEW INPUTBALANCEDLEFT & RIGHT 5-pin TERM. BLK. + - ON/OFFCONTROL SIGNAL DETECT POWER + + - - OUT 3 OUT 4 + + - - OUT 1 OUT 2 OUTPUTS BALANCEDLEFT & RIGHT 5-pin TERM. BLK.

Page 8 - OPERATION; Use uppercase letters for all commands.

MULTITASKER 400-0162-003 7 INSTALLING YOUR MT108-103 6 Step 1. Turn off power to the MultiTasker system and disconnect from AC power. Step 2. Remove a slot cover (MT200-101) from one of the unused slots. Identify the slot number and note that it is for RS-232control. Step 3. Slide the MT108-103 into...

Page 9 - DESCRIPTION OF COMMANDS

MULTITASKER 400-0162-003 8 7.2 DESCRIPTION OF COMMANDS Each command consists of three parts: Function, Card ID, and Unit ID. [ Function , Card ID , Unit ID ] Example: [VERC3U2] VER = Function C3 = Card ID or Group ID U2 = Unit ID (optional for Unit ID 0) For Function, see a detailed explanation unde...

Page 13 - GROUP OPERATION

MULTITASKER 400-0162-003 12 GROUP OPERATION This command disables output "m" for each card in group "k". Command Format: [OFFmGk] m = Output no. (m = # from 1-4) Gk = Group ID (k = # from 1-8) Example: 1. [OFF1G1]: Turns off Output 1 for each card in G1. 2. [OFFG1]: Turns off all out...

Page 14 - Ci

MULTITASKER 400-0162-003 13 Command Format: [RSI] Example: Send the command [RSI] to the system with Unit ID 0. The card in slot 1 will have ID 1, the card in slot 2 will have ID 2, and so on. If the card in slot 1 is then moved to slot 4, the card ID will then be 4. 19. [SIDn] This command sets all...

Page 16 - TROUBLESHOOTING GUIDE; offer suggestions for the following:

MULTITASKER 400-0162-003 15 7.3. SUMMARY OF COMMANDS Basic Commands 1) [VER] Display firmware version 2) [C] Display card status 3) [CnS] Save card settings 4) [CLR] Reset card to defaults 5) [TEST] Test internal memory ICs 6) [HELP] Display available commands Feedback Commands 7) [FBD] Feedback del...

Page 17 - The card output is turned OFF.; ALTINEX POLICIES; CONTACT INFORMATION

MULTITASKER 400-0162-003 16 Cause 2: The card output is turned OFF. Solution 1: Turn on the card output that is used. See RS-232 accessible commands in section 7. If no sound is present, see Solution 2. Solution 2: If there is still no sound, see Cause 3. Cause 3: Cable connections to the destinatio...