Altinex MT106-103 - Manuals

Page 2 - MULTITASKER; TABLE OF CONTENTS

MULTITASKER 400-0394-007 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ................ 2 GENERAL .......................................................... 2 INSTALLATION.................................................. 2 CLEANING......................................................... 2...

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTITASKER 400-0394-007 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT106-103 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT106-103 and to prevent fire and shock hazards. Please read them care...

Page 4 - Video Scaler Card; TECHNICAL SPECIFICATIONS; DESCRIPTION; GENERAL; MECHANICAL

MULTITASKER 400-0394-007 3 ABOUT YOUR MT106-103 2 MT106-103 Video Scaler Card The MT106-103 Scaler converts composite video (C-Video), S-Video, and component video into ahigh-resolution RGBHV/component video output. A VGA through SXGA computer signal input can be switched to the output via a pass-th...

Page 5 - PRODUCT DESCRIPTION

MULTITASKER 400-0394-007 4 PRODUCT DESCRIPTION 4 (480i) TOP RETAINER SCREW BOTTOM RETAINER SCREW COMPONENT VIDEO INPUT COMPOSITE VIDEO INPUT S-VIDEO INPUT VIDEO OUTPUT PC BYPASS INPUT RGBHV/COMPONENT

Page 6 - APPLICATION DIAGRAMS; DIAGRAM 1: TYPICAL SETUP; COMPONENT VIDEO

MULTITASKER 400-0394-007 5 APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MT106-103 COMPONENT VIDEO C-VIDEO S-VIDEO PC BYPASS COMPUTER/COMPONENT VIDEO

Page 7 - DIAGRAM 2: INTERNAL VIEW; MP; INPUT

MULTITASKER 400-0394-007 6 DIAGRAM 2: INTERNAL VIEW 15-PIN HD PC BYPASS 15-PIN HD VIDEO MINI-DIN 4-PIN S-VIDEO MP SCALER INPUT BNC C-VIDEO 15-PIN HD COMPONENT COMPUTER/ OUTPUT (480i) COMPONENT VIDEO

Page 8 - OPERATION; Use uppercase letters for all commands.

MULTITASKER 400-0394-007 7 INSTALLING YOUR MT106-103 6 Step 1. Turn off power to the MultiTasker system and disconnect from AC power. Step 2. Remove a slot cover (MT200-101) from one of the unused slots. Identify the slot number and note that it is for RS-232 control. Step 3. Slide the MT106-103 int...

Page 11 - Ui

MULTITASKER 400-0394-007 10 7. [FBD] This command turns feedback delay on or off. It is necessary when installing some newer cards in older systems. If the system does not receive all of the feedback from the card, the card may be communicating too fast. This command will slow down the card's commun...

Page 14 - NOTE: The Hue adjustment does not apply to

MULTITASKER 400-0394-007 13 20. [COLOR] This command displays the color setting and makes the color function active for use with the [+] and [-] control commands. Command Format: [COLORCn] Cn = Card ID (n = # from 1 to max slots) Example: Send the command [COLORC4] to select the color function on C4...

Page 16 - ID COMMANDS

MULTITASKER 400-0394-007 15 ID COMMANDS The default card ID is the same as the card slot number. The next several commands allow the user to change the card ID to a value other than the slot number. Once the ID is changed, moving the card to another slot will not change the card ID. If a card in slo...

Page 18 - This command deletes one or all groups.

MULTITASKER 400-0394-007 17 38. [RMG] This command deletes one or all groups. Command Format: [RMGk] Gk = Group ID (k = # from 1-8, * for all) Example: Remove all cards from G52 by sending [RMG5]. The system will return the following feedback: [G5=0] Example 2: Remove all cards from all groups, effe...

Page 19 - Group Commands

MULTITASKER 400-0394-007 18 Group Commands 36) [WR] Add card(s) to a group 37) [RMC] Remove card(s) from group 38) [RMG] Delete group 39) [RD] Display group members 7.4 MENU MODE Menu Mode commands allow virtually the same functionality as programming commands. Unlike the programming commands, menu ...

Page 21 - along with a; Change Output Resolution

MULTITASKER 400-0394-007 20 6: HUE (0) 1: + 2: - 7: ASPECT RATIO (4:3) 1: 16:9 8: 3D COMB FILTER (ON) 1: OFF 9: NOISE REDUCTION (ON) 1: OFF A: FREEZE (OFF) 1: ON 3: VERSION This selection displays the model number and firmware revision, and then redisplays the Main Menu. 4: STATUS This selection dis...

Page 22 - TROUBLESHOOTING GUIDE; CONTACT INFORMATION

MULTITASKER 400-0394-007 21 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found no problems in the supplied MT106-103 . However, we would like to offer suggestions for the following: 8.1 NO DISPLAY Cause 1: The source has a problem. Solution: Check the source and make sure that there is ...