Altinex MT106-101 - Manuals

Page 2 - MULTI-TASKER; TABLE OF CONTENTS; Page

MULTI-TASKER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 1.1 GENERAL ................................................... 2 1.2 INSTALLATION .......................................... 2 1.3 CLEANING.................................................. 2 1.4 FCC / CE NOTICE .....

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTI-TASKER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT106-101 . Keep this manual handy for future reference. These safety instructions are to ensurethe long life of your MT106-101 and to prevent fire and shock hazard. Please read them carefully andheed ...

Page 4 - Scan Doubler Card; TECHNICAL SPECIFICATIONS; MECHANICAL

MULTI-TASKER 3 ABOUT YOUR MT106-101 2 MT106-101 Scan Doubler Card The MT106-101 is a Scan Doubler Card designed for use with the Multi-Tasker  system. When installed in a Multi-Tasker  enclosure, this card allows the connection of an S-Video or one of threeComposite Video (NTSC/PAL) sources to a d...

Page 6 - APPLICATION DIAGRAM; Application 1

MULTI-TASKER 5 APPLICATION DIAGRAM 5 Application 1 Application 2

Page 8 - OPERATION; Use uppercase letters for all commands.

MULTI-TASKER 7 INSTALLING YOUR MT106-101 6 Step 1. Slide the MT106-101 into an available slot in the Multi-Tasker™ Basic Enclosure inorder to connect to the bus. Make surethat the MT106-101 Scan Doubler card fits into place. Secure the card to theMulti-Tasker™ by tightening the retainerscrews locate...

Page 9 - refer to the

MULTI-TASKER 8 Ui = Unit ID (i = # from 0 to 9) ( refer to the MT100-100 user’s guide for explanation) Example: If one Scan Doubler Card is in slot #2 of unit 3.Send the command [VERC2U3] , and the Multi-Tasker™ Basic Enclosure will return thefollowing: MT106-101 690-0155-003 MT106-101 = card type69...

Page 10 - user’s guide for explanation)

MULTI-TASKER 9 STATUS Command MIN Value MAX Value Default Value [ HPOS ] 0 20 5 [ VPOS ] 0 20 19 [ HSIZE ] 0 20 19 [ VSIZE ] 0 20 19 [ BRIG ] 0 20 10 [ SHARP ] 0 3 2 [ COLOR ] 0 10 10 [ HUE ] 0 10 10 Attempting to cycle past the minimum ormaximum values will have no effect on theattribute's value. A...

Page 14 - ) To clear all groups of unit 1, send the

MULTI-TASKER 13 25. [CLR] This command clears the members for a singlegroup or for all nine groups. Command Format: [CLRGkUi] Gk = group number (k = # from 1-9) Ui = unit number (i = # from 0-9) Example: 1) To clear group #1, send the [CLRG1U1] command. This command clears themembers for the specifi...

Page 15 - TROUBLESHOOTING GUIDE; would like to offer suggestions for the following:

MULTI-TASKER 14 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found noproblems in the supplied MT106-101 ; however, we would like to offer suggestions for the following: • 8.1 LED IS NOT LIT • 8.2 LED IS BLINKING RED • 8.3 NO DISPLAY 8.1 LED IS NOT LIT Cause 1: Card cage is not plugged i...

Page 16 - ALTINEX POLICY; Please see the Altinex website at; CONTACT INFORMATION

MULTI-TASKER 15 ALTINEX POLICY 9 9.1 LIMITED WARRANTY/RETURN POLICY Please see the Altinex website at www.altinex.com for details on warranty and return policy. 9.2 CONTACT INFORMATION ALTINEX, INC 592 Apollo street Brea, CA 92821 USA TEL: 714 990-2300 TOLL FREE: 1-800-ALTINEX WEB: www.altinex.com E...