Altinex MT104-107 - Manuals

Page 2 - MULTI-TASKER; TABLE OF CONTENTS; Page

MULTI-TASKER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .................. 2 1.1 GENERAL ................................ ..................... 2 1.2 INSTALLATION ................................ ............. 2 1.3 CLEANING ................................ .................... 2 1.4 FCC...

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTI-TASKER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before usingyour MT104-107 . Keep this manual handy for future reference. These safety instructions are toensure the long life of your MT104-107 and to prevent fire and shock hazard. Please read themcarefully and heed a...

Page 4 - ABOUT YOUR MULTI-TASKERTM; MECHANICAL

MULTI-TASKER 3 ABOUT YOUR MULTI-TASKER™ 2 MT104-107 3-IN 1-OUT, Dual Video/S-VideoSwitcher Card The MT104-107 is a dual 3 -IN 1-OUT Video/S-Video Switcher Card. There are 3 inputs(+1internal) for Video and 3 inputs (+1internal) forS-Video. It is designed for use in Multi -Tasker  enclosures. The MT...

Page 5 - PRODUCT DESCRIPTION

Page 6 - APPLICATION DIAGRAM; Application 1

Page 7 - Application 2: Internal View; Inputs

MULTI-TASKER 6 Application 2: Internal View 3-IN 1-OUT VIDEO, S-VIDEO SWITCHER (BNC, 4-PIN DIN IN/OUT) POWER MT104-107 Inputs 1 BNC 4-PIN MINI DIN 2 3 1 2 3 S-Video INPUT OFF INPUT OFF OUTPUT4-PIN MINI DIN OUTPUTBNC Inputs C-Video INPUT SELECT CONTROL

Page 8 - INSTALLING YOUR MULTI-TASKERTM; Use uppercase letters for all commands.

MULTI-TASKER 7 INSTALLING YOUR MULTI-TASKER™ 6 Step 1. Slide the MT104-107 into an available slot in the Multi-Tasker™ Enclosure inorder to connect to the bus. Make surethat the MT104-107 card fits into place. Secure the card to the Multi-Tasker™ bytightening the retainer screws located onthe top an...

Page 9 - SINGLE CARD; Since only one of each input type may be; GROUP OF CARDS

MULTI-TASKER 8 the command [VERC2U3] . T he Multi-Tasker™ will return the following feedback: MT104-107 690-0160-002 MT104-107 = card type 690-0160-002 = software version 2. [C] This command receives the status of the card. Command Format: [CnUi] Cn = card ID (n = 1 to max slots)Ui = unit id (i = fr...

Page 10 - PF

MULTI-TASKER 9 S = saves command to memory Example: [ON1VG1U1] : Turns ON C-Video input 1 for each card in group 1 of unit 1. [ON…..P]: sets path This command will set the path for the output,but it is not active until the switch command,[SW], is executed. Commands ending in "P"are not execu...

Page 11 - There are two; command or the [OFFmCnUi; FP; card in slot 2 of

MULTI-TASKER 10 [OFF…..P]: sets path This command will set the path for the output,but it is not active until the switch command,[SW], is executed. Commands ending in "P" arenot executed immediately. The path for outputson multiple cards or the same card can beloaded. Command Formats: [OFFmV...

Page 12 - Ui

MULTI-TASKER 11 Ui = unit number (i = # from 0-9) Example: To group cards #1, 2, and 3 as group 5 of unit#1, send the command [WRC1C2C3G5U1] .After executing this command, cards 1, 2 and 3will be grouped together as group 5 of unit 1. 12. [CLR] This command clears the members for a singlegroup or fo...

Page 13 - TROUBLESHOOTING GUIDE; would like to offer suggestions for the following:; ALTINEX POLICY; Please see the Altinex website at

MULTI-TASKER 12 8) […P] Sets the path, preload for [SW] 9) [SW] Switch preloaded output buffer 10) [HELP] Display available commands 11) [WR] Groups multiple cards 12) [CLR] Clears members of a single groupor all groups 13) [G] Requests group data 14) [RD] Displays group members 15) [CLM] Remove mem...