Altinex MT103-118 - Manuals

MULTI-TASKER 4 PRODUCT DESCRIPTION 4 APPLICATION DIAGRAM 5 Application Diagram 1

MULTI-TASKER 6 INSTALLING YOUR MT103-118/120 6 Step 1. Slide the MT103-118/120 into an available slot in the Multi-Tasker™Enclosure in order to connect to the bus.Make sure that the MT103-118/120 card fits into place. Secure the card to theMulti-Tasker™ by tightening the retainerscrews located on th...

MULTI-TASKER 8 9. […F] – Feedback After processing a command, an OK or ER willbe returned as feedback if "F" is included at theend of a command string or if the unit ID iszero. 10. […P] – Path This command will set the path for the output,but it is not active until the switch command,[SW], i...

MULTI-TASKER 9 7.4 SUMMARY OF COMMANDS 1) [VER] Receives software version 2) [Ci] Receives status of the card 3) [CiS] Saves card configuration 4) [ONS] Turns on one or more S-Videooutput 5) [ONV] Turns on one or more Videooutput 6) [OFFS] Turns OFF one or more S -Video output 7) [OFFV] Turns OFF on...

MULTI-TASKER 10 Cause 2: The MT103-118/120 card and itsserial device are notcommunicating. Solution 1: Turn the system OFF and then ONagain. If there is still an error, seeCause 3. Cause 3: RS485 communication error Solution 1: Make sure that the card is pushedall the way into the slot. If there iss...