Alpine TMX-R705 - Manuals - manualsarea.com

Page 2 - Contents; Operating Instructions; WARNING; Other Useful Features; Installation and Connections; LIMITED WARRANTY; E N G L I S H

FR ES DE SE IT 1 -EN Contents Operating Instructions WARNING WARNING .................................................. 2 CAUTION ................................................... 3 PRECAUTIONS ......................................... 3 Basic Operations Parts Names of the Overhead Monitor ..........

Page 5 - Basic Operations; Parts Names of the Overhead Monitor

4 -EN Basic Operations Remote Sensor Dome Light Monitor Display Panel Headphone Outputs Two output jacks (mini-phono plug) are provided for wired headphones. Output level is adjusted using the Volume UP/DN buttons on the remote control. NOTE Plugging a headphone into either jack will mute the Variab...

Page 6 - Closing the Monitor Display; Opening the Monitor Display

FR ES DE SE IT 5 -EN Closing the Monitor Display NOTE The TMX-R705 is a precision device. With carefulhandling, its performance can be maintained at a highlevel for a long time. 1 Press the OPEN/CLOSE button of the main unitor press the POWER button, press and hold theOPEN/CLOSE button of the suppli...

Page 7 - Adjusting the Volume; Audio Mute Function

6 -EN Adjusting the Monitor ViewingAngle Adjust the monitor's angle for better visibility. 1 While viewing the screen that is shown press theANGLE 9 or 8 button to adjust the display to the ideal viewing angle.The display viewing angle can be adjustedbetween about 80 and 105 degrees. 2 Press the 9 o...

Page 8 - Switching Display Modes

FR ES DE SE IT 7 -EN Switching Display Modes 1 Press the DISPLAY button or press and hold theSETUP button for at least 2 seconds. Each presschanges the display modes as follows: MODE 1 MODE 2 MODE 3 MODE 4 (WIDE) (ZOOM) (CINEMA) (NORMAL) MODE 1 (WIDE) MODE 3 (CINEMA) MODE 2 (ZOOM) Stretches the norm...

Page 9 - Adjusting Brightness of Picture; Adjusting Color Density of Picture; Adjusting Tint of Picture

8 -EN Other Useful Features Adjusting Brightness of Picture 1 Press the SETUP button. 2 Press the 9 or 8 button within 10 seconds and select BRIGHT. 3 Press the 9 or 9 button within 10 seconds to adjust the brightness. 4 Press the SETUP button to finish adjustments. Adjusting Color Density of Pictur...

Page 11 - Dome Light Settings

10 -EN Other Useful Features Dome Light Settings 1 Press the DOME LIGHT button to turn the DomeLight ON or OFF regardless of whether thevehicle's doors are open or closed. Door Closed: The dome light will remain lit until the vehicle's door is opened andclosed. The dome light will returnto Auto mode...

Page 12 - Battery Replacement; Replacing the Dome Light Bulb

FR ES DE SE IT 11 -EN Battery Replacement Applicable battery: Use two “AAA” sized drybatteries or equivalent. • Point the remote control transmitter toward the remote sensor on the TMX-R705 and use theremote control within 2 meters from the TMX-R705. 1 Opening the battery cover.Slide out the battery...

Page 13 - In Case of Difficulty; No function or display.; Information; Specifications; MONITOR SECTION

12 -EN In Case of Difficulty If you encounter a problem, please review the items inthe following checklist. This guide will help you isolatethe problem if the unit is at fault. Otherwise, make surethe rest of your system is properly connected or consultyour authorized Alpine dealer. No function or d...

Page 14 - Warning; MAKE THE CORRECT CONNECTIONS.; Caution

FR ES DE SE IT 13 -EN Before installing or connecting the unit, pleaseread the following and pages 2 and 3 of thismanual thoroughly for proper use. Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fireor product damage. USE ONLY IN CARS WITH A 12 VOLT NEGATI...

Page 15 - IMPORTANT

14 -EN Installation and Connections IMPORTANT Please record the serial number of your unit inthe space provided below and keep it as apermanent record. The serial number plate islocated on the bottom of the unit. SERIAL NUMBER:INSTALLATION DATE:INSTALLATION TECHNICIAN:PLACE OF PURCHASE: Precautions ...

Page 16 - Mounting Instruction

FR ES DE SE IT 15 -EN Mounting Instruction This Motorized Overhead Monitor requires a 12VDC power supply for the Monitor Display to openand close.Please DO NOT OPEN and CLOSE BY HAND andhandle it with care. Please follow these steps carefully! 1 Remove the transportation screw from the unit. 2 Conne...

Page 17 - Connections

16 -EN Installation and Connections Connections 1 2 3 To other monitor 5m Mini-DIN Extension Cab le Mini-DIN to RCA Interf ace Mini-DIN to RCA Interf ace 5m Mini-DIN Extension Cab le A UX-IN 2 connector A UX-IN 1 connector A udio/Video output connector Accessory/Ignition (Red) GND (Black) Ext. A/V S...