Alpine TDM-7582R - Manuals

Alpine TDM-7582R – Manual in PDF format online.

Manuals:

Manual

Manual Alpine TDM-7582R

Summary

Page 3 - Contents; Operating Instructions; WARNING; Installation and Connections; ENGLISH

EN 1 -EN Contents Operating Instructions WARNING WARNING .................................................. 2 CAUTION ................................................... 2 PRECAUTIONS ......................................... 2 Basic Operation Detaching the Front Panel .................................

Page 4 - CAUTION

2 -EN WARNING WARNING The exclamation point within an equilateraltriangle and "WARNING" are intended to alert theuser to the presence of important operatinginstructions.Failure to heed the instructions will result insevere injury or death. DO NOT DISASSEMBLE OR ALTER. Doing so may result in ...

Page 6 - Detaching the Front Panel; Initial System Start-Up; Basic Operation

4 -EN Detaching the Front Panel 1 Press the POWER button to turn off the power. 2 Press the (Release) button until the front panel pops out. 3 Grasp the left side of the front panel and pull itout. NOTES • The front panel may become hot (especially theconnector terminals), this is not malfunction. •...

Page 7 - Turning Power On and Off; Adjusting Source Signal Levels; Turning Loudness On/Off

EN 5 -EN Turning Power On and Off 1 Press the POWER button to turn on the unit. NOTE The unit can be turned on by pressing any other buttonexcept the eject c button. The volume level gradually increases to theprevious level you were listening to before theunit was turned off.Press the POWER button a...

Page 8 - Manual Storing of Station Presets; Radio Operation; Manual Tuning; Automatic Seek Tuning

6 -EN 3 Press the TUNE button to illuminate the "DX" and "SEEK" indicators in the display.With the DX mode activated, both strong andweak stations will be tuned in the Auto-Seekoperation.Press again to return to the local mode. The "DX"indicator will turn off and the "SEE...

Page 9 - Tuning to Preset Stations

7 -EN 3 Repeat the procedure to store up to 5 otherstations onto the same band.To use this procedure for other bands, simplyselect the band desired and repeat theprocedure. A total of 24 stations can be stored in the presetmemory (6 stations for each band; FM1, FM2,MW and LW). NOTE If a preset memor...

Page 10 - RDS Operation; Recalling Preset RDS Stations

8 -EN RDS Operation Recalling Preset RDS Stations 1 Press the AF button to activate the RDS mode. The display shows "AF" when the RDS mode isactivated. 2 Make sure that the function indicator at the topside of the "F" button illuminates, then press the preset button in which your des...

Page 11 - Turning Emergency Alarm On or Off

9 -EN NOTE If no button is pressed within 5 seconds after pressing thePTY button, the PTY mode will be automatically cancelled. 3 Press the DN g and f UP buttons within 5 seconds after activating the PTY mode tochoose the desired programme type while thePTY (programme type) is being displayed. Eachp...

Page 12 - Priority News

10 -EN Priority News This function allows you to preset to give priorityto the News programme. You will never miss theNews programme as the unit automatically givespriority to the News programme whenever itbegins broadcasting, and interrupts theprogramme you are currently listening. Thisfeature is f...

Page 13 - Inserting/Ejecting Cassette; Normal Play and Pause; Cassette Player Operation; Repeat Play

11 -EN Inserting/Ejecting Cassette 1 Insert a cassette tape into the slot with the openside facing right. When the cassette is loaded, the playerautomatically starts tape playback and indicates"TAPE" in the display. 2 Press the Eject ( c ) button when you want to eject the cassette tape. NOT...

Page 14 - Manual Reverse

12 -EN Fast Forward and Rewind 1 Press the DN g or f UP button during tape play to fast rewind or forward the taperespectively.The tape side indicator ( or ) blinks and >> or << moves indicating the direction of the tape.When the end of the tape is reached in therewind mode, the player s...

Page 15 - CD Changer Operation; Fast Forward and Backward

13 -EN Controlling CD Changer (Optional) If an optional Alpine 6-disc CD Changer (M-Bus)is connected to the 8-pin DIN connector of theTDM-7586RB/TDM-7584R/TDM-7582R you cancontrol the CD Changer using the TDM-7586RB/TDM-7584R/TDM-7582R. NOTE The CD controls on the TDM-7586RB/TDM-7584R/TDM-7582R for ...

Page 16 - Scanning Programmes

14 -EN M.I.X. (Random) Play 1 Press "F" button. The function indicator at the top side of the "F"button will turn off. 2 Press the M.I.X. button while the CD is playing or in the Pause mode.The M.I.X. indicator will appear in the display.The tracks on the disc will be played back in ...

Page 18 - Remote Control Operation

16 -EN Remote Control Operation 8 g DN Button Radio mode: SEEK (DN) ButtonCD changer mode: Press the button to go backto the beginning of the current track.Tape mode: Press the button during tape play tofast rewind the tape respectively. 9 f UP Button Radio mode: SEEK (UP) ButtonCD changer mode: Pre...

Page 19 - Battery Replacement

17 -EN Battery Replacement Applicable battery: Use two “AAA” sized drybatteries or equivalent. 1 Opening the battery coverSlide out the battery cover while firmly pressingthe direction of arrow. 2 Replacing the batteryPut the batteries in the case observing thepolarities as illustrated. 3 Closing th...

Page 20 - Information; Cassette; In Case of Difficulty; Basic

18 -EN Information Cassette Tape playback sounds dull. • The tape head needs cleaning. - Clean the tape head. • Incorrect Dolby NR in use (TDM-7586RB/TDM- 7584R only).- Check Dolby NR switch setting. CD CD Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD.- Allow th...

Page 21 - Specifications

19 -EN Indication for CD Changer • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • Malfunction in the CD Changer. - Consult your Alpine dealer. Press the magazine eject button and pull out the magazine....

Page 22 - IMPORTANT

20 -EN Installation and Connections IMPORTANT Please record the serial number of your unit in thespace provided below and keep it as a permanentrecord. The serial number plate is located on thebottom of the unit. SERIAL NUMBER:INSTALLATION DATE:INSTALLATION TECHNICIAN:PLACE OF PURCHASE: Precautions ...

Page 23 - Installation

21 -EN Installation 1 Remove the Detachable Front Panel (refer topage 4). Slide mounting sleeve from main unit.(See Removal Procedure) Slide the mountingsleeve into the dashboard. 2 When your vehicle has the Bracket, mount thelong hex bolt onto the rear panel of the TDM-7586RB/TDM-7584R/TDM-7582R an...

Page 24 - Connections

22 -EN Installation and Connections Connections Antenna To power antenna Battery DIN Connector PIN Configuration Rear Right Rear Left Speakers Speakers Front Right Front Left Rear Right Rear Left ISO AntennaConverter Plug To amplifier or equalizer ISO AntennaPlug Amplifier(Sold Separately) CD Change...