Alpine DVA-5210 - Manuals

4 -EN Disc Accessories There are various accessories available on the market forprotecting the disc surface and improving sound quality.However, most of them will influence the thickness and/ordiameter of the disc. Using such accessories can causeoperational problems. We recommend not using these ac...

5 -EN Discs playable on this unit Playable Discs The discs listed below can be played on this unit. VIDEO CD D I G I T A L V I D E O * Two-layer DVD disc compatible Mark (logo) Recorded content Disc size Max. playing time One-sided discApprox. 4 hours One-sided discApprox. 80 Minutes Two-sided discA...

6 -EN Multisession CD-R/RW: Once a recording has been stopped, this is considered onesession. If the disc is not closed (finalized), additional data maybe added. Once this additional data has been recorded, thisbecomes a “multisession” CD. The DVA-5210 can only readmultisession DATA Formatted discs ...

7 -EN Getting Started When Using the Remote Control • Point the remote control at the remote sensor within about 2 meters. • It may not be possible to operate the remote control if the remote control sensor is exposed to directsunlight. • The remote control is a small, lightweight precision device. ...

8 -EN Turning Power On and Off Play Position Memory Function If you turn power off or switch the ignition key to OFF duringplayback or change the source, playback will continue fromthe point where playback stopped when the power isturned ON again. The play position memory is canceledwhen the disc is...

9 -EN Initial System Start-Up Be sure to press the RESET button when using the unit for the firsttime, after installing the CD changer, after changing the car battery, etc. 1 Turn off the unit power. 2 Open the door. Refer to “Loading and Unloading Discs” on this page. 3 Press RESET with a ball-poin...

10 -EN DVD/Video CD Playing DVD/Video CD Caution • Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported. • Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints onthe ...

11 -EN Finding the Beginning of Chapters or Tracks During playback, press g or f . The chapter/track switches each time the button is pressed,and playback of the selected chapter/track starts. f : Press this to start playback from the beginning of the following chapter or track. g : Press this to st...

12 -EN Chapter/Track/Title Repeat Playback Use this function to play the disc’s titles, chapters or tracksrepeatedly. During playback, press REPEAT . The repeat mode switches each time the button is pressed. DVD VIDEO CD • The track/disc repeat modes cannot be used on video CDs with playback control...

13 -EN Displaying the Disc Status (DVD only) Use the procedure described below to display the status (title number,chapter number, etc.) of the currently playing DVD on the monitorscreen. During playback, press DISPLAY . The playback status is displayed for 5 seconds. Displaying the Disc Status (Vid...

14 -EN Repeat Play Press REPEAT to play back repeatedly the track being played. The track will be played repeatedly. Press REPEAT again and select OFF to deactivate repeat play. CD Playback 1 Insert a disc with the label side facing up. To load discs, see “Loading and Unloading Discs” onpage 9.Playb...

15 -EN MP3/WMA Playback The DVA-5210 will play back MP3/WMA files stored on CD-ROMs,CD-Rs, and CD-RWs. The format used must be compliant with ISO9660 level 1 or level 2.For further information about playing or storing MP3/WMA files,refer to pages 16 and 17 before using the unit.A WMA format file tha...

16 -EN M.I.X. (Random Play) Press M.I.X. in the play or pause mode. The M.I.X. mode switches each time the button is pressed. Press M.I.X. again and select OFF to deactivate the M.I.X. play. Repeat Play During playback, press REPEAT . The repeat mode switches each time the button is pressed. Press R...

17 -EN Terminology Bit rate This is the “sound” compression rate specified for encoding. Thehigher the bit rate, the higher the sound quality, but also the largerthe files. Sampling rate This value shows how many times per second the data is sampled(recorded). For example, music CDs use a sampling r...

18 -EN DVD Setup DVD Setup Operation The following steps 1 to 4 are common operationsto each setting item of DVD settings. Refer to eachsection for details. 1 Press SETUP before inserting a disc, or when in stop mode. The setup menu appears on the monitor. 2 Press 8 or 9 to select your desired setti...

19 -EN P A R E N T A L L E V E L O F F P A S S W O R D C H A N G E ∗ ∗ ∗ ∗ ; R E T U R N PARENT A L L S E T U P 2 Use the number keys “0” to “9” to input the 4-digit password, then press ENT. PARENTAL ∗ ∗ ∗ ∗ Input numbers are displayed as “ ∗ .“ The default password is 1111 upon shipment from thefa...

20 -EN Setting the Digital Output Use the following procedure to set the digital audio signal output fromthe DVA-5210. Setting item: DIGITAL OUTSetting contents: AUTO / LPCM AUTO: The digital output is switched automatically accordingto the type of audio signal being played.Be sure to select “AUTO” ...

21 -EN 5 Press SETUP . The settings are stored and the setup mode isdeactivated. • Press RETURN , or press 8 or 9 to select “RETURN,” then press ENT. to return to the previous display. Setting the Ai-NET Use the connected Ai-NET compatible head unit or AV head unit todisplay the information from the...

22 -EN Switch SOURCE TITLE REPEAT M.I.X. f g - / J RotaryEncoder Operation Switches the audio source.Turns the DVD player’s power ON in the DVD mode.Turns OFF in a mode other than main DVD. Switches the display pattern of the head unit. DVD: Repeat switching Video CD/CD/MP3/WMA: Repeat switching DVD...

23 -EN Information About DVDs Music CDs and DVDs have grooves (tracks) in which thedigital data is recorded. The data is represented asmicroscopic pits recorded into the track – these pits are readby a laser beam to play the disc. On DVDs, the density of thetracks and pits is twice that of CDs, so D...

24 -EN Dolby Pro Logic Dolby Pro Logic is the technology used to decode programsencoded in Dolby Surround. Pro logic decoding will provideyou with four channels of sound (front left/right, center andmonaural rear surround) from a 2-channel (stereo) source. * The separately sold digital audio process...

25 -EN List of Language Codes (For details, see page 18.) Language Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Se...

26 -EN List of Country Codes (For details, see page 19.) 7573 7577 7578 7580 7582 7587 7589 7590 7665 7666 7667 7673 7675 7682 7683 7684 7685 7686 7689 7765 7767 7768 7771 7772 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7865 7867 7869 7870 7871 7873 7876 7879 788...

28 -EN No picture is produced. • Monitor’s mode is not switched to the mode you want to see. - Switch to the mode you want to see. • Monitor’s parking brake cord is not connected. - Connect the monitor’s parking brake cord and set the parking brake. (For details, refer to the monitor’s instructions....

29 -EN • No disc is inserted. - Insert a disc. • Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.- Remove the disc by following these steps:1) Open the door.2) Press c again for at least 3 seconds. • Remote control operation is not possible. ...

30 -EN Before installing or connecting the unit, please read thefollowing and pages 3 and 4 of this manual thoroughlyfor proper use. Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire orproduct damage. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Che...

31 -EN Installation Installation Location Before deciding on the mounting location, check that opening andclosing the display will not hamper the gear shift in any position. • Install at an angle of within 35 degrees from the horizontal. Caution for installation Be sure to remove the mounting sleeve...

32 -EN Connections • Connect properly. Never connect to parts other than the ones indicated in these operating instructions. • Also refer to the operating instructions of the other products in the system. Setting the System Switch Switch to operate from either an Ai-NET compatible head unit or Ai-NE...

33 -EN System Example Precautions when Making System Upgrades • After connections are completed, it will be necessary to change the system settings of the DVA-5210. Before installing the product, please see “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21. • When connecting...

35 -EN Connecting an Ai-NET compatible Head Unit and TV Monitor Ai-NET OutputConnector Ai-NET Cable Ai-NET Connector(Black) Ai-NET Cable Ai-NET Connector(Gray) CD Changer (Sold Separately) DVD Player DVA-5210 Only when connecting with rear monitor Audio Output Connector RCA Extension Cable AUX Audio...

36 -EN Operating the DVA-5210 Video Player 1 PWR button Turns the power ON and OFF. 2 SETUP button Displays the SETUP (initial setting) screen. 3 LIST button Switches between Folder Search and File Search mode. 4 RETURN button Returns to the selection screen just prior to thecurrent screen. 5 - / J ...

Product Information Card English Filling in this Product Information Card isvoluntary. If you fill in this card and sendit to Alpine, your data will be tabulatedinto reference data for future Alpineproduct development. In addition, in thefuture you may receive information aboutnew products or Survey...

Scheda informazioniprodotto Italiano La compilazione di questa formulario èvolontaria. Se compilate questo formulario,ritornandolo ad Alpine, i Vostri dati sarannoraccolti in un file di riferimento per lo sviluppodei nuovi prodotti Alpine. In aggiunta Voi potretericevere in futuro informazioni rigua...