Page 2 - ¡Los cambiadores Alpine de CD le ofrecen más!; I caricatori CD Alpine danno di più!
Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. An Alpine CD Changer adds more musical choices to your sound system. All models except CHM-S620 can be controlled from Alpinehead units and deliver excellent sound quality. The CHA-S624 is a high-performan...
Page 3 - Contents; Operating Instructions; WARNING; Installation and Connections; ENGLISH
1 -EN Contents Operating Instructions WARNING WARNING .................................................. 2CAUTION ................................................... 2PRECAUTIONS ......................................... 2 Basic Operation Detaching the Front Panel .................................. ...
Page 4 - CAUTION
2 -EN WARNING This symbol means important instructions.Failure to heed them can result in seriousinjury or death. DO NOT OPERATE ANY FUNCTION THAT TAKESYOUR ATTENTION AWAY FROM SAFELY DRIVINGYOUR VEHICLE. Any function that requires your prolonged attention shouldonly be performed after coming to a c...
Page 7 - Basic; Detaching the Front Panel; Attaching the Front Panel; Basic Operation; Initial System Start-Up
5 -EN Basic Detaching the Front Panel 1 Press and hold the POWER button at least 3seconds to turn off the power. 2 Press the (Release) button at left side until the front panel pops out. 3 Grasp the left side of the front panel and pull itout. NOTES • The front panel may become hot in normal usage(e...
Page 8 - Turning Power On and Off; Display Angle Adjustment
6 -EN Basic About Demonstration This unit is equipped a Demonstration function.Soon after resetting the unit or after turning theunit on the first time, the demonstration star tsautomatically.To cancel the demonstration, refer to“Demonstration” on page 10. Turning Power On and Off 1 Press the POWER ...
Page 9 - Adjusting Source Signal Level; Changing Backlighting Colour; Selecting BBE Mode
7 -EN Basic Adjusting Source Signal Level If the difference in volume level between the CDplayer and FM radio is too great, adjust the FMsignal level as follows. 1 Press and hold the SETUP button for at least 3seconds. 2 Press the f UP button repeatedly to select "FM-LV."Each press of the f ...
Page 10 - Dimmer Control; Subwoofer On and Off
8 -EN Basic Dimmer Control Set the DIMMER control to AUTO to decrease theillumination brightness of the unit with the headlights of the vehicle ON. This mode is useful if youfeel the unit's backlighting is too bright at night. 1 Press and hold the SETUP button for at least 3seconds. 2 Press the f UP...
Page 11 - Turning Mute Mode On/Off
9 -EN Basic Sound (Beep) Guide Function This function will give audible feedback withvarying tones depending upon the button pressed. 1 Press and hold the SETUP button for at least 3seconds. 2 Press the f UP button repeatedly to select "BEEP."Each press of the f UP button changes the modes a...
Page 12 - Demonstration
10 -EN Basic Setting the AUX Mode (V-Link) You can input TV/video sound by connecting anoptional Ai-NET/RCA Interface cable (KCA-121B)or Versatile Link Terminal (KCA-410C) to thiscomponent. 1 Press and hold the SETUP button for at least 3seconds. 2 Press the f UP button repeatedly to select "AUX...
Page 13 - Setting the Bass Control; Setting the Treble Control
11 -EN Basic 3 Press the TUNE button to turn on or off theDEMO mode.Each press toggles between "DEMO ON" and"DEMO OFF." If no buttons are pressed 30 seconds after theDEMO mode is turned ON. The DEMO modethen begins. NOTE The initial setting at the factory is "DEMO ON." 4 Pres...
Page 14 - Setting the Bass Forward; Defeat
12 -EN Basic Setting the Bass Forward The Bass Forward function shifts the lowfrequency's energy component to the front. Thismoves the high energy, dynamic bass sound tothe front sound stage. 1 Press the B-FWD button to activate the BassForward setting mode. 2 Press the DN g button or f UP button to...
Page 15 - Adjusting the built-in Crossover; Switching the Display Modes
13 -EN Basic → Pattern1 → Pattern2 → Pattern3 → Display OFF Adjusting the built-in Crossover You can change High Pass Filter, Low Pass Filter,Phase on this unit, so that you can create yourfavourite sound effects. 1 Press the X-OVER button repeatedly to selectthe desired parameter. 2 Press the DN g ...
Page 16 - Radio; Manual Tuning; Radio Operation; Switching the Tuner Mode
14 -EN Radio Manual Tuning 1 Press the SOURCE button until a radiofrequency appears in the display. 2 Press the BAND button repeatedly until thedesired radio band is displayed.Each press changes the band: → FM1 → FM2 → FM3 → MW → LW 3 Press the TUNE button repeatedly until "DXSEEK" and "...
Page 17 - Automatic Seek Tuning; Manual Storing of Station Presets
15 -EN Radio Automatic Seek Tuning 1 Press the SOURCE button until a radiofrequency appears in the display. 2 Press the BAND button repeatedly until thedesired radio band is displayed.Each press changes the band: → FM1 → FM2 → FM3 → MW → LW 3 Press the TUNE button to illuminate the DX andSEEK indica...
Page 18 - Tuning to Preset Stations
16 -EN Radio Automatic Memory of StationPresets 1 Press the SOURCE button to select the radiomode. 2 Press the BAND button repeatedly until thedesired radio band is displayed. 3 Press and hold the A. ME button for at least 2seconds.The frequency on the display continues tochange while the automatic ...
Page 19 - RDS; RDS Operation
17 -EN RDS Setting RDS Reception Mode andReceiving RDS Stations The RDS (Radio Data System) is a radioinformation system using the 57 kHz subcarrier ofregular FM broadcast. The RDS allows you toreceive a variety of information such as trafficinformation, station names, and to automaticallyre-tune to...
Page 20 - Recalling Preset RDS Stations
18 -EN RDS Recalling Preset RDS Stations 1 Press the "F" button. The indicator will illuminate. 2 Press the AF button to activate the RDS mode.The display shows "AF" when the RDS mode isactivated. 3 Press the 1 through 6 buttons in which yourdesired RDS station is preset. If the pres...
Page 21 - Receiving Traffic Information
19 -EN RDS Receiving Traffic Information 1 Press the T.INFO button to activate the TrafficInformation mode.To cancel the Traffic information mode, press theT.INFO button again. 2 Press the g DN or f UP button to select your desired traffic information station. When atraffic information station is tu...
Page 23 - Turning Emergency Alarm On or Off; Displaying Radio Text
21 -EN RDS 4 Press the P. PTY button to activate thePRIORITY PTY mode again. • To change the programme category, perform the step 3. • To disable the PRIORITY PTY function, press the P. PTY button. NOTE In the PRIORITY PTY function, unlike in the T.INFOfunction, the volume does not increase during o...
Page 24 - CD; Playback
22 -EN CD Opening and Closing the Movabledisplay 1 Press the c button. The movable display will open. To close the movable display, press the c button again.The movable display will close. NOTES • Do not apply shock to the movable display when it isopen as it may result in malfunction of the unit. •...
Page 25 - Fast Forward and Backward; Scanning Programmes
23 -EN CD Music Sensor (Skip) 1 Momentarily press the g DN button once during CD play to return to the beginning of thecurrent track. If you wish to access the beginningof a track further back, repeatedly press until youreach the desired track. Press the f UP button once to advance to the beginning ...
Page 26 - Displaying the Title/Text; Titling Discs
24 -EN CD Displaying the Title/Text It is possible to display the CD title if the title hasbeen previously inputted. For details, see TitlingDiscs (see this page). Text information, such asthe disc name and the track name, will bedisplayed if playing a CD text compatible disc. 1 Press the TITLE butt...
Page 27 - Erasing Disc Title; CD Text Scroll Setting
25 -EN CD 5 Repeat the steps 3 and 4 above to complete thetitling. Pressing the MODE (Audio Control) knobafter entering the eighth character, automaticallystores the title into memory. When entering a title of less than 8 characters(for example, 3 character title):After entering 3 characters to comp...
Page 28 - Cassette; Repeat Play; Normal Play and Pause
26 -EN Cassette Cassette Player Operation (TDA-7588RB/TDA-7587R only) 2 Press the : / J button to pause the tape playback. The display shows "PAUSE."Press again to resume the tape playback. 3 Press the c button to stop the tape play and eject the cassette.The tape-direction indicator disappe...
Page 29 - Fast Forward and Rewind; Manual Reverse
27 -EN Cassette Fast Forward and Rewind 1 Press the g DN or f UP button during tape play to fast rewind or forward the taperespectively.The tape side indicator ( or ) blinks and >> or << moves indicating the direction of the tape.When the end of the tape is reached in therewind mode, the...
Page 30 - Changer; CD Changer Operation
28 -EN Changer Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may beconnected to the CDA-7876RB/CDA-7873R/TDA-7588RB/TDA-7587R if it is Ai-NET compatible. Witha CD Changer connected to the Ai-NET input of theCDA-7876RB/CDA-7873R/TDA-7588RB/TDA-7587R, the CD Changer will b...
Page 32 - Disc Scan
30 -EN Changer Disc Scan 1 Press the "F" button.The function indicator at the top side of the "F"button will turn off. 2 Press the SCAN button to play the first 10seconds of each track on the disc.The display shows the disc number, "SCAN",and track number being played during ...
Page 33 - Multi-Changer Selection
31 -EN Changer 6 Press and hold the TITLE button for at least 3seconds to record the title. NOTES • When the memory capacity for the disc titles is usedup, the display shows "FULL DATA" to indicate thatno more title can be memorized. • When you want to erase a title, enter the " " sy...
Page 34 - Remote; Remote Control Operation; Controls on Remote Control
32 -EN Remote Remote Control Operation 8 g DN Button Radio mode: SEEK (DN) ButtonCD mode: Press the button to go back to thebeginning of the current track. 9 f UP Button Radio mode: SEEK (UP) ButtonCD mode: Press the button to advance to thebeginning of the next track. ! 9 Button Radio mode: Pressin...
Page 35 - Battery Replacement
33 -EN Remote Battery Replacement CDA-7876RB/TDA-7588RB/TDA-7587R only Applicable battery: Use two “AAA” sized drybatter ies or equivalent. 1 Opening the battery coverSlide out the battery cover while firmly pressingthe direction of arrow. 2 Replacing the batteryPut the batteries in the case observi...
Page 36 - Information; In Case of Difficulty
34 -EN Information CD CD Player/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD.- Allow the vehicle's interior (or trunk) temperature to cool. CD playback sound is wavering. • Moisture condensation in the CD Module. - Allow enough time for the condensation to evap...
Page 38 - Specifications
36 -EN REMOTE CONTROL(CDA-7876RB/TDA-7588RB/TDA-7587R only) Battery Type "AAA" sized dry battery Battery Quantity 2 Dimensions (W × H × D) 42 mm (1-21/32") × 121 mm (4-3/4") × 23 mm (15/16") Weight (without battery) 50 g (1.8 oz) GENERAL Power Requirement 14.4 V DC (11–16 V allow...
Page 39 - Warning; Caution
37 -EN Installation and Connections Before installing or connecting the unit, pleaseread the following and pages 2 and 4 of thismanual thoroughly for proper use. Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fireor product damage. USE ONLY IN CARS WITH A ...
Page 41 - Installation
39 -EN Installation Caution When you install this unit in your car, do not removethe Detachable Front Panel.If the Detachable Front Panel is removed duringinstallation, you might press too hard and warp themetal plate that holds it in place. 1 Slide mounting sleeve from main unit (see"Removal...
Page 42 - Connection
40 -EN Ai-NET NORM EQ/DIV / , + - : ( & % $ # " ! 9 6 5 4 3 1 2 7 ) 8 ~ ; ? ? > < ? = . Connection Installation and Connections ISO Antenna Plug Antenna To vehicle phone To amplifier or equalizer To power antenna Battery ISO Antenna Convertor Plug To the instrument clusterillumination ...