Page 3 - Contents
WLBARGS Manual PB 1 1. Product Introduction 1.1 Package Contents ................................................................................... 3 1.2 Features ..................................................................................................... 3 1.3 Hardware Introduction .........
Page 4 - Additional Functions
WLBARGS Manual 2 3 2 3 2 3 <WAN setting (internet)> ...................................................... 30 <WAN setting/ Dynamic DNS> ........................................... 33 <WAN setting/Other setting> ............................................. 34 <LAN setting/LAN I...
Page 5 - accessing broadband internet.; Product Introduction
2 3 2 3 WLBARGS Manual 2 3 corega ‘s WLBARGS is an advanced model of broadband Router as well as an IEEE802.11g wireless access point which can speeds up to 108Mbps. Its management interface is straightforward for ease in setting up, while it sup-ports various security features to effectively preven...
Page 6 - Hardware Introduction; Bottom
WLBARGS Manual 4 5 4 5 4 5 1.3 Hardware Introduction 23 1 4 5 Front 9 8 6 7 10 Back A P R o ute r 11 Bottom 1. Power LED (Green) Indicate power status 2.Status LED (Red) ON:Reboot/Hung up/FirmWare upgrade 3. WAN LED (Green) ON: Connected Blink:Transmitting or receiving data 4. Wireless LED (Green)...
Page 7 - WLBARGS should be connecting to PC and modem; Following the steps below to set up WLBARGS and the connection.; Installation Procedure; Quick Installation; compatible wireless card for wireless connection.; Hardware Installation
4 5 4 5 WLBARGS Manual 4 5 2.1 WLBARGS should be connecting to PC and modem Following the steps below to set up WLBARGS and the connection. (1) Insert the cable connector into the Network Adapter embeded in PC, and insert the other side into one of LAN ports (1~4) of the Router. (2) Insert the conne...
Page 8 - PC Setting
WLBARGS Manual 6 7 6 7 6 7 3.1 TCP/IP Configuration The following steps and screenshots maybe dissimilar in different operat-ing systems. This manual takes Windows XP/200, 95/98/ME, and Mac O/S as examples: 3.1.1 Windows XP O/S (1) Enter [Control Panel] -> click [Network Connection] -> right c...
Page 10 - and
WLBARGS Manual 8 9 8 9 (5) Click [DNS] tab, unselect [Register this connection’s address in DNS], and press [OK]. (6) Go back to [Internet Protocol TCP/IP] and press [OK].(7) Press [OK] to close [Local Area Connection Properties]. 3.1.2 Windows 2000 O/S (1) Go to [My Computer], and enter [Control Pa...
Page 14 - the PC is not shown this message, restart the PC manually.
WLBARGS Manual 12 13 12 13 (4) Click [Gateway] tab, remove all the gateways, and press [OK] to close the window. (5) Go to [Network] and press [OK] to close the page.(6) The [Restart the windows] screen will pop-up, press [OK] to restart the PC. If the PC is not shown this message, restart the PC ma...
Page 15 - Browser Configuration
12 13 WLBARGS Manual 12 13 3.2 Browser Configuration 3.2.1 Windows O/S The following examples are for Windows XP O/S, skip this chapter if you are using Windows 200/98/ME. (1) Open Internet Explorer (IE 6.0), select [ Tools] menu and click [Internet Options]. If a [Dial-up Connection] window is pop-...
Page 17 - Quick Network Configuration; Network Configuration
14 15 14 15 WLBARGS Manual 14 15 4.1 Quick Network Configuration Basic configuration is required before connection your computer to the inter-net via WLBARGS. The connection methods may be differed by your contract to the ISP. Please reconfirm your connection conditions with your ISP prior to config...
Page 21 - Fixed IP
18 19 WLBARGS Manual 18 19 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the connection status. When [Connection ok] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any website for testing the connection. * Note: if...
Page 25 - Establishing Wireless Internet Connection
22 23 WLBARGS Manual 22 23 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the connection status. When [Connection OK] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any website for testing the connection. *Note: If ...
Page 27 - (3) Connection status will appear in the bottom right of the screen.
24 25 WLBARGS Manual 24 25 (2) Go [Control Panel] - [Network connection] again -> click [ Wireless network connection] and hold right button to select [Available wireless network connection], choose one available network e.g. ) corega , and click [Connect]. (3) Connection status will appear in th...
Page 29 - Authentication menu.; Wireless Security Configuration
26 27 26 27 WLBARGS Manual 26 27 To prevent from unlawful access to your network, you are recommended to perform wireless security setting. Enter the function menu, ad click on [802.11g/b Security setting] item. And select WEP or WPA setting. 5.1 WEP Setting In order to prevent your information from...
Page 30 - WPA Setting; cally according to the corresponding wireless network adapter.
WLBARGS Manual 28 29 28 29 (5) Recommended to keep default values of [DTIM] and [Preamble Mode].(6) Save your settings by [Apply].(7) Parameters can be output by [Output Info.] 5.2 WPA Setting WPA is encrypted by a periodic update, making it more difficult to be hacked. Home users and company users a...
Page 31 - staff before setting.
28 29 WLBARGS Manual 28 29 (4) Recommended to keep default values of [DTIM]and [Rekey Interval].(5) Press [Apply] to save setting. (6) Parameters can be output by [Output Info]. <WPA-EAP> (1) Select [ WPA2-EAP] or [ WPA/WPA2-EAP](Recommended). in the column of [Authentication] a. [ WPA2-EAP]: ...
Page 32 - Wireless Function; Function Introduction
WLBARGS Manual 30 31 30 31 30 31 The chapter will briefly introduce all functions of this product, and spell them out. Log in the management program and the below interface will appear. 6.1 Features <Mode> Wireless Function Wireless Enable: enable the wireless function.Wireless Disable: disabl...
Page 33 - Type
30 31 30 31 WLBARGS Manual 30 31 A. For auto obtain IP (DHCP): Type Press [MAC clone] to obtain the Ethernet card's Mac address. Domain name Please refer to your ISP internet service information, add/edit [Domain name]. Computer name Please refer to your ISP internet service information, add/edit [C...
Page 35 - WAN ip address
32 33 WLBARGS Manual 32 33 WAN ip address Please refer to your ISP internet service information. Subnet maskDefault gatewayMTU Maximum Transmission Unit. Deafault setting :1500 Byte. DNS server When [Manual Connection] is enable, two DNS server addresses can be inserted: DNS1 and DNS2 <WAN settin...
Page 36 - Direct PPPoE
WLBARGS Manual 34 35 34 35 (1) select available dynamic DNS services.(2) enter username for dynamic DNS.(3) enter passwod for dynamic DNS.(4) enter domain name.(5) IP update interval.(6) Click [Apply]. <WAN setting/Other setting> Direct PPPoE PPPoE pass-through function enable/disable. VPN pas...
Page 39 - Configuring firewall and no response to Wan Ping requests.
36 37 WLBARGS Manual 36 37 <Wireless setting/Access control> Wireless to wireless communication Configure wireless communication between clients.[Enable]/[Disable]: enable or disable wireless communication between clients. Wireless to wire communication Configure wireless and wired communication...
Page 40 - This function can forbid certain users or website on the network:
WLBARGS Manual 38 39 38 39 (3) Select one of protocol.(4) Enter the range of limited port number.(5) Select one of the time schedule limitations. (6) After clicking on [ Time Setting] button, a time schedule table is shown, once complete the setting, please click on [save] button to store the inform...
Page 41 - used by the server software.
38 39 WLBARGS Manual 38 39 <Advanced setting/virtual server> Virtual server is an appointed port opened by the PC in connection with the product, allowing other users connecting up via WAN. Open servers or special online games can take advantage of this function. Setting processes are as follo...
Page 43 - Firmware update; saves to select the file.
40 41 WLBARGS Manual 40 41 Admin login name User name for login this management program.Default setting is [root] . Admin login password Default password is empty . Password comfirmation Please retype password . Connection Timeout Enter connection time-out time. Time setup The default value is [Auto ...
Page 44 - The activation processes are as follows:
WLBARGS Manual 42 43 42 43 *Remote control The setting allows accessing the management program via remote control. The activation processes are as follows: (1) Select [Enable].(2) Indicate 1 ~ 9600 for parameters of port range. e.g. ) 8080 (Recommended keeping default values). (3) Click on [Apply] a...
Page 45 - Connection status log is displayed in the table.
42 43 WLBARGS Manual 42 43 <Status> Connection status log is displayed in the table. <Status/Log Display/Dos Attack log> Dos attack log is displayed in a table . <Status/Log Display/DHCP log> DHCP server log is displayed in a table .
Page 46 - System log is displayed in the table.
WLBARGS Manual 44 45 44 45 <Status/Log Display/system log> System log is displayed in the table. <Status/Log Display/E-mail function> An E-mail address can be set below. Special incidents will be recorded and sent to the appointed E-mail address. After entering all information, click [Sa...
Page 47 - All dynamic routing logs are displayed in the table.
44 45 WLBARGS Manual 44 45 <Advanced Setting/Backup DNS> Two DNS server addresses can be set in the table. If the primary DNS server does not function, the system will use them as secondary addresses. <Advanced Setting/Routing/Static Routing> Add/ Edit/ Delete static router can be set in...
Page 49 - Please make sure if the below processes are complete or not.; plugs been connected correctly?; FAQ
46 47 46 47 PB 46 WLBARGS Manual 46 47 46 47 When the installation fails or the connection doesn’t succeed, it’s recom-mended to take the following actions against the problems. (1) Find your problem in the troubleshooting collection.(2) Go to our official website at http://www.corega-asia.com, then ...
Page 50 - until that user exits the program.
WLBARGS Manual 48 49 48 49 (9) Are the settings of your web browser correct? Q2. Not able to log in the management program.A: You have 4 ways to check and solve the problem:(1) Close and re-open the IE browser and login the program again.(2) Log out and re-login the Windows OS. Then login the progra...
Page 52 - Specifications
WLBARGS Manual 50 51 50 51 50 51 Compliance Standard WLAN: IEEE802.11/IEEE802.11b/IEEE802.11gLAN: IEEE802.3/IEEE802.3u/IEEE802.3x Interface WAN: 10/100Mbps x 1 Port (RJ-45, Auto MDI/MDI-X)LAN: 10/100Mbps x 4 Ports (RJ-45, Auto MDI/MDI-X) Frequency Band 2.412~2.462 GHz Transmission speed IEEE802.11...
Page 53 - About corega
WLBARGS Manual corega 可瑞加科技於 1996 年成立於日本新橫濱,致力於提供多元化的家用 網路產品:包括乙太網路交換器、無線區域網路系列產品、路由器、藍芽系列產品、以及與網路相關的產品應用及服務。 corega 目前已是日本專業 家用網路產品的暢銷品牌,並且於 2002 年 2 月於台北成立可瑞加科技,專 注於台灣市場推廣高品質的日系家用網路設備。 corega 以使用者的需求導 向為最重要的營運方針,多樣化的產品行銷以及通路服務營造 corega 為最 親切適用的家庭網路設備第一品牌! 竭誠感謝您購買 corega 可瑞加系列產品,期待本產品為您帶來更快速便捷 的連線體...
Page 54 - Federal Communication Commission Interference Statement; to which the receiver is connected.; FCC Radiation Exposure Statement:; Appendix
WLBARGS Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a r...
Page 55 - memo