Allied Telesis AT-FS705LE - Manuals

x Note A note provides additional information. Caution A caution indicates that performing or omitting a specific action may result in equipment damage or loss of data. Warning A warning indicates that performing or omitting a specific action may result in bodily injury. Contacting Allied Telesyn Th...

AT-FS705LE Installation Guide xi Telephone or Fax Support For technical support via fax, please fill out the“Technical Support Fax Order” on page 35 and send it to the appropriate location listed below. Americas United States, Canada, Mexico, Central America, South AmericaTel: 1 (800) 428-483 5 Fax:...

xii E-mail Support United States and Canada [email protected] Latin America, Mexico, Puerto Rico, Caribbean, and Virgin Islands [email protected] United Kingdom, Sweden, Norway, Denmark, and Finland [email protected] Returning Products Products for return or repair m...

AT-FS705LE Installation Guide xiii FTP Server If you need a device driver for an Allied Telesyn device and you know the name of the driver, you can download the software by connecting directly to our FTP server at ftp://gateway.centre.com . At login, enter ‘anonymous’. Enter your e-mail address for ...

xiv For Sales or Corporate Information For sales or corporate information contact Allied Telesyn at one of the following locations: Tell Us What You Think If you have any comments or suggestions on how we might improve this or other Allied Telesyn documents, please fill out the “AT-FS705LE Installat...

1 AT-FS705LE Fast Ethernet Switch Overview The AT-FS705LE Ethernet Switch is a 10Base-T/100Base-TX unmanaged switch. The switch provides you with a simple, cost-effective solution for Ethernet switching between end nodes operating at either 10 or 100 Mbps. Figure 1 AT-FS705LE Ethernet Switch 1 Power...

2 Features The AT-FS705LE switch has the following features: ❑ Five auto-negotiating 10/100 Mbps twisted pair ports with RJ-45 connectors ❑ One Uplink port for connecting the AT-FS705LE switch to another switch or hub without a crossover cable ❑ IEEE 802.3 and IEEE 802.3u compliant ❑ External power ...

AT-FS705LE Installation Guide 3 Figure 3 Back Panel Physical Description The physical description for the switch includes: ❑ Ports 1 through 4 ❑ Port 5 and the Uplink port ❑ LEDs ❑ Power supply Ports 1 Through 4 Ports 1 through 4 can operate at either 10 Mbps or 100 speed and in either full- or half...

4 The ports are IEEE802.3u Auto-Negotiation compliant. This means that the ports can automatically configure their speed and duplex mode to match the capabilities of the end nodes connected to the ports. Port 5 and the Uplink Port Port 5 and the Uplink port allow you to connect an additional worksta...

AT-FS705LE Installation Guide 5 Front Panel LEDs Refer to Table 1 for a description of the device LEDs. Table 1 LED Functions LEDs Color Description Power Green On means there is power to the switch. Off means there is no power to the switch. 100M Green On means the port speed is 100 Mbps. Off means...

6 Power Supply The AT-FS705LE uses an external power adapter that comes standard with the switch. Fdx/Hdx Green On indicates the port is operating in full-duplex mode. Off indicates the port is operating in half-duplex mode. Table 1 LED Functions (continued) LEDs Color Description

AT-FS705LE Installation Guide 7 Network Topologies Figure 4 illustrates a network that consists of one AT-FS705LE Ethernet Switch used to interconnect four workstations and a server. In this configuration, the Uplink port is not used. Figure 4 Single AT-FS705LE Switch Topology Uplink 5 4 3 2 1

8 Figure 5 illustrates a network of two AT-FS705LE Ethernet Switches that have been interconnected using the Uplink ports on the two units. Using the Uplink ports eliminates the need for a cross-over cable to interconnect the switches. Figure 5 Multiple AT-FS705LE Ethernet Switch Topology Uplink 5 4...

AT-FS705LE Installation Guide 9 Installing the Switch This section contains the procedures for installing the switch. Verifying the Package Contents Make sure that the package includes the following items. If any of the items are damaged or missing, contact your Allied Telesyn representative immedia...

10 Selecting a Site Make sure you observe the following site requirements: ❑ Make sure you are placing the switch in a dust-free and moisture-free environment. ❑ Do not block the ventilation openings on the unit. Allow at least 10 centimeters (4 inches) of space at the front and back of the unit for...

AT-FS705LE Installation Guide 11 ❑ Observe the following cabling specifications: Reviewing Safety Guidelines Please review the following safety guidelines before you begin to install the Ethernet switch. Warning Power cord is used as a disconnection device: To de- energize equipment, disconnect the ...

AT-FS705LE Installation Guide 13 Installing the Unit on a Desktop To install the switch on the desktop, perform the following procedure. To mount the unit on a wall, perform the steps “Installing the Unit on a Wall” on page 14. 1. Attach the four self-adhesive rubber feet to the bottom of the switch...

14 5. Attach the data cables to the switch ports. Do not use a cross-over cable to connect workstations or servers to ports 1 through 5. Do not use a cross-over cable to connect another switch or hub to the Uplink port. Note You can use either port 5 or the Uplink port on an AT-FS705LE switch, but y...

AT-FS705LE Installation Guide 15 Note For wall-mount installation, you must supply the two screws and plastic anchors or other material necessary to physically mount the switch to the wall. 3. Install two plastic anchors and two pan-head screws into the wall, separated by 5 centimeters (approximatel...

16 Do not use a cross-over cable to connect another AT-FS705LE switch to the Uplink port. Note You can use either port 5 or the Uplink port, but you cannot use both simultaneously. 8. Go to the procedure “Verifying and Troubleshooting the Installation” on page 16. Verifying and Troubleshooting the I...

AT-FS705LE Installation Guide 17 ❑ Check to be sure that the power outlet has power by connecting another device to it. ❑ Try replacing the power adapter with another power adapter. 2. Check the Link/Act LED for each port. The LED should be lit steady or flashing. If a Link/Act LED is OFF, check the...

18 ❑ Check to be sure that you are using Category 5 cable. Warranty Registration When you have finished installing the unit, you should register your product by completing the enclosed warranty card and sending it in, or by visiting our web site at www.alliedtelesyn.com/forms/warranty.htm and comple...

AT-FS705LE Installation Guide 19 Technical Specifications Standards Compatibility: IEEE 802.3,IEEE802.3u Interfaces: RJ-45 connectors Physical Dimensions: W x D x H100 x 78.5 x 26 mm (3.93 x 3.09 x 1.02in.) Power Supply: Input: 7.5V @ 1A Power Consumption: 4W Environment Specifications: Operating Te...

22 Importante : questa appendice contiene traduzioni in più lingue degli avvisi di sicurezza di questa guida. Viktig : Dette tillegget inneholder oversettelser til flere språk av sikkerhetsinformasjonen i denne veiledningen. Importante : Este anexo contém traduções em vários idiomas das advertências...

35 Appendix B Technical Support Fax Order Name __________________________________ Company _______________________________ Address ________________________________ City ____________________________________ State/Province __________________________ Zip/Postal Code ________________________ Country ____...

36 Brief summary of problem _______________ _______________________________________ Conditions (List the steps that led up to the problem. _________________________ _______________________________________ _______________________________________ Detailed description (Please use separate sheet) Please...

37 Appendix C AT-FS705LE Installation Guide Feedback Please tell us what additional information you would like to see discussed in this guide. You can fax or mail this form to the mailing address and fax number at the bottom of the page. I found the following the most valuable _______ ______________...