Allied Telesis AT-9900 Series - Manuals

Features in 276-02 5 Version 276-03C613-10474-00 REV B Level 2 CR Module Level Description AR44x / AR450 AR7x5 AR750S Rapi er i A T- 8800 A T- 8600 A T- 8700 XL A T- 8948 A T- 9900 A T- 9800 CR00000529 IPv6, PIM6 2 When a better route for multicast traffic became available, PIM for IPv6 did not reca...

Features in 276-01 28 Version 276-03C613-10474-00 REV B Features in 276-01 Software Maintenance Version 276-01 includes the resolved issues and enhancements in the following tables. In the tables, for each product series: ■ “Y” in a white column indicates that the resolution is available in Version ...

Features in 276-01 31 Version 276-03C613-10474-00 REV B CR00010996 Port Authentication 2 When port authentication was using a RADIUS server, it sometimes stopped working after several hours. This was because port authentication generated RADIUS Accounting Request (STOP) messages with an incorrect Ac...

Features in 276-01 35 Version 276-03C613-10474-00 REV B Level 4 CR00011664 PERM 3 The IAC (interpret as control) characters (0xFF) are escaped when sent across the permanent assignment connection. If TCP could not send the entire buffer, the two IAC characters were previously split up, which resulte...

Features in 276-01 36 Version 276-03C613-10474-00 REV B Enhancements CR Module Level Description A R 400 A R 7x5 A R 750 S Ra p ie r i AT -8 8 0 0 AT -8 6 0 0 A T -87 00X L AT -8 9 4 8 AT -9 9 0 0 AT -9 8 0 0 CR00010196 BGP, IP gateway, Switch - A new feature enables you to set the maximum length of...

Adding Static ARP Entries with Multicast MAC Addresses (CR00011204) 37 Version 276-03C613-10474-00 REV B Adding Static ARP Entries with Multicast MAC Addresses (CR00011204) This Software Version allows you to add ARP entries with multicast MAC addresses and allows the router or switch to accept pack...

Adding Static ARP Entries with Multicast MAC Addresses (CR00011204) 38 Version 276-03C613-10474-00 REV B To see whether macdisparity is enabled or disabled, use the command: show ip For an example of how to use ARP entries with multicast MAC addresses, see Guideline to Windows 2003 Network Load Bala...

Securing a Single VLAN through Switch Filters (CR00011271) 39 Version 276-03C613-10474-00 REV B Securing a Single VLAN through Switch Filters (CR00011271) On AT-8824, Rapier 24i, AT-8724XL and AT-8624 switches, this enhancement enables you to use switch filters to secure only the current VLAN, inste...

Securing a Single VLAN through Switch Filters (CR00011271) 40 Version 276-03C613-10474-00 REV B Configuring vlansecure To turn off the default behaviour, so that the filter prevents access to only the current VLAN when you move the host, use the new command: disable switch filter vlansecure To retur...

Making Asynchronous Ports Respond More Quickly (CR00011565) 41 Version 276-03C613-10474-00 REV B Making Asynchronous Ports Respond More Quickly (CR00011565) When an asynchronous port is in ten mode , it bundles together the characters that it receives within a certain time period, instead of passing...

Displaying Routes Learned from a Specific BGP Peer (CR00011724) 43 Version 276-03C613-10474-00 REV B Displaying Routes Learned from a Specific BGP Peer (CR00011724) This enhancement enables you to display: ■ the number of routes learned from a specific peer ■ information about each route learned fro...

Route Update Queue Length (CR00010196) 44 Version 276-03C613-10474-00 REV B Route Update Queue Length (CR00010196) When hardware learning delay is enabled (the default), the switch learns new routes in software, then places them into a queue for adding them to its hardware routing table. Defaults ha...

Permanent Assignments (CR00011355) 46 Version 276-03C613-10474-00 REV B Permanent Assignments (CR00011355) Permanent assignments provide a method for creating permanent links between terminal ports on routers. Any two terminal ports on a single router or on routers that can communicate with each oth...

Permanent Assignments (CR00011355) 47 Version 276-03C613-10474-00 REV B Figure 5: Example output from the show perm command If the two ports of the permanent assignment are on different routers, the add perm command must be entered on each router. If both ports are on the same router, the command on...

Permanent Assignments (CR00011355) 49 Version 276-03C613-10474-00 REV B Command Reference This section describes commands available on the router to configure and manage permanent assignments. add perm Syntax ADD PERM= perm-name LPORT= lport RPORT= rport IP= ipadd where: ■ perm-name is the name of t...

Permanent Assignments (CR00011355) 50 Version 276-03C613-10474-00 REV B Related Commands delete permreset permset permshow perm delete perm Syntax DELete PERM= perm-name where perm-name is the name of the permanent assignment. The name is case sensitive and must be identical on each router in the pe...

Permanent Assignments (CR00011355) 51 Version 276-03C613-10474-00 REV B reset perm Syntax RESET PERM= perm-name where perm-name is the name of the permanent assignment. The name is case sensitive and must be identical on each router in the permanent assignment. If the name contains spaces, it must b...

Permanent Assignments (CR00011355) 52 Version 276-03C613-10474-00 REV B set perm Syntax SET PERM= perm-name [LPORT= lport ] [RPORT= rport ] [IP= ipadd ] where: ■ perm-name is the name of the permanent assignment. The name is case sensitive and must be identical on each router in the permanent assign...

Permanent Assignments (CR00011355) 53 Version 276-03C613-10474-00 REV B show perm Syntax SHOW PERM[= perm-name ] where perm-name is the name of a permanent assignment Description This command displays the name, local and remote ports and remote IP address for all permanent assignments currently defi...