Allied Telesis AT-8100S/48POE - Manuals

9 Figure 1: Front Panels of the 8100L Series Switches........................................................................................................... 23Figure 2: Networking Ports and SFP Slots on the 8100L Series Switches.......................................................................

11 Tables Table 1: Hardware Features of the 8100L Series Switches ................................................................................................ 22Table 2: Hardware Features of the 8100S Twisted Pair Series ..............................................................................

Preface 14 Document Conventions This document uses the following conventions: Note Notes provide additional information. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data. Warning Warnings inform you that performing or omitting a...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 15 Contacting Allied Telesis If you need assistance with this product, you may contact Allied Telesis technical support by going to the Support & Services section of the Allied Telesis web site at www.alliedtelesis.com/sup...

17 Chapter 1 Overview This chapter contains the following sections:  “Features” on page 18  “8100L Series Switches” on page 22  “8100S Twisted Pair Series Switches” on page 24  “8100S Fiber Optic Series Switches” on page 27  “Back Panels” on page 30  “Management Panels” on page 32  “Model Nam...

Chapter 1: Overview 18 Features Here is a list of the switches and their features: 8100L and 8100S Models Here are the 8100L and 8100S Series switches:  AT-8100L/8  AT-8100L/8POE  AT-8100L/8POE-E  AT-8100S/24C  AT-8100S/24  AT-8100S/24POE  AT-8100S/48  AT-8100S/48POE  AT-8100S/16F8-SC  AT-...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 21 Fanless Models Here are the 8100L and 8100S Series switches that do not have fans:  AT-8100L/8 Switch  AT-8100S/24 Switch  AT-8100S/24C Switch  AT-8100S/48 Switch

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 23 Front Panels The front panels of the 8100L Series switches are shown in Figure 1. Figure 1. Front Panels of the 8100L Series Switches Front Panel Components Figure 2 identifies the Fast and Gigabit Ethernet networking ports...

Chapter 1: Overview 24 8100S Twisted Pair Series Switches The five twisted pair models in the 8100S Series are listed here:  AT-8100S/24C  AT-8100S/24  AT-8100S/24POE  AT-8100S/48  AT-8100S/48POE For information on the fiber optic models, refer to “8100S Fiber Optic Series Switches” on page 27....

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 27 8100S Fiber Optic Series Switches The three fiber optic models in the 8100S Series are listed here:  AT-8100S/16F8-SC  AT-8100S/16F8-LC  AT-8100S/24F-LC Hardware Features Table 3 lists the hardware features of the fiber ...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 29 Figure 6. Front Panels of the 8100S Fiber Optic Series Switches (Continued) Fiber Optic Ports Table 4 lists the general specifications of the fiber optic ports on the fiber optic switches. AT-8100S/24-LC 100Base-FX Fiber Co...

Chapter 1: Overview 30 Back Panels Figure 7 shows the back panels of the single power supply switches. Figure 7. Back Panels of the Single Power Supply Switches AC Power Connector AT-8100L/8 and AT-8100S/24C Switches AC Power Connector AT-8100L/8POESwitch

Chapter 1: Overview 32 Management Panels Figure 9 identifies the components in the management panel on the 8100L Series switches. Figure 9. 8100L Series Management Panel Figure 10 identifies the components in the management panel on the 8100S Series switches. Figure 10. 8100S Series Management Panel...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 33 Model Naming Conventions The hardware features of the switches are represented by the letters and numbers in the model names. The conventions for the twisted pair 8100L and 8100S Series switches are identified in Figure 11....

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 35 10/100Base-TX Twisted Pair Ports The switches have 8, 24, or 48 10/100Base-TX ports. Speed The ports can operate at either 10 or 100 Mbps. The speeds may be set manually using the management software or automatically with A...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 37 10/100/1000Base-T Twisted Pair Ports The switches have two 10/100/1000Base-T ports. These ports are paired with SFP slots to form combo ports. Speed The ports can operate at 10, 100, or 1000 Mbps. The speeds may be set manu...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 39 SFP Slots The switches have two slots for 100Mbps 100Base-FX or 1000Mbps 1000Base-SX/LX fiber optic transceivers. The transceivers can be used to connect the switches to other network devices over large distances, build a h...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 41 Power Over Ethernet The AT-8100L/8POE, AT-8100L/8POE-E, AT-8100S/24POE, and AT-8100S/48POE Switches feature Power over Ethernet (PoE) on the 10/100Base-TX ports. PoE is used to supply power to network devices over the same ...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 47 LEDs Here are descriptions of the switch’s LEDs. 10/100Base-TX Twisted Pair Port LEDs The 10/100Base-TX twisted pair ports have link/activity and duplex mode LEDs. Figure 13. 10/100Base-TX Port LEDs The LEDs are described i...

Chapter 1: Overview 50 SFP Slot LED Each SFP slot has one LED. Figure 16. SFP Slot LEDs The SFP slot LED is described in Table 14. Table 14. SFP Slot LED LED State Description Link/Activity Off The SFP slot is empty or the SFP module has not established a link to a network device. Solid green The SF...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 51 Stacking Port LEDs Each stacking port has one link LED labelled LINK/ACT. Figure 17. Stacking Port S1 and S2 LEDs The stacking port LED is described in Table 15. Note The stacking port LEDs do not indicate packet activity. ...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 53 Console Port The Console port is used to configure the features and parameter settings of the switch. This type of management uses serial RS-232 and is commonly referred to as local or out-of-band management because it is n...

Chapter 1: Overview 54 Power Supplies The 8100L Series switches have one AC power supply. The 8100S Series switches have two AC or DC power supplies, except for the AT-8100S/24C Switch, which has one AC power supply. The supplies are not field-replaceable and each has a separate AC or DC connector o...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 55 Power Connectors The 8100S Series switches have two AC or DC power supply sockets on the back panels, except for the AT-8100S/24C Switch, which has one AC power supply socket. The 8100L Series switches have one AC power sup...

57 Chapter 2 Beginning the Installation The chapter contains the following sections:  “Installation Procedures” on page 58  “Reviewing Safety Precautions” on page 59  “Choosing a Site for the Switch” on page 63  “Unpacking the Switch” on page 64

Chapter 2: Beginning the Installation 58 Installation Procedures You may install the switch on a table or in an equipment rack. Perform these procedures to install the switch on a table:  “Reviewing Safety Precautions” on page 59  “Choosing a Site for the Switch” on page 63  “Unpacking the Switch...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 59 Reviewing Safety Precautions Please review the following safety precautions before you begin the installation procedure. Note The  indicates that a translation of the safety statement is available in a PDF document titled ...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 63 Choosing a Site for the Switch Observe these requirements when planning the installation of the switch.  If you plan to install the switch in an equipment rack, the rack should be safely secured so that it will not tip ove...

Chapter 2: Beginning the Installation 64 Unpacking the Switch Refer to the following tables to verify the contents of the shipping containers of the switches:  For the AT-8100L/8, AT-8100L/8POE, and AT-8100L/8POE-E Switches, refer to Figure 19 on page 65.  For the twisted pair and fiber optic 8100...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 67 AT-8100S/24C Switch The AT-8100S/24C Switch comes with the items listed in Figure 21. Figure 21. Components of the AT-8100S/24C Switch One AT-8100S/24C Switch One short rack mounting bracket One 2 m (6.6 ft) local managemen...

69 Chapter 3 Installing the Switch on a Table or in an Equipment Rack The procedures in this chapter are:  “Installing the Switch on a Table or Desktop” on page 70  “Installing the Switch in an Equipment Rack” on page 71

Chapter 3: Installing the Switch on a Table or in an Equipment Rack 70 Installing the Switch on a Table or Desktop You may install the switch on a table or desktop. Here are the guidelines to selecting a site:  The table should be level and stable.  The power outlet should be located near the swit...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 71 Installing the Switch in an Equipment Rack This procedure requires the following items:  Eight bracket screws (included with the switch)  Two equipment rack brackets (included with the switch)  Flat-head screwdriver (not...

77 Chapter 4 Cabling the Networking Ports This chapter contains the following procedures:  “Cabling the Twisted Pair and Fiber Optic Ports” on page 78  “Installing Optional SFP Transceivers” on page 80

Chapter 4: Cabling the Networking Ports 78 Cabling the Twisted Pair and Fiber Optic Ports This section contains the guidelines to cabling the twisted pair and fiber optic ports. Twisted Pair Ports Here are the guidelines to cabling the 10/100Base-TX and 10/100/1000Base-T twisted pair ports:  The ca...

Chapter 4: Cabling the Networking Ports 80 Installing Optional SFP Transceivers Review the following guidelines before installing optional SFP transceivers in the switch:  The SFP slots are part of combo ports, with 10/100/1000Base-T ports. For operational information, refer to “SFP Slots” on page ...

85 Chapter 5 Powering On the Switch This chapter contains the following procedures:  “Powering On an AC Switch” on page 86  “Powering On a DC Switch” on page 91  “Setting the Stack ID Number” on page 95  “Starting a Management Session” on page 99

Chapter 5: Powering On the Switch 86 Powering On an AC Switch To power on an AC switch, connect the power cords to the connectors on the back panels and to the appropriate power sources. All of the models have two power supplies with separate connectors, except for the AT-8100S/24C Switch and 8100L ...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 87 Consider the following items as you power on the switch:  Connecting the two power cords to power sources that are on different circuits will provide power redundancy to the switch in the event a circuit fails.  The AT-81...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 91 Powering On a DC Switch Perform this procedure to power on a DC 8100S Series switch: Warning As a safety precaution, install a circuit breaker with a minimum value of 15 Amps between the equipment and the DC power source. A...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 95 Setting the Stack ID Number After the switch has initialized its management software, examine the Stack ID LED on the front panel and do one of the following:  If the LED is displaying “0,” the installation procedure is co...

Chapter 5: Powering On the Switch 96 2. Connect the other end of the cable to an RS-232 port on a terminal or PC with a terminal emulator program. 3. Configure the terminal or terminal emulator program as follows:  Baud rate: 9600 bps (The baud rate of the Console Port is adjustable from 1200 to 11...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 99 Starting a Management Session You may use the following methods and tools to manage stand-alone 8100L and 8100S Series switches:  Local management  Telnet client  Secure shell client  HTTP non-secure and HTTPs secure We...

Chapter 5: Powering On the Switch 100 Telnet management sessions are not secure and are vulnerable to snooping because the packets exchanged between the switch and your workstation are sent in plain text. The security of the switch may be jeopardized if an intruder captures the packet containing you...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 101  You need to assign your management workstation an IP address in the 169.254. n . n subnet or your workstation must have access to that subnet through routing devices. Refer to the AT-8100 Series AlliedWare Plus Command L...

103 Chapter 6 Troubleshooting This chapter contains suggestions on how to troubleshoot the switch if a problem occurs. Note For further assistance, please contact Allied Telesis Technical Support at www.alliedtelesis.com/support . Problem 1: The Stack ID LED on the front of the switch is off. Soluti...

107 Appendix A Technical Specifications Physical Specifications Dimensions (H x W x D) Weights Table 17. Product Dimensions AT-8100L/8AT-8100L/8POEAT-8100L/8POE-EAT-8100S/24C 4.4 cm x 33.0 cm x 20.3 cm(1.7 in. x 13.0 in. x 8.1 in.) AT-8100S/24AT-8100S/48AT-8100S/24F-LC 4.4 cm x 44.1 cm x 29.1 cm(1.7...

Appendix A: Technical Specifications 108 Ventilation Environmental Specifications AT-8100S/16F8-LC 4.4 kg (9.75 lb.) AT-8100S/24F-LC 4.4 kg (9.75 lb.) Table 19. Ventilation Requirements Recommended Minimum Ventilation on All Sides 10 cm (4.0 in) Table 18. Product Weights (Continued) Table 20. Enviro...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 109 Power Specifications Maximum Power Consumptions Input Voltages Table 22. Maximum Power Consumptions AT-8100L/8 9.1 watts AT-8100L/8POE 229.1 watts AT-8100L/8POE-E 229.1 watts AT-8100S/24C 18.3 watts AT-8100S/24 19.5 watts ...

Appendix A: Technical Specifications 110 Certifications Quality and Reliability AT-8100S/48 AC model: 100-240 VAC, 1.0 A maximum, 50/60 Hz per input AT-8100S/48POE AC model: 100-240 VAC, 3.0 A maximum, 50/60 Hz per input AT-8100S/16F8-SC AC model: 100-240 VAC, 1.0 A maximum, 50/60 Hz per input AT-81...

Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches 111 RJ-45 Twisted Pair Port Pinouts Figure 45 illustrates the pin layout of the RJ-45 connectors and ports. Figure 45. RJ-45 Socket Pin Layout (Front View) Table 26 lists the pin signals for 10 and 100 Mbps. AT-8100S/48 300,00...

Appendix A: Technical Specifications 112 Table 27 lists the pin signals when a port operating at 1000 Mbps. Fiber Optic Port Specifications Table 28 lists the specifications of the 100Base-FX fiber optic ports on the AT-8100S/16F8-SC Switch. Table 27. Pin Signals for 1000 Mbps Pinout Pair 1 Pair 1 +...

Appendix A: Technical Specifications 114 RJ-45 Style Serial Console Port Pinouts Table 30 lists the pin signals of the RJ-45 style serial Console port. Stacking Port Pinouts Figure 46 illustrates the pin layout of the S1 and S2 stacking ports. Figure 46. Stacking Port Pin Layout (Front View) Table 3...