Alliance TMB1276C- Manuals

Page 3 - Table of; Introduction

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT © Copyright 2012, Alliance Laundry Systems LLCAll rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. 70444801 1 ...

Page 5 - Laundry Management

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70444801 3 Shorted Thermistor Error...................................................................... 36Stove and Cabinet Limit Errors ............................................................ 36Auto Ignition Retry and Heat E...

Page 6 - Model Identification

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4 70444801 Introduction Model Identification Information in this manual is applicable to these models: Includes models with the following control suffixes: Nameplate Location The nameplate is located on the back of the machine and i...

Page 7 - Preliminary Information; About the Control; IMPORTANT: It is extremely important that the; DIP Switch Configuration; Power Failure Recovery

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5 70444801 Preliminary Information About the Control The UniLinc control on the tumble dryer is an advanced, graphical, programmable computer that lets the owner control most machine features by interacting with the control. UniLinc...

Page 8 - IR Communications Menu; Default Global Settings; Entering Program Mode

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Preliminary Information 70444801 6 IR Communications Menu The IR Communications Menu displays while the control is communicating with a PDA. The control will jump back to the previous page when the communication is complete. IR Comm...

Page 9 - UniLinc Identification; Operational Keypad

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7 70444801 UniLinc Identification Operational Keypad The control includes seven keypads. These functions are available to the operator and are intended to control and manage operation of the tumble dryer. Refer to Figure 5 and Table...

Page 10 - Operation Modes

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT UniLinc Identification 70444801 8 Operation Modes General Modes of Operation In each mode of operation, the user may press keypads or communicate with the control to change the displayed menu. Power-up Mode The control enters this m...

Page 11 - End of Cycle Mode; Extended Tumble Mode

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT UniLinc Identification 9 70444801 End of Cycle Mode The control enters End of Cycle Mode after the cool down segment is finished. The display will show a graphic prompting the user to open the loading door. If the door has not been ...

Page 12 - Machine Cycle Definition and Operation; Machine Cycle Operation; Time Dry Cycle; Cycle Menu; For Technical Service; Towels

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 10 70444801 Machine Cycle Definition and Operation There are 41 machine cycles that can be selected and run. Machine cycles can be modified or made “unavailable” by manually editing them in Modify Cycle Menu or by using the PDA or n...

Page 13 - To Start a Cycle

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Cycle Definition and Operation 11 70444801 To Start a Cycle 1. Press the or keypad to change cycles. 2. Press the keypad to move the cycle in the right most menu box to the center, highlighted position. 3. Press the keypad t...

Page 14 - Run Menu

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Cycle Definition and Operation 70444801 12 Run Menu Run Menu provides cycle and segment information while the machine is operating. Refer to Figure 7 . Figure 7 The Run Menu cannot be navigated by manipulating the arrow keyp...

Page 15 - Contrast/Backlight Menu; Contrast

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Cycle Definition and Operation 13 70444801 Contrast/Backlight Menu Press the keypad from Cycle Menu or Run Menu to enter the Contrast Adjust/Backlight Menu. The Contrast Adjust/Backlight Menu allows the user to adjust contra...

Page 16 - Machine ID

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Cycle Definition and Operation 70444801 14 Run Diagnostic Menu The Run Mode Diagnostic Menu allows user to access diagnostic information of the cycle currently running. The menu contains temperature and moisture, inputs and ...

Page 17 - Temp and Moisture Menu

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Cycle Definition and Operation 15 70444801 Temp and Moisture Menu A sub-menu of the Run Diagnostic Menu, the Temp and Moisture Menu is used to display detailed operating data and, if enabled, allow the user to change the pro...

Page 18 - Cycle Stopped Menu; Press START Key to Resume; Cycle Stopped; Press BACK Key to Exit; Fan Motor Contactor; Press STOP Key to Abort Cycle

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Cycle Definition and Operation 70444801 16 Cycle Stopped Menu The Cycle Stopped Menu will be displayed in Pause Mode. Press to resume the cycle or to abort the cycle and go to the Open Door Menu. The Cycle Stopped Menu will ...

Page 19 - Open Door Menu; Extended Tumble in 0:50; Clean Lint Screen; Is the machine basket empty?; Yes

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Cycle Definition and Operation 17 70444801 Open Door Menu Figure 15 The Open Door Menu is displayed from the Run Menu prior to a completed cycle. The time until Extended Tumble is shown at the top of the display.Open the doo...

Page 20 - Menu Navigation; The UniLinc; Menu to Menu Navigation

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 18 70444801 Menu Navigation The UniLinc The front-end control allows the user to control machine operation and programming by pressing keypads to select options on the display menus and by navigating between display menus.The user c...

Page 21 - Display Screen Maps; System Menu Map Tree

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Menu Navigation 19 70444801 Display Screen Maps Refer to the following charts for maps of all of the display menus. System Menu Map Tree Figure 19 Cycle Menu System Menu Diagnostic Menu Run Menu Service Menu Close Door Menu Contrast...

Page 22 - Run Menu Map Tree

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Menu Navigation 70444801 20 Run Menu Map Tree Figure 20 Service Menu Map Tree Figure 21 TMB1310R Cycle Menu Service Menu System Menu Contrast/Backlight Menu Close Door Menu . . . . . . Clean Lint Screen Menu Contrast/Backlight Menu ...

Page 23 - Programming UniLinc; Diagnostic; Program

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 21 70444801 Programming UniLinc System Menu The System Menu allows the user to access: cycle programming, diagnostics and laundry management. While on the Cycle Menu press and hold , then , then to enter the System Menu. The System ...

Page 24 - Program Menu; NOTE: All cycle numbers have to be scrolled; Modify Cycle

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 22 70444801 Program Menu Program Menu In System Menu, select Program and press . To program cycles, select Modify Cycle and press . To change properties that will affect the machine globally, select Global Setup (i.e., language disp...

Page 25 - for a chart of available; Available Characters

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Program Menu 23 70444801 NOTE: Refer to Table 2 for a chart of available letters, numbers and symbols. Cycle Type can be modified by pressing the or keypad while Cycle Type is highlighted. Press the keypad to move to Material Type (...

Page 26 - Modify Cycle Segment Menu Navigation; NOTE: The reversing features will not be available

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Program Menu 70444801 24 Cycle, Segment and Step Programming Flow Diagram Figure 26 Modify Cycle Segment Menu Navigation Modify Cycle Segment Menus are a subgroup of the Modify Cycle Menu and the navigation is very similar to the na...

Page 27 - Global Setup Menu; NOTE: Menus related to cycle operation are the; Language; Deutsch

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 25 70444801 Global Setup Global Setup Menu The Global Setup Menu allows the user to make changes to global properties of the machine. Use the , , , and keypads to navigate the menu. Select a menu item by pressing the keypad. Press t...

Page 28 - Banners Menu; Wednesday; Current Date

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Global Setup 70444801 26 Date/Time Menu The Date/Time Menu is used to set the date, day of the week, time, and daylight saving option. Press and keypads to move the highlighted box through the different items in the menu. Once the i...

Page 29 - Rapid Advance Menu; Audio Menu; Enable the Rapid Advance; Key Pad

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Global Setup 27 70444801 Rapid Advance Menu The Rapid Advance Menu has the option of whether the user will be able to rapid advance through segments while the machine is operating. Press the , , or keypad to change the selection. Al...

Page 30 - Miscellaneous Menu; Ignition Retry Menu; Number of Cycles Between; Number of Retries

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Global Setup 70444801 28 Miscellaneous Menu The Miscellaneous Menu allows the user to set whether or not multi-segment cycles may be programmed, the number of cycles between lint screen reminders and display limit errors. Disabling ...

Page 31 - Temperature Menu; Units

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Global Setup 29 70444801 Temperature Menu The Temperatures Menu allows the user to set global temperatures for High, Medium, Low, Very Low and what unit of measure to display them in. These temperature ranges are restricted to those...

Page 32 - Cool Down Menu; Temperature; Advanced Options for

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Global Setup 70444801 30 Cool Down Menu The Cool Down Menu gives the user the option to setting the Cool Down Target Temperature and Time. The or keypads are used to move the highlighted box between the two items in the Cool Down Me...

Page 33 - Factory Defaults Menu; Audio Only; Restore all cycles and global

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Global Setup 31 70444801 Factory Defaults Menu The Factory Defaults Menu is used to set parameters in the software back to the factory default. Several parameters can be set individually back to the factory settings and all Cycles a...

Page 34 - Diagnostics; Test Cycle Menu; Test; Alarms; Test Cycle; Inputs and; Diagnostics Are Disabled; PRESS

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 32 70444801 Diagnostics Diagnostic Menu The Diagnostic Menu contains Test, Alarm and Machine ID Menus. The menus contain specific diagnostic information and manufacturing data for the machine. The , , and keypads position the highli...

Page 35 - Test Cycle Chart

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Diagnostics 33 70444801 Test Cycle Chart STEP Test Cycle Step Display Description STEP ADVANCE COMMENTS 1 Keypad Test Step “Press Each Key To Advance” Advance after all keypads are pressed. 2 Loading and Lint Door Test Step “Door St...

Page 36 - Inputs Outputs Menu

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Diagnostics 70444801 34 Inputs Outputs Menu When the Inputs Outputs Menu is accessed through the Diagnostic Menu, the user can manually turn on outputs. The user can scroll through the outputs using any of the arrow keys, the cursor...

Page 37 - Alarms Menus

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Diagnostics 35 70444801 Alarms Menus The Alarms Menu contains three screens of information. On the first screen, Alarms (1 of 3), the eight most recent alarms will contain Cycle Number, Segment Number, Alarm Type, and the Date/Time ...

Page 38 - Machine Errors; PDA Communications Error; NOTE: On some models the stove and cabinet limit

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 36 70444801 Machine Errors The control displays and logs errors as they occur. When the control senses the error condition, the audit counter for that error increases by one. The control saves the time and date of the last eight (8)...

Page 39 - Air Flow Switch Errors

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Errors 37 70444801 Auto Ignition Retry and Heat Error (Gas Models Only) If the Ignition Control Module (ICM) fails to ignite the gas valve the ICM will send an ICM Lockout Alarm to the control. When the control receives the ...

Page 40 - Moisture Sensor Error

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Errors 70444801 38 Moisture Sensor Error While in Idle Mode and on the Cycle Menu, the control will begin to monitor the moisture sensor input after one minute without user input. If the moisture sensor circuitry detects a l...

Page 41 - Laundry Management Menus

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 39 70444801 Laundry Management Laundry Management Menus The Laundry Management Menu contains three screens. The Laundry Management 1 Menu displays total cycle counts, total run hours, total heat hours, total number of rapid advance ...

Page 42 - Maintenance; Monthly; Daily Maintenance Reminders:

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 40 70444801 Maintenance Service Schedule Menu Press from Cycle Menu to enter Service Schedule Menu. The Service Schedule Menu provides a user with a time based service reminder list. The list is broken up into “Daily”, “Monthly”, “Q...

Page 43 - Quarterly Maintenance Reminders:

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance 41 70444801 Quarterly Menu (Service) The Quarterly Menu contains all service reminders that need to be performed four times a year. Press the keypad to return to Service Menu. Bi-Annual Menu (Service) The Bi-Annual Menu ...

Page 44 - Cycle Charts

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 42 70444801 Cycle Charts Cycle No. Cycle Name Cycle Type Material Type Reversing Temperature Target Moisture or Time 1 Towels Moisture Dry Cotton OFF 190°F/88°C 1% 2 Sheets Blend Moisture Dry Bedding ON 160°F/71°C 5% 3 Sheets Cotton...