Page 3 - Table of Contents
© Copyright 2011, Alliance Laundry Systems LLCAll rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. Table of Contents © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TR...
Page 4 - Daily; Beginning of the Day
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 2 F232178 Daily IMPORTANT: The door lock should be checked daily to ensure proper operation. Also check that all safety and instruction stickers are on the machine. Any missing or illegible safety and/or instruction stickers should ...
Page 5 - End of the Day
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232178 3 Daily c. Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress. The door should not open. If the door lock and interlock are not functioning properly, disconnect power and call ...
Page 7 - Weekly
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232178 5 Weekly 1. For variable-speed models only , clean the AC drive box filter(s) weekly or more frequently as needed: NOTE: If the fan filter service indicator light is on, the fan filter must be cleaned immediately to prevent ...
Page 8 - Monthly
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 6 F232178 Monthly NOTE: Disconnect power to the machine at its source before performing the monthly maintenance procedures. 1. Use the following procedures to determine if the V-belt(s) require replacement or adjustment. Call a qual...
Page 12 - Quarterly
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 10 F232178 Quarterly NOTE: Disconnect power to the machine at its source before performing the quarterly maintenance procedures. 1. If necessary, tighten the door hinges and fasteners. Tighten anchor bolts, if necessary. 2. For mode...
Page 14 - Care of Stainless Steel
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 12 F232178 • Avoid contact with dissimilar metals to prevent galvanic corrosion when salty or acidic solutions are present. • Do not allow salty or acidic solutions to evaporate and dry on stainless steel. Wipe clean of any residues...
Page 15 - Beginning of the Day:
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232178 13 Daily Preventative Maintenance Checklist Machine: Week of: Operator: Days Checks 1 2 3 4 5 6 7 Observe All Safety Warnings! Beginning of the Day: 1. Inspect the water inlet valve hose connections on the back of the machin...