Alliance FLW1526C- Manuals

Page 3 - WARNING

803148 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and carefulness are facto...

Page 4 - Table of

© Copyright 2010, Alliance Laundry Systems LLCAll rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. 803148 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Ta...

Page 5 - Safety Information; Explanation of Safety Messages; DANGER

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3 803148 Safety Information Explanation of Safety Messages Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,” “WARNING,” and “CAUTION”) followed by specific instructions. These precaution...

Page 6 - NOTE: The WARNING and IMPORTANT

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information 803148 4 11. Do not repair or replace any part of the washer, or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you underst...

Page 7 - Installation; Dimensions and Specifications

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5 803148 Installation Dimensions and Specifications FLW2209N FLW2209N 28 in. (71.1 cm) 24 in. (61.0 cm) 26.875 in. (68.3 cm) 13.1 in. (33.3 cm) 3 1.1 in . (7 9 c m ) 2 in. (5.1 cm) 36 in . (9 1. 44 c m ) 1 4.6 in . (3 7.0 8 cm ) 38....

Page 8 - Before You Start; Tools

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 803148 6 Before You Start Tools For most installations, the basic tools you will need are: Figure 1 NOTE: If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the co...

Page 9 - Installing the Washer; Step 2: Position and Level the Washer

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 7 803148 Installing the Washer Step 1: Position Washer Near Installation Area Move washer so that it is within 4 feet (1.2 meters) of the desired area of installation. NOTE: For best performance and to minimize vibratio...

Page 10 - Step 3: Connect Fill Hoses; Water Supply

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 803148 8 NOTE: DO NOT slide washer across floor if the leveling legs have been extended, as legs and base could become damaged. Remove rubber feet from accessories bag and place on all four leveling legs. Verify that un...

Page 11 - Connecting Hoses

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 9 803148 Turn on the water supply faucets and flush the lines for approximately two minutes to remove any foreign materials that could clog the screens in the water mixing valve. NOTE: When installing in newly construct...

Page 12 - Risers; Step 4: Connect Drain Hose to Drain; IMPORTANT: Drain receptacle must be capable of; Standpipe Installation

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 803148 10 Risers Risers (or air cushions) may have to be installed if the pipes knock or pound when flow of water stops. The risers are more efficient when installed as close as possible to the water supply faucets (ref...

Page 13 - Step 5: Remove the Shock Sleeves and; Step 6: Wipe Out Inside of Wash Drum

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 11 803148 Step 5: Remove the Shock Sleeves and Shipping Brace Remove front access panel by removing the two screws at the bottom of the panel.Remove the five bolts and lockwashers from shipping brace with 9/16 in. wrenc...

Page 14 - Step 7: Plug In the Washer; Electrical Requirements; NOTE: The wiring diagram is located in the

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 803148 12 Step 7: Plug In the Washer Electrical Requirements (120 Volt, 60 Hertz with 3-Prong Grounding Plug) NOTE: The wiring diagram is located in the control hood. When plugging in the washer:  DO NOT overload circu...

Page 15 - Grounding Instructions; Step 8: Check Installation; Vending; Meter Case; Improper connection of the equipment-

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 13 803148 Grounding Instructions The washer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The ...

Page 16 - Operation; Operation Instructions; Step 2: Close Loading Door

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 803148 14 Operation Operation Instructions IMPORTANT: Prior to first wash, use an all- purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washtub. IMPORTANT: Remove all sharp ...

Page 17 - Step 3: Add Laundry Supplies; Dispenser drawer requires a special tool; CAUTION

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation 15 803148 Step 3: Add Laundry Supplies Open dispenser drawer. Measure and add low sudsing, high efficiency (HE) detergent (1), bleach (2) and fabric softener (3) to the dispenser drawer (refer to Figure 15 ). Close dispens...

Page 18 - Step 6: Set Soil Level; To Insert Money; START

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation 803148 16 Step 6: Set Soil Level Push Soil Level touchpad to select LIGHT, MEDIUM or HEAVY. Light indicates selection. Step 7: Insert Coin(s) or Card To Insert Money Insert coin(s) in coin slot. Check pricing as seen on di...

Page 19 - Indicator Lights; To reduce the risk of bodily injury, do not

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation 17 803148 Indicator Lights INSERT COINS/CARD INSERT COINS/CARD is lit to prompt the user to insert coins or card to satisfy the vend price. When INSERT COINS/CARD is lit, the digits show the vend price remaining to be sati...

Page 20 - Maintenance; User-Maintenance Instructions; IMPORTANT: To avoid possible property damage

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 803148 18 Maintenance User-Maintenance Instructions Lubrication All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary.Do not lubricate the ...

Page 21 - Reinstallation of Shipping Materials; Cleaning Foreign Object Trap; NOTE: The pump may have some water in it. Use a

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance 19 803148 Reinstallation of Shipping Materials To prevent damage while moving the washer, the shipping materials MUST be reinstalled.  Disconnect washer from electrical supply.  While supporting the front access panel,...

Page 22 - Troubleshooting; Washer Symptom

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 803148 20 Troubleshooting Try these troubleshooting tips before making a service call. They may save time and money. Washer Symptom Possible Cause/Solution Won’t Fill  Make sure power cord is plugged all the way into the electrical...

Page 24 - Contact Information; Alliance Laundry Systems; or attempt any servicing unless specifically

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 803148 22 Contact Information If service is required, contact the nearest Factory Authorized Service Center.If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact...

Page 26 - Fast Track for Installing the Washer; (Refer to the manual for more detailed information)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installer Checklist Fast Track for Installing the Washer (Refer to the manual for more detailed information) CHECK • Position Washer Near Installation Area. • Position and Level the Washer. CHECK CHECK CHECK CHECK • Wipe Out Inside ...