Alliance 801455R2- Manuals

Installation 801455 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Before You Start Tools For most installations, the basic tools you will need are: Electrical Refer to serial plate for specific electrical requirements. For more detailed information refer to section on Electri...

Installation 5 801455 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installing the Washer NOTE: If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a ch...

Installation 801455 6 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT IMPORTANT: Hoses and other natural rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subjected to. All hos...

Installation 7 801455 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Sink Installation For this type of installation, use the beaded tie-down strap (supplied in accessories bag) or use a large wire tie (available from your local hardware store), and secure the drain hose to the ...

Installation 801455 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Laundry Tub Installation For this type of installation, the drain hose MUST be secured to the stationary tub to prevent hose from dislodging during use. Use the beaded tie-down strap (supplied in accessories ba...

Installation 9 801455 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Remove rubber feet from accessories bag and place on all four leveling legs. Verify that unit doesn’t rock. Step 5: Remove the Shock Sleeves and Shipping Brace Remove front access panel by removing the two scre...

Installation 801455 10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 6: Wipe Out Inside of Washer Drum Before using the washer for the first time, use an all-purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside the drum. ...

Installation 11 801455 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT A junction box on the rear panel houses a terminal strip which furnishes supply output signals for the supply injection pumps.These are dry contacts. Voltage needs to be supplied. Refer to Figure 14 for the in...

Installation 801455 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Refer to step 5 for proper procedures whenever the unit is moved. Electrical Requirements (120 Volt, 60 Hertz with 3-Prong Grounding Plug) NOTE: The wiring diagram is located behind the control panel, inside t...

Installation 13 801455 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Grounding Instructions The washer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The ...

Installation 801455 14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Water Supply Requirements NOTE: Water supply faucets must fit standard 3/4 in. (19.1 mm) female garden hose couplings. DO NOT USE SLIP-ON OR CLAMP-ON CONNECTIONS. NOTE: Water supply faucets should be readily a...

Installation 15 801455 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Information for Handy Reference Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, WI 54971-0990 U.S.A. Date Purchased Model Number Serial Number Dealer’s Name Dealer’s Address Phone Number Service Ag...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installer Checklist Fast Track for Installing the Washer (Refer to the manual for more detailed information) CHECK CHECK • Connect Drain Hose to Drain Receptacle. • Position Washer Near Installation Area. CHECK CHECK CHECK CHECK • P...