Alliance 70420801- Manuals

Page 2 - Specifications and Dimensions

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Page 2 of 12 Specifications and Dimensions N/A = Not Applicable Specifications 200 Pound Noise level measured during operation at operator position of 3.3 feet (1 meter) in front of machine and 5.2 feet (1.6 meters) from floor. 66 d...

Page 3 - 00 Pound Tumble Dryer; Refer to; Cabinet Dimensions

Page 3 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 200 Pound Tumble Dryer Dimensions and Exhaust Outlet Locations Refer to Position and Level the Tumble Dryer to temporarily reduce the heights of these models. TMB2363N TMB2363N A B C D W H F Y X V TOP VIEW OF EXHAUST DU...

Page 4 - Electric and Gas Connection; NOTE: These figures are approximate dimensions only.; Models

Page 4 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electric and Gas Connection Locations for Gas Models NOTE: These figures are approximate dimensions only. TMB2357N C A B D Models Electrical Connection Gas Connection A B C D Diameter 200L/N 21 in. (533 mm) 81 in. (2057...

Page 5 - Electric and Steam Connection

Page 5 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electric and Steam Connection Locations for Steam Models TMB2358N A1 B1 B2 A2 D E F C Models Steam Inlet Diameter A1 A2 F 200S 3/4 in. NPT 37.625 in. (956 mm) 15.25 in. (387 mm) 88 in. (2235 mm) Models Steam Outlet Diam...

Page 6 - Position and Level the Tumble Dryer; Table 1; Required Make-Up Air Opening; free air

Page 6 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Position and Level the Tumble Dryer The tumble dryer may be moved with or without the skid. To remove the skid, unscrew the four shipping bolts, and discard them.To fit a 200 pound tumble dryer (with shipping skid) thro...

Page 7 - Exhaust Requirements; Figure 1; ONE MANIFOLD ASSEMBLY; Duct; Table 2

Page 7 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Exhaust Requirements Figure 1 TMB2019N 1 NOTE: Where the exhaust duct pierces a combustible wall or ceiling, the opening MUST be sized per local codes. 2 Outlet Duct Diameter 3 45° Typical L K J I H G F E D C B A 3 1 2 ...

Page 8 - Figure 2; Table 3; TWO MANIFOLD ASSEMBLIES

Page 8 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT TMB2018N 1 NOTE: Where the exhaust duct pierces a combustible wall or ceiling, the opening MUST be sized per local codes. 2 Outlet Duct Diameter 3 45° Typical Figure 2 Duct Stations 200 Pound 12 in. (305 mm) Duct A 17 i...

Page 9 - Gas Requirements; For converting Non-CE Models from Natural Gas to; High Altitude Orifice Sizing; For proper operation at altitudes above 2000 feet (610; Natural

Page 9 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Gas Requirements For converting Non-CE Models from Natural Gas to L.P. Gas: 200 Pound Models - M4975P3 High Altitude Orifice Sizing For proper operation at altitudes above 2000 feet (610 meters), the gas orifice size mu...

Page 10 - Electrical Requirements; For 200 Pound Tumble Dryer Models

Page 10 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Requirements For 200 Pound Tumble Dryer Models Serial Plate Rating Terminal Block Connections Required Rated Current* Breaker Rating Recommended Wire Size 200-208V/60Hz/3ph L1, L2, L3 and ground 14 20A - 3 p...

Page 11 - Steam Requirements; Figure 3; SUPPLY; Model; Table 6

Page 11 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Steam Requirements Figure 3 TMB2024N NOTE: Refer to Table 6 for sizing of steam lines. Piping must also be sized accordingly for length of runs and number of elbows. 1 Risers 12 in. (305 mm) 6 18 in. Drop (457 mm) 2 Sh...

Page 12 - Loading Door Strike; The loading door strike must be adjusted to have; Figure 4; Belt Drive

Page 12 of 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Loading Door Strike The loading door strike must be adjusted to have sufficient tension to hold loading door closed against force of load tumbling against it. Proper adjustment is when 8-15 pounds (35.6-66.7 N) pull is...