Alliance 513123- Manuals

Before Drying Energy Saving Tips • Make sure the lint filter is always clean.• Do not overload the dryer.• Do not overdry items.• Remove items to be ironed while still damp.• Large loads of similar fabrics dry the most efficiently. However, dry permanent press in smaller loads to prevent wrinkling. ...

Operating Your Dryer WARNING To reduce the risk of fire, electric shock, serious injury or death to persons, read the Safety Information sec- tion before operating the dryer. W520 Available Drying Cycles NOTE: Use the automatic cycles for drying items that can be dried wih heat. These cycles automat...

3. Add clothes loosely into dryer drum. Add fabric softener sheet, if desired. NOTE: To avoid damage to dryer, do not use more than one fabric softener sheet per load. DRY2543N_SVG 4. Close loading door. Dryer will not operate with the door open. DRY2026N_SVG 5. Select Fabric Selector. Follow garmen...

Maintenance Lubrication All moving parts are sealed in a permanent supply of lubricant orare equipped with oilless bearings. Additional lubrication will not benecessary. Care of Your Dryer WARNING To reduce the risk of an electric shock, serious injury or death, disconnect the electrical service to ...

Lint Filter The lint filter is located at the front of the dryer in the lower partof the door opening. CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. Remove lintfilter cover, clean lint filter and replace cover. Annually remove lintfilter and screw to vacuum the duct under it. DRY2025N_SVG IMPORTANT...

Dryer Symptom Possible Cause/Solution Clothes are too wrinkled • Check heat setting. Overdrying can cause wrinkling.• Check load size. Large loads may not tumble properly and may cause wrinkling. Clothes have odor • Check room for odors before drying clothes. Any odor (fried foods, paint, varnish, c...