Alliance 135- Manuals

Page 3 - Table of Contents; Safety Information

Table of Contents Safety Information .................................................................................. 5 Explanation of Safety Messages ....................................................................... 5 Important Safety Instructions ..............................................

Page 4 - Disposal of Unit

Disposal of Unit .................................................................................... 63 4 © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Part No. D1341ENR8

Page 5 - Explanation of Safety Messages; DANGER; Important Safety Instructions; WARNING

Safety Information Explanation of Safety Messages Precautionary statements [“DANGER,” “WARNING,” and“CAUTION”], followed by specific instructions, are found in thismanual and on machine decals. These precautions are intendedfor the personal safety of the operator, user, servicer, and thosemaintainin...

Page 6 - Safety Decals

warnings or precautions. To reduce the risk of poisoning orchemical burns, keep them out of the reach of children at alltimes [preferably in a locked cabinet]. • Do not use fabric softeners or products to eliminate static un- less recommended by the manufacturer of the fabric softeneror product. • A...

Page 7 - Model Identification

Introduction Model Identification Information in this manual is applicable to these models: CH018 CHG150 CHR075 CHW305 IH025 IHG150 CH025 CHG165 CHR090 CHW400 IH030 IHG165 CH040 CHG185 CHU065 CHY018 IH040 IHG185 CH055 CHG235 CHU075 CHY025 IH055 IHG235 CH075 CHG305 CHU100 CHY040 IH075 IHG305 CH090 CH...

Page 9 - Nameplate Location; Figure 1; Replacement Parts

Nameplate Location The nameplate is located at the rear of the machine. Always pro-vide the machine’s serial number and model number when order-ing parts or when seeking technical assistance. Refer to Figure 1 . CFD900N_SVG 1 1. Nameplate Figure 1 Replacement Parts If literature or replacement parts...

Page 10 - Specifications and Dimensions; General Specifications

Specifications and Dimensions Specifications and Dimensions General Specifications Capacity lb. (l) 14 (65) 18 (75) 25 (100) 30 (135) 33 (150) 35 (165) Overall Dimensions Overall width 25.98 in.[660 mm] 25.98 in.[660 mm] 25.98 in.[660 mm] 30.71 in.[780 mm] 30.71 in.[780 mm] 30.71 in.[780 mm] Overall...

Page 12 - Table 1

General Specifications Capacity lb. (l) 14 (65) 18 (75) 25 (100) 30 (135) 33 (150) 35 (165) Vibration safety switch instal-led* NO NO NO NO NO NO Vibration safety switch instal-led** NO NO NO YES YES YES Direct Steam Heating (Optional) Steam inlet connection size 1 x 3/8 in. 1 x 3/8 in. 1 x 3/8 in. ...

Page 14 - Table 2

General Specifications Capacity lb. (l) 40 (185) 55 (235) 75 (305) 90 (400) Centrifugal Force Data Wash/reverse centrifugal force 0.04 - 0.95 0.04 - 1.00 0.05 - 1.00 0.05 - 1.00 Extract centrifugal force* 3 - 83 G 4 - 83 G 4 - 83 G 4 - 83 G Extract centrifugal force** 3 - 165 G 4 - 166 G 4 - 165 G N...

Page 15 - Figure 2

CFD746N_SVG G H F E D C B A 5 CFD747N_SVG P O L N M K J I CFD767N_SVG Z AA AK AL Y X W V U T S R Q 6 1 2 4 3 9 7 10 11 8 14 LB. (65 L), 18 LB. (75 L) AND 25 LB. (100 L) CAPACITY MODELS 1. Fill and Supply Ventilation 2. Direct Fill (Optional) 3. Hot Water Inlet 4. Cold Water Inlet 5. Flushing Supply ...

Page 17 - Table 3

Machine Capacity lb. (l) 14 (65) 18 (75) 25 (100) inch [mm] inch [mm] inch [mm] V 7.09 [180] 7.09 [180] 7.09 [180] W 2.95 [75] 2.95 [75] 2.95 [75] X 27.56 [700] 27.56 [700] 27.56 [700] Y 12.40 [315] 12.40 [315] 12.40 [315] Z 11.61 [295] 11.61 [295] 11.61 [295] AA 9.06 [230] 9.06 [230] 9.06 [230] AK ...

Page 18 - Figure 3

CFD748N_SVG G H F E D C B A 5 CFD756N_SVG P P P O L N M K J I CFD768N_SVG Z AA AK AL Y X W V U T S R Q 6 1 2 4 3 9 7 10 11 8 30 LB. (135 L) AND 35 LB. (165 L) CAPACITY MODELS 1. Fill and Supply Ventilation 2. Direct Fill (Optional) 3. Hot Water Inlet 4. Cold Water Inlet 5. Flushing Supply Dispenser ...

Page 20 - Table 4

Machine Capacity lb. (l) 30 (135) 35 (165) inch [mm] inch [mm] U 1.38 [35] 1.38 [35] V 7.87 [200] 7.87 [200] W 3.74 [95] 3.74 [95] X 33.66 [855] 33.66 [855] Y 13.98 [355] 13.98 [355] Z 13.19 [335] 13.19 [335] AA 10.63 [270] 10.63 [270] AK 8.27 [210] 8.27 [210] AL 11.42 [290] 11.42 [290] Table 4 Spec...

Page 21 - Figure 4

CFD757N_SVG G H F E D C B A 5 CFD769N_SVG P O L N M K J I CFD758N_SVG Z AA AK AL Y X W V U T S R Q 6 1 2 4 3 9 7 10 11 8 33 LB. (150 L) AND 40 LB. (185 L) CAPACITY MODELS 1. Fill and Supply Ventilation 2. Direct Fill (Optional) 3. Hot Water Inlet 4. Cold Water Inlet 5. Flushing Supply Dispenser 6. E...

Page 23 - Table 5

Machine Capacity lb. (l) 33 (150) 40 (185) inch [mm] inch [mm] V 7.87 [200] 7.87 [200] W 3.74 [95] 3.74 [95] X 33.66 [855] 33.66 [855] Y 14.02 [356] 13.98 [355] Z 13.19 [335] 13.19 [335] AA 10.63 [270] 10.63 [270] AK 8.27 [210] 8.27 [210] AL 11.42 [290] 11.42 [290] Table 5 Specifications and Dimensi...

Page 24 - Figure 5

CFD759N_SVG G H F E D C B A 1 CFD760N_SVG P O N M L K J I CFD906N_SVG Z AA AK AL Y X W V U T S R Q 3 2 4 5 6 7 9 10 11 8 55 LB. (235 L) CAPACITY MODELS 1. Flushing Supply Dispenser 2. Fill and Supply Ventilation 3. External Liquid Supply Inlets 4. Direct Fill (Optional) 5. Cold Water Inlet 6. Hot Wa...

Page 26 - Table 6

Machine Capacity lb. (l) 55 (235) inch [mm] V 7.87 [200] W 3.74 [95] X 39.96 [1015] Y 14.57 [370] Z 13.78 [350] AA 11.22 [285] AK 8.46 [215] AL 11.61 [295] Table 6 Specifications and Dimensions 26 © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Part No. D1341ENR8

Page 27 - Figure 6

CFD762N_SVG G H F E D C B A 1 CFD770N_SVG P O L N M K J I CFD871N_SVG Z AA AM AN AO AK AL Y X W V U T S R Q 3 2 4 5 8 6 7 9 11 12 13 10 75 LB. (305 L) AND 90 LB. (400 L) CAPACITY MODELS 1. Flushing Supply Dispenser 2. Fill and Supply Ventilation 3. External Liquid Supply Inlets 4. Direct Fill (Optio...

Page 29 - Table 7

Machine Capacity lb. (l) 75 (305) 90 (400) inch [mm] inch [mm] S 43.31 [1100] 43.31 [1100] T 17.13 [435] 17.13 [435] U 1.38 [35] 1.38 [35] V 10.83 [275] 10.83 [275] W 3.74 [95] 3.74 [95] X 41.14 [1045] 41.14 [1045] Y 15.16 [385] 15.16 [385] Z 14.37 [365] 14.37 [365] AA 11.81 [300] 11.81 [300] AK 8.4...

Page 30 - Dimensional Clearances

Installation Dimensional Clearances Table 8 and Table 9 show recommended minimum clearances on all sides of the machine. Recommended Minimum Clearances - 14 lb. (65 l), 18 lb. (75 l), 25 lb. (100 l), 30 lb. (135 l) and 33 lb. (150 l) Models Capacity lb. (l) 14 (65) 18 (75) 25 (100) 30 (135) 33 (150)...

Page 31 - Table 9; Machine Foundation; CAUTION

Recommended Minimum Clearances - 35 lb. (165 l), 40 lb. (185 l), 55 lb. (235 l), 75 lb. (305 l) and 90 lb. (400 l) Models Capacity lb. (l) 35 (165) 40 (185) 55 (235) 75 (305) 90 (400) Minimum front clearance (doorswing) 22.05 in. [560 mm] 22.05 in. [560 mm] 22.05 in. [560 mm] 22.05 in. [560 mm] 22.0...

Page 32 - Mechanical Installation; Frame Dimensions and Mounting Bolt Location; Figure 7

Floor Load Data - 35 lb. (165 l), 40 lb. (185 l), 55 lb. (235 l), 75 lb. (305 l) and 90 lb. (400 l) Models Capacity lb. (l) 35 (165) 40 (185) 55 (235) 75 (305) 90 (400) Kinetic Energy of the Cylinder,(N/m)* 7215 8840 12677 17253 21613 Kinetic Energy of the Cylinder, (N/m)** 12429 17431 24847 34046 N...

Page 33 - Mounting Bolt Hole Locations for Hardmount Models; Figure 8

Machine Capacity lb. (l) 14 (65) 18 (75) 25 (100) inch [mm] inch [mm] inch [mm] AB 1.18 [30] 1.18 [30] 1.18 [30] AC 21.65 [550] 21.65 [550] 21.65 [550] AD 23.94 [608] 23.94 [608] 23.94 [608] AE 1.18 [30] 1.18 [30] 1.18 [30] AF 1.77 [45] 1.77 [45] 1.77 [45] AG 9.17 [233] 9.17 [233] 9.17 [233] AH 12.8...

Page 35 - Figure 9

Mounting Bolt Hole Locations for Hardmount Models with 33 lb. (150 l), 40 lb. (185 l), 55 lb. (235 l), 75 lb. (305l) and 90 lb. (400 l) Capacity CFD858N_SVG AJ AI AH AG AC AD AB AE AF Figure 9 Machine Capacity lb. (l) 33 (150) 40 (185) 55 (235) 75 (305) 90 (400) in [mm] in [mm] in [mm] in [mm] in [m...

Page 36 - Mounting Bolt Installation (If Required); Surface; Anchoring On A Metal Base

Machine Capacity lb. (l) 33 (150) 40 (185) 55 (235) 75 (305) 90 (400) AJ 0.87 [22] 0.87 [22] 0.87 [22] 0.87 [22] 0.87 [22] Table 14 Mounting Bolt Installation (If Required) CAUTION Ensure that the machine is installed on a level floorof sufficient strength and that the recommendedclearances for insp...

Page 39 - Drain Connection

Capacity 33 lb. (150 l) 40 lb. (185 l) 55 lb. (235 l) 75 lb. (305 l) 90 lb. (400 l) Minimum foundationthickness Low Speed * 4 in. [102 mm] 6 in. [152 mm] 6 in. [152 mm] 8 in. [203 mm] 8 in. [203 mm] Medium Speed ** 12 in. [305 mm] 12 in. [305 mm] 16 in. [406 mm] 16 in. [406 mm] n/a Table 16 * For mo...

Page 42 - Water Connection

Water Connection WARNING To prevent personal injury, avoid contact with inletwater temperatures higher than 125° Fahrenheit [51°Celsius] and hot surfaces. W748 Machines may be delivered with either two, three, or four hoses,depending on the number of water inlets used on the machine.The hoses includ...

Page 44 - WRAS Water Connection; Electrical Installation

CFD859N_SVG 1 2 6 5 4 3 75 LB. (305 L) AND 90 LB. (400 L) CAPACITY MODELS 1. Air Cushions (Risers) 2. Water Supply Faucets 3. Double Check Valves 4. Filters 5. Hoses 6. "Y" Connector (Included with Machine) Figure 18 WRAS Water Connection To comply with WRAS (IRN R150) and Australian water r...

Page 58 - Electrical Connection; Machine without Electric Heating; Remote Liquid Supply Connection

Electrical Specifications Voltage Designation Hot/Cold Water Fill and Steam Heat Electric Heat Capaci-ty lb. (l) Code Voltage Cycle Phase Wire Full Load Amps Circuit Breaker U.S. [non - U.S.] AWG [mm2] Full Load Amps - Heating Element kw (Voltage) Circuit Breaker U.S. [non - U.S.] AWG [mm2] 90 (400)...

Page 59 - Chemical Injection Supply System; Steam Supply Information

Chemical Injection Supply System WARNING Dangerous Chemicals. May damage eyes and skin.Wear eye and hand protection when handling chemi-cals; always avoid direct contact with raw chemi-cals. Read the manufacturer’s directions for acci-dental contact before handling chemicals. Ensure aneye-rinse faci...

Page 61 - Primary 220 Volt Remote Liquid Supply Connection

Primary 220 Volt Remote Liquid Supply Connection IMPORTANT: When programming a supply step, sup-plies 1, 2 and 3 DO NOT control the relays shown on Figure 25 . Programming supply 1, 2 or 3 ONLY acti- vates water in compartment A, B or C. Programmingsupply 4 activates relay 1. Programming supply 5 on...

Page 62 - Automatic Lubricator; Control Function Test

The out-of-balance switch is mounted on the upper right side onthe back of the control panel. There is a window around the probeof the switch that is mounted on the movable part of the machine. When the machine goes out of balance by overloading or unevendistribution of the linen, the out-of-balance...