Alamo 6 - Manuals

Safety Section 1-1 © 2009 Alamo Group Inc. SAFETY SECTION

SAFETY SB5/6 03/09 Safety Section 1-2 © 2009 Alamo Group Inc. SAFETY General Safety Instructions and Practices A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be tothe owner/operator. Most accidents can be avoided by being aware of your equipme...

SAFETY SB5/6 03/09 Safety Section 1-15 © 2009 Alamo Group Inc. SAFETY Decal Description INFORMATION - Attention - Service Hydraulic System with Universal Tractor Hydraulic Oil. Alamo Group part Number 02966307. 02966305 NAME LOGO P/N 02974997 WARNING! Failure to INSPECT and REPAIR or REPLACE Hoses m...

SAFETY SB5/6 03/09 Safety Section 1-19 © 2009 Alamo Group Inc. SAFETY Federal Laws and Regulations This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal i...

Introduction Section 2-1 © 2009 Alamo Group Inc. INTRODUCTION SECTION

INTRODUCTION SB5/6 03/09 Introduction Section 2-2 © 2009 Alamo Group Inc. INTRODUCTION This Switch Blade is designed with care and built with quality materials by skilled workers. Proper assembly, maintenance, and operating practices, as described in this manual, will help the owner/operator get yea...

INTRODUCTION SB5/6 03/09 Introduction Section 2-4 © 2009 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERATING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely understand the Safety Messages and instructions, and know how to operate correctly both the tractor and i...

Operation Section 3-1 © 2009 Alamo Group Inc. OPERATION SECTION

OPERATION SB5/6 03/09 Operation Section 3-2 © 2009 Alamo Group Inc. OPERA T ION ALAMO INDUSTRIAL SWITCH BLADE SICKLE BAR OPERATING INSTRUCTIONS Alamo Industrial Switch Blade are manufactured with quality material by skilled workers. The Switch Blade isdesigned for cutting grass and weeds up to 1/2” ...

OPERATION SB5/6 03/09 Operation Section 3-3 © 2009 Alamo Group Inc. OPERA T ION 1.OPERATOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualified operator. A qualified operator has read andunderstands the implement and tractor Operator’s Manuals and is experienced in implement ...

OPERATION SB5/6 03/09 Operation Section 3-4 © 2009 Alamo Group Inc. OPERA T ION 2.TRACTOR REQUIREMENTS The tractor used to operate the mower must have the power capacity to lift, pull, and operate the Power TakeOff (PTO) at the mower’s rated speed while traveling at a ground speed between 2 and 5 MP...

OPERATION SB5/6 03/09 Operation Section 3-5 © 2009 Alamo Group Inc. OPERA T ION 2.4 Tractor Hydraulics The Switch Bar is controlled by two levers from the tractor cab. There are two cylinders on the unit one is the“tilt “and “Lift” cylinders. The tilt is used in conjunction with the tilt control lev...

OPERATION SB5/6 03/09 Operation Section 3-6 © 2009 Alamo Group Inc. OPERA T ION Do not mount or dismount the Tractor while the tractor is moving. Mountthe Tractor only when the Tractor and all moving parts are completelystopped. (SG-12) 3.1 Boarding the Tractor Use both hands and equipped handrails ...

OPERATION SB5/6 03/09 Operation Section 3-7 © 2009 Alamo Group Inc. OPERA T ION BEFORE leaving the tractor seat, always engage the brake and/or setthe tractor transmission in parking gear, disengage the PTO, stop theengine, remove the key, and wait for all moving parts to stop. Place thetractor shif...

OPERATION SB5/6 03/09 Operation Section 3-13 © 2009 Alamo Group Inc. OPERA T ION 6.DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport requires the operator possess a thorough knowledge of the model being operated andprecautions to take while driving with an attached implement. Ensure the tract...

OPERATION SB5/6 03/09 Operation Section 3-14 © 2009 Alamo Group Inc. OPERA T ION 6.1 Starting the Tractor The procedure to start the tractor is model specific.Refer to the tractor operator’s manual for startingprocedures for your particular tractor. Consult anauthorized dealer if the starting proced...

OPERATION SB5/6 03/09 Operation Section 3-15 © 2009 Alamo Group Inc. OPERA T ION 6.3 Driving the Tractor and Switch Blade Start off driving at a slow speed and gradually increase your speed while maintaining complete control of thetractor and mower. Moving slowly at first will also prevent the tract...

OPERATION SB5/6 03/09 Operation Section 3-16 © 2009 Alamo Group Inc. OPERA T ION Position Controls Always keep a careful lookout and use extreme care when workingaround overhead obstructions. Never allow the Mower head or boom within 10 feet of any power line. When working close to overheadpower lin...

OPERATION SB5/6 03/09 Operation Section 3-17 © 2009 Alamo Group Inc. OPERA T ION All operating positions of the mower are controlledwith two control valve levers. The 'lift' function controlpermits selection of Up, Lock, or Down position andthe 'tilt' control may be placed in one of four positions;U...

OPERATION SB5/6 03/09 Operation Section 3-19 © 2009 Alamo Group Inc. OPERA T ION 7.5 Operating the Switch Blade Only operate the unit from the tractor operator’s seat with the seatbelt securely fastened on a ROPS or cabequipped tractor. The unit is designed for roadside mowing of grass and small wee...

OPERATION SB5/6 03/09 Operation Section 3-20 © 2009 Alamo Group Inc. OPERA T ION 7.6 Shutting Down the Switch Blade To shut down implement, first bring the tractor to acomplete stop. Decrease engine RPM to idle thendisengage implement. The implement will come toa complete stop within a suitable amou...

OPERATION SB5/6 03/09 Operation Section 3-21 © 2009 Alamo Group Inc. OPERA T ION 8.TRACTOR AND SWITCH BLADE STORAGE Properly preparing and storing the unit at the end of the season is critical to maintane its appearance and tohelp ensure years of dependable service. The following are suggested stora...

OPERATION SB5/6 03/09 Operation Section 3-22 © 2009 Alamo Group Inc. OPERA T ION Never allow children or other persons to ride on the Tractor or Implement.Falling off can result in serious injury or death. (SG-10) The control valve incorporates load holdingcomponents which will keep the bar locked i...

OPERATION SB5/6 03/09 Operation Section 3-25 © 2009 Alamo Group Inc. OPERA T ION 9.2 Hauling the Tractor and Implement Before transporting a loaded tractor and implement,measure the height and width dimensions and grossweight of the complete loaded unit. Ensure that theload will be in compliance wit...

Maintenance Section 4-1 © 2009 Alamo Group Inc. MAINTENANCE SECTION

MAINTENANCE SB5/6 03/09 Maintenance Section 4-2 © 2009 Alamo Group Inc. MAINTENANCE LUBRICATION INFORMATION For continued good cutting and trouble-free operation, it is important to follow these instructions accurately. Shut off the tractor engine and remove key before lubricating the mower. Greasin...

MAINTENANCE SB5/6 03/09 Maintenance Section 4-3 © 2009 Alamo Group Inc. MAINTENANCE INITIAL HYDRAULIC SYSTEM CLEANING After the first 100 hours of operation, or if the filter condition gauge shows in the red area when the oil is above 100°F drain, clean and replace the filter. Replace the oil after ...

MAINTENANCE SB5/6 03/09 Maintenance Section 4-4 © 2009 Alamo Group Inc. MAINTENANCE CUTTERBAR ADJUSTMENTS Lead : The lead angle of the cutter bar is preset at the factory at 3/16" per foot. The lead may be changed, if desired. To reduce the lead, move the washers from the outside of the cutter b...

MAINTENANCE SB5/6 03/09 Maintenance Section 4-5 © 2009 Alamo Group Inc. MAINTENANCE 3. Sight down the bar and look for a knife section in close contact with a guard ledger. If the section to theright and left are both 1/8" if the ledger, DO NOT bend the two side ones up until they contact the kn...

MAINTENANCE SB5/6 03/09 Maintenance Section 4-7 © 2009 Alamo Group Inc. MAINTENANCE HYDRAULIC SYSTEM PUMP & MOTOR The pump and motor is the heart of the hydraulic circuit and is vital to the performance of all Triumph mowers. Worn pumps and motors should be replaced or repaired. It is recommende...

MAINTENANCE SB5/6 03/09 Maintenance Section 4-8 © 2009 Alamo Group Inc. MAINTENANCE LEDGER PLATES Triumph rock guards use bolt-on ledger plates. It is not necessary to remove the guards from the cutter bar. Follow this simple procedure to remove the ledgers. (Remove the knife from the mower first.) ...

ALAMO-INDUSTRIAL LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipalpurchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser 1.02. Manufactu...