AIWA XD-DW5U - Manuals

Main unit (left side) 1 2 Display window 1 DC IN 9V jack 2 i DISC OPEN por tion 1 Playback indicator 2 DVD indicator 3 Q SURROUND indicator 4 Angle indicator 5 Repeat playback indicators } : Disc repeat 1 } : Chapter/title/track repeat } A-B : A-B repeat 7 8 1 2 3 4 5 6 6 Battery indicator 7 Chapter...

5 ENGLISH Remote control 2 3 1 4 6 7 8 9 0 ! @ # $ %^ & *( ; \ ] [ )- ' 5 = 1 PROGRAM button 2 MARK button 3 0-9 buttons 4 +10 button 5 TOP MENU button 6 j , l , i , k , ENTER buttons 7 v RETURN button 8 a button 9 ONSCREEN DISPLAY ON/OFF button 0 POWER button ! REPEAT button @ Q SURROUND button...

Remote control Installing batteries Detach the battery cover on the rear of theremote control, and insert two R6 (size AA)batteries with 0 and 9 aligned correctly. When to replace the batteries The maximum operational distance between theremote control and the sensor of the unitsshould be approximat...

7 ENGLISH Using the battery pack Charging the battery pack Charge the battery pack fully at the first time ofuse.Two adaptors are supplied with this unit. Torecharge the battery pack, use the larger one(AC-D920U). Do not recharge the battery packwhen it is connected to the DVD player. It maynot be r...

Connecting the battery pack tothe unit Fit the claws of the battery pack intothe latch slots on the bottom of thisunit. Push the battery pack up and intothe latch slots as shown below. Make sure that the battery pack is connectedfirmly. 1 2 Battery pack Disconnecting the battery pack Slide the latch...

Slide POWER switch on the mainunit toward ON to turn the power on. The power indicator lights.The power cannot be turned on by POWERof the remote control.When using with the battery pack, thepower may not be turned on at once. In thiscase, turn the power on again after 3seconds. If the unit is still...

About the symbol display The symbol will be displayed on the screen if your operation is prohibited by the unit or thedisc. Removing the disc Caution Make sure that the disc stops and iscompletely still before you remove the disc.If you touch the spinning disc, you mayhurt your finger. 1 Press s to ...

Playing back (continued) Still (Pause) Press a during playback. To return to normal playback Press c (Play) or a . NOTE This unit remembers the point at whichplayback was paused. Fast Forward, Reverse Press f or g on the remote control during playback. The program is fast forwarded or in rewound ath...

Skipping Press r or t during playback. • Skip to the next chapter or track: t The disc position advances one chapter ortrack each time the button is pressed. • Return to the previous chapter or track: r For DVD, video CD with PBC on, and audio CD:Pressing r once skips to the beginning of the chapter...

Information about On Screen Display (OSD) This unit features OSD Menu Icons showing disc information (title/chapter/track number, elapsedplaying time, audio/subtitle language, angle, and sound) and player information (repeat play, playmode, marker, etc.). Some icons only show the indicated informati...

1 2 3 4 5 Cancel (Normal display) 1 shows the track number.(See page 16.)While playing a video CD Version 2.0,if the “--” appears instead of the tracknumber, the PBC function is set toON. 2 shows the elapsed playing timeduring playback. 3 shows the audio information (VideoCD only). (See page 28.) 4 ...

To memorize the points While playing, press DISPLAY on themain unit or ONSCREEN DISPLAYON/OFF on the remote controlrepeatedly. The menu icons are displayed. To memorize the points with the MARKbutton Press MARK on the remote control whileplaying. Then go to step 3. Press j or l to select the “Mark f...

To restart play from thememorized point While the “Mark function” icon isdisplayed, press j or l to select a point. You can also use the number buttons (1-5)to select a point. Press c (Play) to start play. To restart play from the memorizedpoint with the MARK button 1 Press MARK while playing.2 Use ...

To delete a programed track On the programing screen, select “C” with j or l . Then press ENTER. The last programed number is canceled.You can also delete the last program with C onthe remote control. To clear the programed contents At the programing screen, select “AC” with j or l . Then press ENTE...

Repeat playback Either when playing, or while theresume function is active, pressDISPLAY on the main unit orONSCREEN DISPLAY ON/OFF onthe remote control repeatedly. The menu icons are displayed. Press j or l to select the “Repeat playback” icon. Press i or k to select the repeat mode. The repeat mod...

Displaying and changing subtitles When playing discs which contain subtitles, youcan display the subtitles on the screen orchange the language of the subtitles. Displaying subtitles While playing, press DISPLAY on themain unit or ONSCREEN DISPLAYON/OFF on the remote controlrepeatedly. The menu icons...

Changing the audio track Some DVDs have more than one audio track,such as soundtracks with different languages.While playing such a disc, you can change theaudio track to hear the different soundtracks. While playing, press DISPLAY on themain unit or ONSCREEN DISPLAYON/OFF on the remote controlrepea...

Changing setup values SET UP OPERATION 1 2 3 Basic operations Your DVD player comes from the factory with allthe basic items set properly.Change any other settings according to yourindividual setup and preferences. Press SET UP while the player isstopped. The setup screen is displayed. The setup scr...

Disc Languages Sets the language for displaying DVD discmenus.There are 3 items you can set. Audio Language: 1 At the initial setting screen, select “Disc Languages” by using i or k . Then press ENTER. 2 Use i or k to move the cursor (the yellow area) to select “Audio language”. 3 Press ENTER. 4 Use...

Disc Menu: 1 At the initial setting screen, select “Disc Languages” by using i or k . Then press ENTER. 2 Use i or k to move the cursor (the yellow area) to “Disc Menu”. 3 Press ENTER. 4 Use i or k to move the cursor (the yellow area) to the desired language.And press ENTER. Spanish: Show the Disc m...

TV Aspect There are 2 options for the television aspectratio.When your television is connected to this unitwith the connecting cable has a conventionalsize screen (4:3), refer to “NORMAL TV”.If the connected TV has a wide-screen (16:9),refer to “WIDE TV”. NORMAL TV: 1 At the initial setting screen, ...

Ratings Caution In some discs, the rating level mentioned onthe disc label is not registered inside thedisc. To check whether the lock setting isfunctional in this unit, carry out the locksetting procedures. 1 At the initial setting screen, select “Ratings” by using i or k . Then press ENTER. 2 Use ...

CONNECTION Connecting to external equipment Before connecting • Turn off the power of this unit and the equipment to be connected.• Refer to the instructions for the equipment to be connected. Connecting to a wide TV/an AV TV According to the type of connected TV, set the initial TV mode referring t...

Connecting to audio equipment without digital audio inputterminals Connecting to audio equipment with digital audio input terminals To AUDIO/OPTOUT jack To audio input jacks Audio connecting cable (supplied) To AUDIO/OPT OUT jack To optical audioinput jacks Optical connecting cable(not supplied) Con...

Connecting to an active speaker system To audio input jacks Audio connecting cable (supplied) CONTINUE ∗ 2 When a 96 kHz-24 bit disc is played, the audio signals are output in 48 kHz-16 bit. ∗ 1 This changes condensed audio signals to PCM and outputs them. Output sound from the optical output termin...

Connecting to a video camera You can enjoy contents of an external video camera through the liquid crystal display and stereospeakers of this unit. To set to the color system of connectedequipment Slide the PAL/NTSC switch on the right sideaccording to the color system of connectedequipment. NOTES •...

OTHERS Troubleshooting If something seems to be wrong with your DVD player, first check the items in the table below. 43 ENGLISH General The power does not turn on. • Connect the AC adaptor correctly or insert the battery pack correctly. (page 6-9) • Check that POWER switch is not set to HOLD. (page...

ENGLISH 44 Operations Playback does not start by pressing c (Play). Playback stops immediately. • The player is affected by condensation. (page 2) Wait approximately one or two hours. • If the disc is dirty, wipe it with a cleaning cloth.• Insert the disc correctly with the label side up. (page 10) ...

Code Language Code Language Code Language 6565 Afar 7285 Hungarian 8084 Por tuguese 6566 Abkhazian 7289 Armenian 8185 Quechua 6570 Afrikaans 7365 Interlingua 8277 Rhaeto-Romance 6577 Amharic 7378 Indonesian 8279 Romanian 6582 Arabic 7383 Icelandic 8285 Russian 6583 Assamese 7384 Italian 8365 Sanskri...

Interactive DVD With this DVD disc, the story is changeable byuser's selection, and/or the direction of view ischangeable. Title, chapter (DVD) A DVD disc is divided into large parts (title) andsmaller parts (chapter).Each part has a number which is called titlenumber or chapter number. OPT OUT jack...

Specifications Main unit Power supply DC 9 V Power consumption 18 W Weight Main unit: 670 g (23.5 oz) Battery pack: 560 g (19.6 oz) External dimensions XD-DW7:195 (W) × 26.9 (H) × 144 (D) mm (7 3 / 4 × 1 1 / 16 × 5 3 / 4 in.) XD-DW5:195 (W) × 31.9 (H) × 144 (D) mm (7 3 / 4 × 1 5 / 16 × 5 3 / 4 in.) ...

• Manufactured under license from Dolby Laborator ies. “Dolby” and the double-Dsymbol are trademarks of Dolby Laboratories.Confidential unpublished works. c 1992-1997 Dolby Laboratories. All rights reserved. • Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942and oth...

CAUTION <Note for CD-R/RW playback> This unit cannot play any CD-R/RW disc.Some CD-R/RW discs may be played back, however, we do not guarantee theiroperations. < Note for high temperatures > • To prevent a malfunction, deformation, or discoloration, please avoid placing theproduct in dir...