Page 2 - IMPORTANT SAFETY REMINDERS; (Read all instructions before using this appliance)
IMPORTANT SAFETY REMINDERS (Read all instructions before using this appliance) When using an electrical appliance, basic precaution should always be followed, including the following: 1. To reduce the risk of fire, electric shock, or injury, do not leave vacuum cleaner when plugged in. Unplug from o...
Page 3 - PARTS
PARTS 5 7 3 1 2 4 6 8 1. Floor nozzle 2. Telescopic rod 3. Storage clip 4. Air slide 5. Suction hose 6. Variable suction control 7. Automatic cord rewind 8. On/off switch - 3 -
Page 4 - ADDITIONAL REMINDERS
ADDITIONAL REMINDERS Switch off the vacuum cleaner immediately if the air intake or the floor brush or the telescopic rod becomes blocked. Before restarting the vacuum cleaner, remove the substance / dirt causing the blockage. 1. Never use the vacuum cleaner in the immediate vicinity of fire, combus...
Page 5 - ASSEMBLY
ASSEMBLY 1. Telescopic rod Assembly: Insert the rod to the air intake opening. Push the rod in until it locks into place Disassembly: Take the rod off from the air intake after disconnecting from the mains socket. 2. Assembling the telescopic rod and accessories 2.1: Insert the telescopic rod to...
Page 6 - OPERATION
Furniture brush Upholstery nozzle Floor nozzle settings : A: Hard floors = brush bar extended B: Carpets = brush bar retracted OPERATION Vacuum cleaning 1. Before using the device, first roll out a sufficient length of power cable and plug it into the mains socket. The yellow mark on the power cable...
Page 8 - CYCLONE CLEANING SYSTEM
CYCLONE CLEANING SYSTEM The cyclone vacuum cleaner function means the vacuum cleaner does not need a dust bag. The sucked up dirt is forced into the dust container by force of the air jet. The air is cleaned by a washable permanent filter in the dust container, motor protection filter and an exhaust...