Page 2 - WARNING; (Negligence could result in injury to people or damage to; GENERAL PRECAUTIONS; PRECAUTIONS
- 2 - General Prohibitions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water General Precautions WARNING (Negligence could result in death or serious injury.) 1. Do not dismantle or alter the unit. Fire or electric shock could result.2. The unit must be installed and wire...
Page 3 - SYSTEM CONFIGURATION; System Configuration; GT Expanded System
- 3 - 1 SYSTEM CONFIGURATION 1-1 1-1 System Configuration a. GT expanded system (For details, see the GT Series Installation & Op- eration Manual.) Make sure to use GT-BCX, GT-DA(-L), GT-NS(-V), GT-DM(V). [1] Expanded Bus control unit GT-BCX[2] Distribution terminal (junction): Not included[3] Li...
Page 4 - Contents
- 4 - 2 CONTENTS 3 NAMES Contents Lift control adaptor GTW-LC (mounting bracket is included) Names [1] Bus line terminal[2] ID setting switch[3] Relay output terminal[4] Lock release lever GTW-LC [1] [4] [3] [2] [3]
Page 5 - MOUNTING; Mounting
- 5 - 4 MOUNTING Mounting [1] Din rail[2] Lock release leverMount GTW-LC to the Din rail.* To remove GTW-LC, pull the lock release lever down. GTW-LC cannot be mounted directly to the wall surface. GTW-LC [1] [2] [1]
Page 6 - WIRING
- 6 - 5 WIRING 1P NP 1P NP 1P NP [5] [4] GT-BC R1 4 2 3 1 R2 [2] DP R1R2 +– R1R2 GT-BCX RY20 RY1 GTW-LC #8 Max. 8 R1R2 GT-BCX RY20 RY1 GTW-LC #1 to Lift controller #9 to #16 (max. 8) 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP GTW-LC [3] [3] GT-BCX [1] R1 R2 GTW-LC GT Expanded System a +– ON 1 2 3 4 O...
Page 7 - Wiring
- 7 - Wiring a. GT expanded system (For details, see the GT Series Installation & Op- eration Manual.) [1] Expanded Bus control unit GT-BCX[2] Distribution terminal (junction): Not included[3] Lift control adaptor GTW-LC Maximum 16 adaptors (up to 8 adaptors per trunk) • ID: ID setting switch (f...
Page 8 - SETTING UP; Setup tool
- 8 - 6 SETTING UP 6-1 Setup tool * Completing settings with the setup tool is required.1. Install the setup tool in the PC (Windows 7/VISTA/XP ®) beforehand, and then enter the resident information. * For details on the setup tool, refer to the GT Series Installation & Op- eration Manual. Save ...
Page 9 - Lift Control 1; Lift Control 2; Data transfer
- 9 - 6-2 6-3 Lift Control 1 [1] GTW-LC ID[2] Select ON or OFF for the GTW-LC connection.[3] Select N.O. or N.C. for the Output Type.[4] Set the Timer. The time setting range is 1 to 600 sec. (one second increments) • Clicking the upper spin button will increase the time setting, and clicking the lo...
Page 10 - OPERATIONS
- 10 - 6-5 Combine Data The data entered in the GT-BCX can be combined with the data entered in the GT-NS(V), GT-MK or GT-DM(V), and this data can be saved as master data.* Import the data entered into the GT-NS(V), GT-MK, GT-DM(V) and GT-BCX before this process. 1. Select and open the corresponding...
Page 11 - Technical precautions
- 11 - 8 TECHNICAL PRECAUTIONS 9 SPECIFICATIONS Technical precautions • Operating temperature: 0 °C to +40 °C (+32 °F to +104 °F)• Repair requests: When units do not operate properly, contact a qualified technician for service. Specifications • Power supply: Supplied by GT-BC• Relay contacts: 20 AC/DC...
Page 12 - WARRANTY
- 12 - Aiphone warrants its products to be free from defects of material and workmanship under nor-mal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclos...