Page 3 - English; WARNING; (Negligence could result in death or serious injury to; CAUTION; (Negligence could result in injury to people or damage; GENERAL PRECAUTIONS; PRECAUTIONS; CONTENTS; Unit; PACKAGE CONTENTS
3 English English Nederlands Français Deutsch Español General Prohibitions Prohibition to Dismantle the Unit General Precautions WARNING (Negligence could result in death or serious injury to people) 1. Do not connect any non-specified power source to the V, V terminals, and do not install two power ...
Page 4 - MOUNTING; • Mount GT-AC from behind the front frame.; Power supply; The illustrations below use the GH system.
4 English Nederlands Français Deutsch Español MOUNTING 1. Fix the mounting bracket to the back (or surface-mount) box. 2. Connect the wires to the unit. 3. Mount GT-AC to the front frame. • Mount GT-AC from behind the front frame. • Insert the notch into the slots on both sides. 4. Options a.Rain ho...
Page 6 - FUNCTIONS SETTING UP
6 English Nederlands Français Deutsch Español FUNCTIONS SETTING UP This section explains the settings of each function, including the master code for management, the user code for unlocking, the buzzer and the LEDs. About the setting mode: Enter master code twice to switch to the setting mode, and e...
Page 7 - * The same code cannot be set for both the user code and the; Setting the code
7 English Nederlands Français Deutsch Español Input the master code twice. (Default: ) The result of each operation is indicated by the lighting up of the LED indicators on the upper section of the unit, and by the sounding of the buzzer. - When the key is pressed, the green LED lights up, the buzze...
Page 8 - External output setting; Reset Settings; Setting the relay output time
8 English Nederlands Français Deutsch Español External output setting (Default: OFF) Input the setting code. Illumination Illumination Blinks three times Blinking OFF OFF During lockout and forced entry output During Lockout During forced entry output During lockout and forced entry output · If the ...
Page 9 - Lockout
9 English Nederlands Français Deutsch Español · When the relay 1 output time is set to latched output, the auto-relock function is disabled. · When the auto-relock function is turned on, the unlock function of the request to exit/entry button of relay 2 is disabled. · If the 0 key illumination funct...
Page 10 - OPERATIONS; Orange LED lights up (during relay1 operation); TECHNICAL PRECAUTIONS
10 English Nederlands Français Deutsch Español OPERATIONS A. Unlocking of user code When the registered user code has been input using the keypad (between 4 and 6 digits), the LED indicator (group 1: orange, group 2: green) lights up, the buzzer sounds, and the electric door strike is unlocked. Oran...