Aiphone FK1629 B 0811YZ - Manuals

8 SYSTEM SETTING FLOW First of all, make the network settings. The network setting method differs according to the network environment. Select the fl ow suitable for your network environment from the chart below, and start the network settings after you fully understand it. After the network setting...

10 Flow 2 (All units: Static IP addresses are set) Write down the MAC addresses of all the IP units to be used in the system in advance by using the “Setting Information Memo” ( → P. 30) etc. The MAC address is labeled on each unit. * Decide the static IP address for each IP unit. Make the [ Network...

12 Complete the network settings for your site by following Flow 1 , Flow 2 or Flow 3 . ( → P. 9-11) Get the following information for the remote sites you will connect with your site. "Global IP address""Connection port: global""Connection Password" Set the following setting...

13 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM STARTING UP THE SYSTEM AND PREPARING FOR THE SETTINGS The system settings are mainly made on the PC by accessing the web browser for the settings incorporated with the IP unit as the IP host unit. It is recommended to use only one PC fo...

15 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM THE SYSTEM SETTING DETAILS The basic setting procedure When you have logged in to the system, the setting window appears. You can make the settings on this window. Make sure to refer to the on-screen instructions and comments displayed ...

16 Making network settings to each IP unit [Network setting: Individual] Make the settings for network to each IP unit connected to the system according to your requirements. Click 1 Network setting: Individual in the table of contents. Make the settings on the following items displayed in 2 the set...

17 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Setting the administrator ID and password[Administrator setting] We recommend that you change the administrator ID and password from default to unique ones for security purposes. This setting can be made to each of the IP units in your ...

18 Registering areas and remote sites [System setting – Area/Site registration] Required Register areas (for separating stations in your site) and/or remote sites. The number to which a name is entered is registered as an area or site number. Up to 99 areas and/or sites (up to 31 for sites only) can...

19 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Registering IP units [System setting – IP unit registration] Register IP units by selecting from the connected ones to the system. To register a PC master station, fi rst install the application * (IS-SOFT) to a PC, then connect the PC ...

20 Registering stations [System setting – Registering stations] Register all the stations connected in the system, and set the area, station no. and station name to them. Click 1 Registering stations in the table of contents. Set the area, station no. and station name to the 2 target stations. Setti...

21 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Making detailed settings to stations [System setting – Advanced station settings] Make detailed settings for the registered stations. The settings can be made to a station individually, or multiple stations of the same type at a time. T...

22 B Settings on [Other] window [Transmit volume boost at PTT]: • Select whether to increase the press-to-talk sound volume transmitted to the stations (ON) or not (OFF). [Camera zoom image preset]: • Select the default of camera’s Zoom/Wide function at calling from the 9 zoom positions and "0&#...

23 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Registering stations to zones[System setting – Zone setting] Assign stations to the registered zones. Click 1 Zone setting in the table of contents. Select a zone from the pull-down menu. 2 Click 3 Reference to display all the registere...

24 Setting transfer schedule [Transfer setting – Transfer schedule setting] You can set a weekly transfer schedule and individual daily schedule. The settings can be made 1 year ahead. * Click 1 Transfer schedule setting in the table of contents. Make the settings by clicking 2 Weekly schedule and I...

25 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Setting the timer [Timer setting] Set the time for each operation. Click 1 Timer setting in the table of contents. Set the time for the following operations respectively. 2 The setting range is displayed on the right side of each * inpu...

27 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Video setting Click 1 Video setting in the table of contents. Set the following settings for video quality. 2 [Frame Rate]: • Set the frame rate selecting “1”, “2”, “5”, “7.5”, “10” or “15”   fps from the pull-down menu. [Quality]: • Se...

28 E-mail setting You can send an e-mail when calling or send error messages etc. by e-mail. Up to 3 mail addresses can be set. NOTES: Prepare an e-mail account for this function beforehand. • Make sure to enter the system name at • [Network setting: Individual] – [System name] to display the title ...

29 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM MAINTENANCE This section describes the use of functions for the system maintenance. These functions are available on the web server. Initializing the system [Initialization] You can reset the system settings to factory default. Access t...

30 Setting Information Memo Record your settings information. It will need when resetting or maintenance. Host unit Network setting: Individual Static IP Address Subnet Mask Default GatewayPrimary DNS Server Secondary DNS Server MAC addressUnit nameConnection port Connection Password Network setting...