Agilent E5070BU - Manuals - manualsarea.com

Page 2 - Notices; Manual Printing History; Typeface Conventions

2 Notices The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright.All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prio...

Page 3 - General Information

3 1 General Information This chapter describes the Kit, contents of the kit, and required tools to install the Option 018 into the Agilent E5070B/E5071B.

Page 4 - Chapter 1; Option 018 Hard Disk Drive Kit; Description

4 Chapter 1 General Information Option 018 Hard Disk Drive Kit Option 018 Hard Disk Drive Kit The purpose of this kit is to install the option 018 Hard Disk Drive into the Agilent E5070B/E5071B. Contents of the Agilent E5070BU/E5071BU Option 018 Hard Disk Drive Kit The kit includes the parts listed ...

Page 5 - Option Installation

5 2 Option Installation This chapter describes the procedure to install the option 018 into the Agilent E5070B/E5071B.

Page 6 - Chapter 2; Introduction; Installation Requirement; CAUTION; Mounting Removable Hard Disk

6 Chapter 2 Option Installation Introduction Introduction This chapter describes the procedure to install Option 018 into the E5070B/E5071B. The procedure consists of the following items. • Installation Requirement • Removing Removable Hard Disk • Mounting Removable Hard Disk • Writing System Correc...

Page 7 - Update Procedure

Chapter 2 7 Option Installation Update Procedure Figure 2-1 Mounting/Removing Removable Hard Disk -1 Figure 2-2 Mounting/Removing Removable Hard Disk -2

Page 8 - RestoreSysCorFile Dialog Box

8 Chapter 2 Option Installation Update Procedure Writing System Correction Data of Backup Memory to Removable HDD The following is a description of the procedures to write the system correction data stored in the backup memory to the mounted removable HDD. Step 1. Turn on the E5070B/E5071B. Step 2. ...

Page 9 - Windows 2000 Professional Setup wizard

Chapter 2 9 Option Installation Update Procedure Initial Registration of E5070B/E5071B When you start up the E5070B/E5071B for the first time or after executing system recovery, you need to perform the initial registration of the Windows 2000 operating system of the E5070B/E5071B. NOTE You cannot us...

Page 10 - Windows 2000 Professional Setup dialog box; Network Identification wizard

10 Chapter 2 Option Installation Update Procedure Step 3. In the Windows 2000 Professional Setup dialog box, select the I accept this agreement box and click the Next > button (Figure 2-5). Then, the Windows 2000 operating system is restarted automatically. Figure 2-5 Windows 2000 Professional Se...

Page 12 - Calibration of the Touch Screen; Touch Panel Calibration Screen; Caution for replacing the spare HDD with the original HDD

12 Chapter 2 Option Installation Update Procedure Calibration of the Touch Screen When you have replaced the HDD on an E5070B/E5071B equipped with an Option 016 touch screen, you have to calibrate the touch screen. Follow the procedure described below to calibrate the touch screen. Step 1. Press . S...