AEG VAMPYR MULTI 3 IN 1- Manuals

AEG VAMPYR MULTI 3 IN 1– User Manual in PDF format online.

Manuals:

User Manual

User Manual AEG VAMPYR MULTI 3 IN 1

Summary

Page 4 - • The packaging cardboard can be taken to a recovered paper

34 Contents Description of appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Readying the appliance for use . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 7 - This appliance conforms with the following EU Directives:; Readying the appliance for use; Mounting the bottom rollers

37 ; This appliance conforms with the following EU Directives: • 73/23/EEC dated 19.02.1973 – Low Voltage Directive • 89/336/EEC dated 03.05.1989, (including Modification Directive 92/31/EEC) – EMC Directive. Readying the appliance for use Mounting the bottom rollers The bottom rollers are enclosed ...

Page 8 - Dry vacuum cleaning; If the appliance has been used for; Insert the filter

38 Dry vacuum cleaning PreparationImportant: If the appliance has been used for wet vacuum cleaning beforehand it must be absolutely dry for this purpose; dry the hose and pipes beforehand if necessary.The motor protection filter must always be inserted into the suction hole.The thin hose attached t...

Page 9 - Connecting the vacuuming hose and vacuuming pipes; Working with the nozzles when dry vacuuming; Universal flooring nozzle’s carpet nozzle; For cleaning carpeting and hard flooring.; Upholstery nozzle

39 Connecting the vacuuming hose and vacuuming pipes 0 Insert the hose inserts into the suction hole as in the picture and turn it to the right until it locks into place.To remove the vacuuming hose, twist the hose inserts to the left and remove. At the other end of the vacuuming hose, first connect...

Page 10 - Switching on the appliance; Before commencing dry vacuuming always ensure that the

40 Groove nozzle For vacuuming grooves, corners and narrow gaps. To ease comfort of use, the upholstery and groove nozzles can also be used with only one vacuuming pipe or can be connected directly to the handle of the vacuuming hose. Vacuuming brush For vacuuming furniture, PC keyboards etc. To eas...

Page 11 - Regulating the suction power; Slider for regulating the suction power; After dry vacuuming

41 Regulating the suction power The suction power can be decreased by actuating the suction power regulator located on the handle, e.g. when vacuuming curtains. Slider for regulating the suction power – closed = full suction power – open = decreased suction power After dry vacuuming 0 Turn the rotar...

Page 12 - Wet vacuum cleaning; Preparation

42 Wet vacuum cleaning Preparation 0 Prior to wet vacuuming always ensure that the paper filter, the fine paper filter and the foam filter have been removed.The motor protection filter must always be inserted into the suction hole.The thin hose attached to the motor head is required only for spray v...

Page 14 - Without a nozzle; Petrol, thinner, heating oil and other flammable liquids can

44 Without a nozzle Liquids can be directly vacuumed out of containers using the vacuuming hose, the vacuuming pipe or the groove nozzle.Remove these parts from the liquid prior to switching off the appliance to ensure that the vacuuming pipe is vacuumed clean. 0 Exercise caution when vacuuming from...

Page 15 - The rocker switch must not be; After wet vacuuming

45 Switching on the appliance 0 Before commencing wet vacuuming always remove the paper filter and the foam filter. 0 The rotary switch must be pointing to ”0”.The rocker switch must be pressed in the direction of the flooring nozzle symbol ” ”. Plug the cable into the power outlet:To switch the app...

Page 16 - Spray vacuum cleaning; When spray vacuum cleaning be sure to use only AEG

46 Spray vacuum cleaning 0 Only spray vacuum those surfaces and upholstery which are suitable to be wet vacuum cleaned. Do not wet fragile hand-woven carpets or carpets which are not colour-fast. Caution: When spray vacuum cleaning be sure to use only AEG detergent with foam inhibitor for spray vacu...

Page 18 - Working with the nozzles when spray vacuuming; Spray suction nozzle for carpet; For using water when cleaning carpeting; Hard flooring adapter

48 Working with the nozzles when spray vacuuming The nozzles are all attached to the vacuuming pipe by pressing and twisting and are removed by pulling and twisting. Spray suction nozzle for carpet For using water when cleaning carpeting 0 Attach the wide transparent nozzle to the end of the lower v...

Page 19 - Spray suction nozzle for upholstery

49 Spray suction nozzle for upholstery For using water when cleaning upholstery, car seats etc. For better handling, the small transparent nozzle can be connected directly to the handle of the vacuuming hose: 0 If necessary, unlock the pressure hose by turning it anti-clockwise and remove it if it i...

Page 20 - ”. Plug the cable into the power outlet: To; Spray vacuum cleaning of carpets

50 Switching on the appliance 0 While spray vacuuming and afterwards the room should be well aired in order to facilitate rapid drying. 0 The rocker switch must be pressed in the direction of the spray suction nozzle symbol ” ”. Plug the cable into the power outlet: To switch the appliance on, turn ...

Page 21 - Spray vacuum cleaning of hard flooring; ”, turn the rotary switch to ”0” and disconnect the power plug.

51 0 Important: The carpet should not be walked upon while it is still damp. 0 Caution: If the carpet has been shampooed at an earlier point in time, foam may collect in the dust container during cleaning and leak out of the air outlet.If this happens switch off the appliance and empty the dust cont...

Page 22 - Dismantling the spray vacuuming components

52 0 Important: Each time after spray vacuum cleaning the vacuuming hose should be cleaned of particles of dirt and fluff if necessary. Dismantling the spray vacuuming components 0 (Detach the spray suction nozzle’s pressure hose from the shut-off valve by turning the coupling piece anti-clockwise t...

Page 23 - Maintenance; Changing the filters

53 Maintenance Changing the filters 0 The paper filter is to be changed if the efficiency of the vacuuming decreases or if the filter is very soiled:Hold the paper filter by the cardboard edge and firmly press it onto the suction hole.The paper filter must touch closely against the side of the dust ...

Page 24 - Cleaning the cables, pumps, valves and spray nozzles; ” and turn; Hygiene when changing filters and emptying the dust container

54 Cleaning the cables, pumps, valves and spray nozzles 0 For practical reasons this cleaning is carried out directly after the appliance has been used for spray vacuuming.Pour approx. 2 litres of water into the detergent tank, place this into the dust container and attach the motor head.Plug the ca...

Page 26 - Replacement parts; Replacement filters and detergent concentrate

56 Replacement parts Replacement filters and detergent concentrate So that your appliance always functions properly, we recommend that you use original AEG replacement filters and detergent concentrate. The original AEG replacement filters and the detergent concentrate can be obtained from your spec...

Page 28 - Special accessories; Longlife wet and dry filters

58 Special accessories Longlife wet and dry filters ET no. 668 900 827 Professional set Ø 50 mm Vacuum system for coarse dirtIndividual components can be obtained from AEG Customer Service. Pipe reducer Ø 50 mm – Ø 32 mm Connecting piece for professional system and standard accessories Ø 30 mm ET no...