Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. OPERATION................................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • If the supply cord is damaged, it mus...
Page 5 - OPERATION
• Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer. • Be careful not to cause damage to the refrigerant circuit. It contains isobutane (R600a), a natural gas with a high level of environmental compatibility. This gas is f...
Page 6 - DAILY USE; Positioning the door
A medium setting is generally the most suitable. However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on: • room temperature, • how often the door is opened, • the quantity of food stored, • the location of the appliance. CAUTION! If the ambie...
Page 9 - TROUBLESHOOTING
7. TROUBLESHOOTING WARNING! Refer to Safety chapters. 7.1 What to do if... Problem Possible cause Solution The appliance does not op-erate. The appliance is switchedoff. Switch on the appliance. The mains plug is not con-nected to the mains socketcorrectly. Connect the mains plug tothe mains socket ...
Page 10 - Replacing the lamp
Problem Possible cause Solution Water flows on the floor. The melting water outlet isnot connected to the evapo-rative tray above the com-pressor. Attach the melting wateroutlet to the evaporativetray. The temperature in the ap-pliance is too low/too high. The temperature regulator isnot set correct...
Page 11 - Closing the door; INSTALLATION; Location; Electrical Connection
2. Detach the lamp cover in the direction of the arrows. 3. Replace the lamp with the one that has identical characteristics and is specifically designed for household appliances. 4. Reassemble the lamp cover. 5. Tighten the screw to the lamp cover. 6. Connect the plug to the mains socket. 7. Open t...
Page 12 - TECHNICAL DATA; Technical data; ENVIRONMENTAL CONCERNS
A B C D E • A - green and yellow: Earth • C - brown: Live • D - blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the...