Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. OPERATION................................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • If the supply cord is damaged, it mus...
Page 5 - OPERATION
• Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer. • Be careful not to cause damage to the refrigerant circuit. It contains isobutane (R600a), a natural gas with a high level of environmental compatibility. This gas is f...
Page 6 - DAILY USE; Positioning the door
A medium setting is generally the most suitable. However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on: • room temperature, • how often the door is opened, • the quantity of food stored, • the location of the appliance. CAUTION! If the ambie...
Page 8 - TROUBLESHOOTING
CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish. 6.3 Periodic cleaning CAUTION! Do not pull, move or damage any pipes and/or cables inside the cabinet. CAUTION! Take care of not to damage the cooling system. CAUTION! When moving the cab...
Page 10 - Replacing the lamp
Problem Possible cause Solution The temperature in the ap-pliance is too low/too high. The temperature regulator isnot set correctly. Set a higher/lower tempera-ture. The door is not closed cor-rectly. Refer to "Closing the door". The food products' tempera-ture is too high. Let the food pro...
Page 11 - Closing the door; INSTALLATION; Location; Electrical Connection
1 2 1 2. Replace the lamp with the one that has identical characteristics and is specifically designed for household appliances. 3. Reassemble the lamp cover. 4. Connect the plug to the mains socket. 5. Open the door. Make sure that the light switches on. 7.3 Closing the door 1. Clean the door gaske...
Page 12 - TECHNICAL DATA; Technical data; ENVIRONMENTAL CONCERNS
A B C D E • A - green and yellow: Earth • C - brown: Live • D - blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the...