AEG SKD71813C0- Manuals

Page 2 - CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. OPERATION.........................................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not store explosive substances such as aerosol cans with a flammable propellant...

Page 5 - OPERATION; Control Panel

• Do not change the specification of this appliance. • Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer. • Be careful not to cause damage to the refrigerant circuit. It contains isobutane (R600a), a natural gas with a hig...

Page 7 - FIRST USE; Cleaning the interior

3.8 Holiday function This function allows you to keep the appliance closed and empty during a long holiday period without the formation of bad odours. 1. Press the Mode until the corresponding icon appears. The Holiday indicator flashes. The temperature indicator shows the set temperature. 2. Press ...

Page 8 - DAILY USE; Positioning the door

5. DAILY USE WARNING! Refer to Safety chapters. 5.1 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. 1. Gradually pull the shelf in the direction of the arrows until it comes free. 2. Reposition as required. 5.2 Mo...

Page 10 - TROUBLESHOOTING

CAUTION! When moving the cabinet, lift it by the front edge to avoid scratching the floor. The equipment has to be cleaned regularly: 1. Clean the inside and accessories with lukewarm water and some neutral soap. 2. Regularly check the door seals and wipe clean to ensure they are clean and free from...

Page 12 - Replacing the lamp

Problem Possible cause Solution Food products preventthat water flows into thewater collector. Make sure that food productsdo not touch the rear plate. Water flows on the floor. The melting water outlet isnot connected to theevaporative tray above thecompressor. Attach the melting water out-let to t...

Page 13 - Closing the door; INSTALLATION; Positioning; Electrical Connection

8.3 Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre. 9. INSTALLATION 9.1 Positioning This appliance can be installed in a dry, well ventilated ind...

Page 14 - Ventilation requirements; NOISES; BRRR; OK

symbol or coloured green and yellow. 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured brown to the terminal either marked with the “L“ or coloured red. 4. Check that no cut, or stray strands of wire is present and the...

Page 15 - TECHNICAL INFORMATION; Technical data

CLICK! CLICK! SSSRRR! SSSRRR! BRRR! BRRR! HISSS! HISSS! BLUBB! BLUBB! CRACK! CRACK! 11. TECHNICAL INFORMATION 11.1 Technical data Height mm 1780 Width mm 560 Depth mm 550 Voltage Volts 230 - 240 ENGLISH 15

Page 16 - ENVIRONMENT CONCERNS

Frequency Hz 50 The technical information are situated in the rating plate, on the external or internal side of the appliance and in the energy label. 12. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environme...