Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION; Before the installation and use of the appliance,
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. OPERATION................................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not store explosive substances such as aerosol cans with a flammable propellant...
Page 7 - Storage of frozen food
accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand- new product, then dried thoroughly. CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish. 4.2 Positioning the door shelves To perm...
Page 8 - HINTS AND TIPS
4.6 Thawing Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer. 5. H...
Page 9 - CARE AND CLEANING
thus avoiding a rise in temperature of the latter; • lean foods store better and longer than fatty ones; salt reduces the storage life of food; • water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt; • it is advisable to show ...
Page 11 - Periods of non-operation; TROUBLESHOOTING
CAUTION! Do not touch frozen goods with wet hands. Hands can freeze to the goods. 3. Open the door. In order to speed up the defrosting process, place a pot of warm water in the freezer compartment. In addition, remove pieces of ice that break away before defrosting is complete. 4. When defrosting i...
Page 13 - Replacing the lamp; INSTALLATION; Location
Problem Possible cause Solution Temperature cannot be set. The "FROSTMATIC func-tion" is switched on. Switch off "FROSTMATICfunction" manually, or wait un-til the resets automatically toset the temperature. Refer to"FROSTMATIC function". The temperature in the ap-pliance is t...
Page 14 - Electrical Connection
Climateclass Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you h...
Page 15 - Ventilation requirements; NOISES; BRRR; OK
8.4 Ventilation requirements The airflow behind the appliance must be sufficient. 5 cm min. 200 cm 2 min. 200 cm 2 CAUTION! Refer to the assembly instructions for the installation. 9. NOISES There are some sounds during normal running (compressor, refrigerant circulation). BRRR ! HISSS! CL IC K! BL ...
Page 16 - TECHNICAL DATA; Technical data; ENVIRONMENTAL CONCERNS
BRRR! BRRR! HISSS! HISSS! BLUBB! BLUBB! CRACK! CRACK! 10. TECHNICAL DATA 10.1 Technical data Dimensions of the recess Height mm 1780 Width mm 560 Depth mm 550 Rising time Hours 20 Voltage Volts 230 - 240 Frequency Hz 50 The technical information is situated in the rating plate, on the external or in...