AEG SCN71800S0- Manuals

3 Fridge Temperature warmer button 4 Mode button 5 OK button 6 Freezer Temperature colder button 7 Freezer Temperature warmer button 8 Display It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change ...

1. Press the Mode button until the corresponding icon appears.The FROSTMATIC indicator flashes. 2. Press the OK button to confirm.The FROSTMATIC indicator is shown. This function stops automatically after 52 hours. To switch off the function before its automatic end:1. Press the Mode button until th...

Storage of frozen food When first starting-up or after a period out of use, before putting the products in the com - partment let the appliance run at least 2 hours on the higher settings. If large quantities of food are to be stored, remove all drawers and baskets from appliance and place food on c...

Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi - tioned as desired. For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the d...

• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time; • not open the door frequently or leave it open longer than absolutely necessary.• Once defrosted, food deteriorates rapidly and cannot be refrozen.• Do not exceed the storage period ind...

The absence of frost is due to the continuous circulation of cold air inside the compart - ment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions:• disconnect the appliance from electricity supply • ...

Replacing the lamp CAUTION! Disconnect the plug from the mains socket. 1. Press on the rear hook and at the same time slide the cover in the direction of the arrow. 2. Replace the lamp with one of the same power and specifically designed for household appliances. (the maximum power is shown on the l...

Positioning Install this appliance at a location where the ambient temperature corresponds to the cli - mate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Electrical Connection CAUTION...

2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured brown to the terminal either marked with the “L“ or col - oured red. 4. Check that no cut, or stray strands of wire is present and the cord clamp 4 is secure over the o...

Disconnect the parts (Ha), (Hb), (Hc) and (Hd). ca. 50 mm ca. 50 mm 21 mm 90° 90° 21 mm Install the part (Ha) on the inner side of the kitchen furniture. Ha Hc Push the part (Hc) on the part (Ha). 24 Installation

Hb Hd Press the part (Hd) on the part (Hb). Do a final check to make sure that:• All screws are tightened.• The sealing strip is attached tightly to the cabinet.• The door opens and closes correctly. NOISES There are some sounds during normal running (compressor, refrigerant circulation). BRRR! HISS...

CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is d...

3 Fridge Temperature warmer button 4 Mode button 5 OK button 6 Freezer Temperature colder button 7 Freezer Temperature warmer button 8 Display It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change ...

1. Press the Mode button until the corresponding icon appears.The FROSTMATIC indicator flashes. 2. Press the OK button to confirm.The FROSTMATIC indicator is shown. This function stops automatically after 52 hours. To switch off the function before its automatic end:1. Press the Mode button until th...

Storage of frozen food When first starting-up or after a period out of use, before putting the products in the com - partment let the appliance run at least 2 hours on the higher settings. If large quantities of food are to be stored, remove all drawers and baskets from appliance and place food on c...

Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi - tioned as desired. For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the d...

• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time; • not open the door frequently or leave it open longer than absolutely necessary.• Once defrosted, food deteriorates rapidly and cannot be refrozen.• Do not exceed the storage period ind...

The absence of frost is due to the continuous circulation of cold air inside the compart - ment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions:• disconnect the appliance from electricity supply • ...

Replacing the lamp CAUTION! Disconnect the plug from the mains socket. 1. Press on the rear hook and at the same time slide the cover in the direction of the arrow. 2. Replace the lamp with one of the same power and specifically designed for household appliances. (the maximum power is shown on the l...

Positioning Install this appliance at a location where the ambient temperature corresponds to the cli - mate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Electrical Connection CAUTION...

2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured brown to the terminal either marked with the “L“ or col - oured red. 4. Check that no cut, or stray strands of wire is present and the cord clamp 4 is secure over the o...

Disconnect the parts (Ha), (Hb), (Hc) and (Hd). ca. 50 mm ca. 50 mm 21 mm 90° 90° 21 mm Install the part (Ha) on the inner side of the kitchen furniture. Ha Hc Push the part (Hc) on the part (Ha). 24 Installation

Hb Hd Press the part (Hd) on the part (Hb). Do a final check to make sure that:• All screws are tightened.• The sealing strip is attached tightly to the cabinet.• The door opens and closes correctly. NOISES There are some sounds during normal running (compressor, refrigerant circulation). BRRR! HISS...

CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is d...