AEG S1583TK8- Manuals

6 Disposal Appliance Packaging Information All materials are environmentally sound! They can be disposed of orburned at an incinerating plant without danger.About the materials: The plastics can be recycled and are identified asfollows:>PE< for polyethylene, e.g. the outer covering and the bag...

7 Installation Installation Location The appliance should be set up in a well ventilated, dry room.Energy use and efficient performance of the appliance is affected bythe ambient temperature.The appliance should therefore– not be exposed to direct sunlight;– not be installed next to radiators, cooke...

Installation 8 If your refrigerator is installed undera continuous worktop, an air outletopening of at least 200 cm 2 and a ventilation grille (A/B) matching theworktop design should be installed atthe rear of the worktop.The cut surfaces of the worktop (C)should be varnished to avoid swellingdue to...

7. Unscrew the handle. Refit it on the oppo-site side after having pushed in the plugswith a punch. Cover the holes left openwith the plugs contained in the docu-mentation pack. Installation 9 Changing over the freezer compartment door 180 ° Plug socket The plug socket necessary for connec-tion of y...

Installation 10 Alternatively a concealed spur socket fitted with a 13 A fuse may befitted.If the socket is not accessible once the appliance is built in, the electri-cal installation must include suitable means of isolating the appliance from the mains (e.g. fuse, cut-out, current trip or similar w...

4.Upon completion there must be no cut, or stray strands of wire pre-sent and the cord clamp must be secure over the outer sheath. Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safe ly. Description of the Applian...

Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initialstart-up (see section: “Cleaning and Care”). ☞ ACTUAL temperature means:The temperature display indicates the temperature that is currentlypresent in the refrigerator or freezer compartment. The ACTUAL ...

14 Note: From a food safety point of view, +5°C for the refrigerator com- partment and -18°C for the freezer compartment should be con-sidered cold enough as a storage temperature. 5. Once the required temperature has been set, after a short period(approx. 5 sec.) the temperature display will change...

COOLMATIC Button The COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator, e.g. drinks and salads for a party. ☞ 1. The COOLMATIC function is switched on by pressing the COOLMATICbutton. The yellow light illuminates. 2. The COOLMATIC function now provides f...

16 Variable Inner Door The door compartments can be pulled up and removed, and inserted atother positions as needed. Interior Accessories Storage shelves/glass shelves Various glass or plastic storage shelves and wire trays are included withyour appliance - different models have different combinatio...

Interior Accessories 17 Variable Storage Box (not on all models, design differs depending on the model) Some models are equipped with a variable storage box which is fittedunder a door shelf compartment and can be slid sideways.The box can be inserted under every door shelf compartment. ☞ 1. To chan...

20 Preparation of Ice Cubes ☞ 1. Fill the ice cube tray 3/4 full with cold water, place it in the freezercompartment and leave to freeze. 2. To loosen the frozen cubes, either bend the ice cube tray or hold itunder running water for a few seconds. Important! Never try to free an ice tray that is fro...

21 ☞ 1. Switch on the FROSTMATIC function a few hours before defrosting tomake sure frozen food remains sufficiently frozen. 2. Remove frozen food, wrap it in several layers of newspaper and storeit, covered, in a cool place. 3. Switch off the appliance and unplug it, or disconnect from the elec-tri...

23 Energy Saving Tips • Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequentoperation of the compressor. • Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Neve...

What to do if ... 24 Temperature is set toocold. Press „+“ (WARMER) but-ton. Appliance cools too much. Heavy build up of frost,possibly also on the doorseal. Door seal is not air tight(possibly after reversingthe door). Carefully warm the leakingsections of the door sealwith a hair dryer (on acool s...

What to do if ... 25 Symptom Possible Cause Remedy Water on the floor or onstorage shelves. Water drain hole isblocked. See the “Cleaning andCare” section. Changing the light bulb Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or ...

26 Noises during Operation The following noises are characteristic of refrigeration appliances: • Clicks Whenever the compressor switches on or off, a click can be heard. • Humming As soon as the compressor is in operation, you can hear it humming. • Bubbling/Splashing When refrigerant flows into th...

27 Technical terminology • Refrigerant Liquids that can be used to a generate a cooling effect are known asrefrigerants. They have a relatively low boiling-point, indeed so low,that the warmth from the food stored in the fridge or freezer cancause the refrigerant to boil and vaporise. • Refrigerant ...