Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. CONTROL PANEL............................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • If the supply cord is damaged, it mus...
Page 6 - CONTROL PANEL; Switching on
3. CONTROL PANEL 1 2 3 4 1 Temperature scale 2 ECO mode icon 3 FROSTMATIC icon 4 Temperature key 3.1 Switching on 1. Plug the appliance into electrical mains socket. 2. To turn on the appliance, touch the temperature key until all LED indicators light up. After approximately 3 seconds LED indicators...
Page 7 - DAILY USE; Freezing fresh food; Storage of frozen food
3.5 ECO mode In this mode the temperature is set between +3 and +4°C. This is the best temperature to ensure good food preservation with minimal energy consumption. To activate ECO mode press the temperature key repeatedly until LED indicator next to ECO mode icon lights up. 3.6 FROSTMATIC function ...
Page 8 - CARE AND CLEANING
In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical data chart under "Rising time", the defrosted food must be consumed quickly or cooked immediately and then re- frozen (after cooling). 4.3 Sto...
Page 9 - TROUBLESHOOTING
to remove the typical smell of a brand- new product, then dried thoroughly. CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish. 5.2 Periodic cleaning CAUTION! Do not pull, move or damage any pipes and/or cables inside the cabinet. CAUTION!...
Page 11 - Replacing the lamp
Problem Possible cause Solution Temperature cannot be set. The FROSTMATIC or COOLMATIC function isswitched on. Switch off FROSTMATIC orCOOLMATIC manually, or waituntil the function resets auto-matically to set the tempera-ture. Refer to "FROSTMATICor COOLMATIC function". The temperature in t...
Page 12 - INSTALLATION; Positioning; Location; Levelling
7. INSTALLATION WARNING! Refer to Safety chapters. 7.1 Positioning This appliance can be installed in a dry, well ventilated indoor where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: Climateclass Ambient temperature SN +10°C to + 32°C N +16...
Page 13 - TECHNICAL DATA
7.4 Electrical Connection CAUTION! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. The wires in ...
Page 14 - ENVIRONMENTAL CONCERNS
9. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste...