Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. CONTROL PANEL............................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. 2. SAFETY INSTRUCTIONS 2.1 Installation WARNING! Only a qualified person must install this appliance. • Remove all the packaging and the ...
Page 5 - CONTROL PANEL; Switching on
• Do not store flammable gas and liquid in the appliance. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Do not touch the compressor or the condenser. They are hot. • Do not remove or touch items from the freezer compartment if your hand...
Page 7 - DAILY USE
4. DAILY USE 4.1 Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing the food to be frozen in the freezer compartment.Place the f...
Page 8 - CARE AND CLEANING; Cleaning the interior
2. Take out the filter from the plastic bag. 3. Insert the filter in the slot in the rear wall of the appliance. 4. Put on the filter cover. CAUTION! Make sure that the filter cover is always closed so that the filter functions correctly. To get the best performance the filter should be changed once...
Page 9 - Periods of non-operation; TROUBLESHOOTING
driven by an automatically controlled fan. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartm...
Page 11 - Replacing the lamp; INSTALLATION; Positioning; Location
Problem Possible cause Solution Side panels of the appli-ance are warm. This is a normal statecaused by operation of theheat exchanger. Make sure that there is at least30 mm of space between eachside of the appliance and thesurrounding furniture whenthe ambient temperature ex-ceeds 38°C. There is to...
Page 12 - Electrical Connection
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance betwe...
Page 13 - TECHNICAL DATA
The appliance is supplied with a 13 amp fuse ( B ). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely. 7.4 ...