AEG LP2270F- Manuals

Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Water supply 1) Cold water Maximum load Cotton 7 kg Spin speed Maximum 1200 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 4. PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispens...

4.1 Accessories 1 2 3 4 1 Spanner To remove the transit bolts. 2 Plastic caps To close the holes on the rear sideof the cabinet after the removal ofthe transit bolts. 3 Anti-flood inlet hose To prevent possible leakage 4 Plastic hose guide To connect the drain hose on theedge of a sink. 5. CONTROL P...

– Set again the washing programme and all possible options. • After 5 minutes from the end of the washing programme. Refer to 'At theend of programme'. 5.2 Programme knob 2 Turn this knob to set a programme. Therelated programme indicator comes on. 5.3 Display 3 A B C D The display shows: A • The ma...

Spin phase is off. 'Rinse Hold' function ison. 5.10 Temperature button 10 Press button 10 to change the default temperature. - - = cold water 5.11 Acoustic signals function You can hear the acoustic signals when:• You activate the appliance.• You deactivate the appliance.• You press the buttons.• Th...

ProgrammeTemperature Type of loadmax. weight ofload Cycledescription Functions SpülenRinçage Rinse Hand washed items. One rinse with ad- ditiveLong spin SPIN REDUCTIONRINSE HOLDEXTRA RINSE 5) GardinenRideaux Curtains40° - Cold Set this programmeto wash curtains. Itadds automaticallythe prewash phase...

4) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. To select the DRAIN programme only, set thefunction NO SPIN. 5) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs delicate rinses and a...

Programmes Load (Kg) Energy consump- tion (kWh) Water con- sumption (litre) Approxi- mate pro- gramme duration (minutes) Remain- ing mois- ture (%) 1) Standard 40°C cotton 3.5 0.46 39 150 53 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0.48 0.48 The information given in the charts abov...

Make sure that no laundry stays betweenthe seal and the door. There is a risk ofwater leakage or damage to the laundry. 9.2 Using the detergent and additives The detergent compartment for the prewash phase and thesoak programme.Add the detergent for prewash and soak before the start of theprogramme....

Check the position of the flap 1. Pull out the detergent dispenser un-til it stops. 2. Press the lever down to remove thedispenser. 3. To use powder detergent, turn theflap up. 4. To use liquid detergent, turn theflap down. With the flap in the positionDOWN: – Do not use gelatinous or thick liquid d...

5. Press button 4 to start the pro- gramme. The indicator of button 4 is on. The drain pump can operate fora short time when the appliancefills water. The appliance adjust auto-matically the cycle time to thelaundry you have put in thedrum to have perfect washingresults in the minimum neces-sary tim...

• Press button 1 to deactivate the ap- pliance. After five minutes from theend of the programme, the energysaving function automatically deacti-vates the appliance. When you activate the applianceagain, the display show the endof the last set programme. Turnthe programme knob to set anew cycle. • Re...

• To help the environment, do not use more than the correct quantity of de-tergent. • Obey the instructions that you find on the on packaging of these products. • Use the correct products for the type and colour of the fabric, the pro-gramme temperature and the level ofsoil. • If you use liquid dete...

• Use a correct quantity of powder de- tergent with biological properties. After each wash, keep the door open fora while to prevent mould and to let un-pleasant smells go out. 11.4 Door seal Regularly examine the seal and removeall objects from the inner part. 11.5 Drum Regularly examine the drum t...

5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the recess. 11.7 Drain pump Regularly examine the drainpump and make sure that it isclean. Clean the pump if:• The appliance does not drain the wa- ter. • The drum cannot turn.• The appliance makes an unusual noise because of th...

To clean the water inlet filters: 1. Close the water tap. 2. Remove the water inlet hose fromthe water tap. 3. Clean the filter in the inlet hose witha stiff brush. 4. Remove the inlet hose behind theappliance. 5. Clean the filter in the valve with astiff brush or a towel. 45° 20° 6. Install again t...

12. TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.First try to find a solution to the problem(refer to the table). If not, contact theservice centre. With some problems, the acousticsignals operate and the display showsan alarm code: • - The appliance does n...

Problem Possible cause Possible solution The appliance fillswith water anddrain immediately. The end of the drainhose is too low. Make sure that the drain hose isin the correct position. The washing re-sults are not satis-factory. The detergent you usedwas not sufficient or cor-rect. Increase the de...

• Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaksfrom the couplings. Do not use an extension hose ifthe inlet hose is too short. Con-tact the service centre for the re-placement of the inlet hose. Water-stop device A The inlet hose has a...

• On the edge of a sink.• Make sure that the plastic guide can- not move when the appliance drains.Attach the guide to the water tap orthe wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into adrain pipe at a height of not less than60 cm and not more than 100 cm. Theend o...

14. ENVIRONMENT CONCERNS Recycle the materials with thesymbol . Put the packaging inapplicable containers to recycle it.Help protect the environment andhuman health and to recycle wasteof electrical and electronic appliances. Do not disposeappliances marked with the symbol with the household waste. ...