AEG LB3661- Manuals

Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Water supply 1) Cold water Maximum load Cotton 8 kg Spin speed Maximum 1400 rpm (LB 3461)1600 rpm (LB 3661) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 4. PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1...

4.1 Accessories 1 2 3 4 1 Spanner To remove the transit bolts. 2 Plastic caps To close the holes on the rear sideof the cabinet after the removal ofthe transit bolts. 3 Anti-flood inlet hose To prevent possible leakage 4 Plastic hose guide To connect the drain hose on theedge of a sink. 4.2 Child sa...

9 Spin reduction button ( U./Min. — T/ min. ) 10 Temperature button ( Temp. ) 5.1 On Off button 1 Press this button to activate or deacti-vate the appliance. A tune sounds whenthe appliance is activated.The AUTO Stand-by function automati-cally deactivates the appliance to de-crease the energy consu...

Spin phase is off. 'Rinse Hold' function ison. 5.10 Temperature button 10 Press button 10 to change the default temperature. - - = cold water 5.11 Acoustic signals function You can hear the acoustic signals when:• You activate the appliance.• You deactivate the appliance.• You press the buttons.• Th...

ProgrammeTemperature Type of loadmax. weight ofload Cycle description Functions SpülenRinçage RinseCold Hand washingitems. RinsesLong spin SPIN REDUC-TIONRINSE HOLDEXTRA RINSE 5) Jeans 60° - Cold All items in jeans.Jersey made itemswith hi-tech materi-als.max. 8 kg WashRinsesShort spin SPIN REDUC-TI...

STEAM PROGRAMMES Programme 1) Type of load Max. load Steam Auffrischen — Rafraî-chir This cycle removes odoursfrom the laundry. Steam does not re-move animal odours. Cotton and synthetic items. up to 1.5 Kg Steam Glätten — Défrois-sage This programme helps to dew-rinkle the laundry. Cotton and synth...

Programmes Load (kg) Energy consump- tion (kWh) Water con- sump- tion (li- tre) Approxi- mate pro- gramme duration (mi- nutes) Remain- ing mois- ture (%) 1) LB 3461 Remain- ing mois- ture (%) 1) LB 3661 Cottons 60 °C 8 1.60 72 168 52 43 Cottons 40 °C 8 1.00 72 164 52 43 Synthetics 40°C 4 0.60 50 110...

3. Press button 1 to activate the ap- pliance. 4. Put the laundry in the appliance. 5. Use the correct quantity of deter-gent and additives. 6. Set and start the correct programmefor the type of laundry and soil. 9.1 Loading the laundry 1. Open the appliance door. 2. Put the laundry in the drum, one...

The compartment for the stain remover.Put the product in the compartment and set the stain functionbefore you start the programme. Flap for powder or liquid detergentTurn it (up or down) in the correct position to use powder or liq-uid detergent. Always obey the instructions that you find on the pac...

If the temperature and level ofthe water in the drum are toohigh, the door lock symbol stayson and you cannot open thedoor. To open the door do thesteps that follow: 1. Deactivate the appliance. 2. Wait for some minutes. 3. Make sure that no water is inthe drum. If you deactivate the appliance, itis...

– Underwired bras.– Use a washing bag to wash small items. • A very small load can cause balance problems with the spin phase. If thisoccurs, adjust manually the items inthe tub and start the spin phase again. 10.2 Stubborn stains For some stains, water and detergent isnot sufficient.We recommend th...

find on the packaging of the manufactur-er.Do this separately from the laundrywash. 11.2 External cleaning Clean the appliance only with soap andwarm water. Fully dry all the surfaces. CAUTION! Do not use alcohol, solvents orchemical products. 11.3 Maintenance wash With the low temperature programme...

3. Remove the top part of the liquidadditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the recess. 11.7 Drain pump Regularly examine the drainpump and make sure that it isclean. Clean the pump if:• The appliance does not d...

To clean the water inlet filters: 1. Close the water tap. 2. Remove the water inlet hose fromthe water tap. 3. Clean the filter in the inlet hose witha stiff brush. 4. Remove the inlet hose behind theappliance. 5. Clean the filter in the valve with astiff brush or a towel. 45° 20° 6. Install again t...

12. TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.First try to find a solution to the problem(refer to the table). If not, contact theservice centre. With some problems, the acousticsignals operate and the display showsan alarm code: • - The appliance does n...

Problem Possible cause Possible solution The appliance fillswith water anddrain immediately. The end of the drainhose is too low. Make sure that the drain hose isin the correct position. The washing re-sults are not satis-factory. The detergent you usedwas not sufficient or cor-rect. Increase the de...

• Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaksfrom the couplings. Do not use an extension hose ifthe inlet hose is too short. Con-tact the service centre for the re-placement of the inlet hose. Water-stop device A The inlet hose has a...

• On the edge of a sink.• Make sure that the plastic guide can- not move when the appliance drains.Attach the guide to the water tap orthe wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into adrain pipe at a height of not less than60 cm and not more than 100 cm. Theend o...

14. ENVIRONMENT CONCERNS Recycle the materials with thesymbol . Put the packaging inapplicable containers to recycle it.Help protect the environment andhuman health and to recycle wasteof electrical and electronic appliances. Do not disposeappliances marked with the symbol with the household waste. ...