AEG L98480FL- Manuals

4. CONTROL PANEL 4.1 Jeans Cottons Eco Wool/Silk 1 2 3 4 5 6 7 8 9 10 11 12 1 Auto Off button (Auto Off) 2 Programme knob 3 Display 4 Steam touch button (Steam) 5 Memory touch buttons (Memory) 6 Start/Pause touch button (Start/ Pause) 7 Delay Start touch button (Delay Start ) 8 Time Save touch butto...

I Stain indicator Prewash indicator Soak indicator The indicator bar fills accordingly to the set functions. J Spin speed of the set programme No Spin indicator 1) Rinse Hold indicator 1) Only available for SPIN/DRAIN programme. K Default temperature of the set programme Cold water 5. PROGRAMMES 5.1...

Programme options compatibility Programme Spin Stains/ Pre- wash 1) Soak Extra Rinse 2) Time Save 3) Delay Start Cottons ■ ■ ■ ■ ■ ■ ■ Extra Silent ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ ■ Easy Iron ■ ■ ■ 4) ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ ■ ■ Wool/Silk ■ ■ ■ Duvet ■ ■ Anti-Allergy ■ ■ ■ ■ ■ ■ ■ Spin/Drain ...

6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient tempera- ture. At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme...

7. OPTIONS 7.1 Programme knob Turn this knob to set a programme. The related programme indicator comes on. 7.2 Steam Touch this button to set the steam level. This is possible only with programmes where the steam function is available. The duration of the steam phase changes accordingly to your sele...

• Deactivate the spin phase ( 'No spin' function). • Activate the Rinse Hold function. Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed. 7.10 Temp. Touch this button to change the default temperature. Symbols and = cold water 8. SETT...

9.2 Change the language after the first activation 1. Touch button Spin and button Stains/Prewash at the same time for some seconds. 2. When the display shows the language set, turn the programme knob to set the new language. 3. Touch Start/Pause button to confirm the selection. 9.3 Clock setting Af...

1 2 3. To use powder detergent, turn the flap up. A 4. To use liquid detergent, turn the flap down. B With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit showed in the flap. • Do not set the prewash phase. • Do not...

When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. 2. Remove the laundry from the appliance. 3. Make sure that the drum is empty. 4. Keep the door and air filter ajar, to prevent mildew and odours. 10.15 Draining wat...

11.2 Stubborn stains For some stains, water and detergent is not sufficient.We recommend that you remove these stains before you put the items in the appliance.Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. 11.3 Detergents and ...

12.10 Frost precautions If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a cont...

Problem Possible solution The drum is empty and thedisplay shows there is someweight in. Press button Auto Off to deactivate the appliance and ac-tivate it again to set a tare. The drum is full but the dis-play shows kg . You loaded the laundry before activating the appliance.Press button Auto Off t...