Page 2 - CUSTOMER CARE AND SERVICE
CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. CONDITIONS OF USE....................................................................................................4 3. SAFETY INSTRUCTIONS..............................
Page 4 - Installation
• The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. • Before mainte...
Page 5 - PRODUCT DESCRIPTION; Appliance overview
• Do not touch the mains cable or the mains plug with wet hands. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. 3.3 Water connection • Make sure not to cause damage to the water hoses. • Before you connect the appliance to new pipes or pipes not used for a lon...
Page 6 - CONTROL PANEL; Control panel description
3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Levelling feet 8 Water drain hose 9 Water inlet valve 10 Mains cable 11 Transit bolts 12 Levelling feet 4.2 How to activate the child safety device This device prevents children or pets to be closed in the drum.Turn the device clockwise, un...
Page 7 - Display
8 Stains/Prewash button (Stains/ Prewash) 9 Spin reduction button (Spin) 10 Temperature button (Temp.) 5.2 Display A H K J C D E F G B M L I The display shows: A Temperature of the set programme Cold water B Spin speed of the set programme No Spin symbol 1) Rinse hold symbol 1) Only available for SP...
Page 10 - PROGRAMMES; Programme Chart
M the Stain symbol comes on when you activate the function. The Prewash symbol comes on when this function is activated. The indicator bar is not fully filled when you set only one of the func-tions. The indicator bar is fully filled when you set the two functions. 6. PROGRAMMES 6.1 Programme Chart ...
Page 13 - Woolmark Apparel Care -; OPTIONS; Delay Start
Programme Spin Stains/Prewash 1) Extra Rinse 2) Time Save 3) Delay Start Rinse ■ ■ ■ ■ Outdoor ■ ■ ■ ■ ■ 20 Min. - 3 Kg ■ ■ Super Eco 30° ■ ■ ■ ■ Economy ■ ■ ■ ■ ■ 6) ■ 1) If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a temperature lower then 40...
Page 14 - SETTINGS; Acoustic signals
The display shows the related indicator and delay time. 7.3 Time Save With this option you can decrease the programme duration.• Press this button one time to set 'Shortened duration' for items with daily soil. • Press this button two times to set 'Extra Quick' for items with almost no soil. Some pr...
Page 15 - BEFORE FIRST USE
time until the indicator comes on/ goes off . You can activate this option:• After you press Start/Pause : the options and the programme knob are locked. • Before you press Start/Pause : the appliance cannot start. 8.3 Permanent Extra Rinse With this option you can permanently have an extra rinse wh...
Page 17 - Starting the programme
1 2 3. To use powder detergent, turn the flap up. A 4. To use liquid detergent, turn the flap down. B With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit showed in the flap. • Do not set the prewash phase. • Do not...
Page 19 - HINTS AND TIPS
10.15 Draining water out after end of cycle The washing programme is completed, but there is water in the drum : The drum turns regularly to prevent the creases in the laundry. The door lock indicator is on. The door stays locked.You must drain the water to open the door: 1. If necessary, decrease t...
Page 20 - CARE AND CLEANING; External cleaning
– powder detergents for delicate fabrics (40 °C max) and woollens, – liquid detergents, preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special for woollens only. • Do not mix different types of detergents. • To help the environment, do not use more than the co...
Page 24 - Frost precautions; TROUBLESHOOTING; Introduction; Possible failures
12.10 Frost precautions If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a cont...
Page 27 - Emergency door opening; TECHNICAL DATA
13.3 Emergency door opening In case of power failure or appliance failure the appliance door remains locked. The washing programme continues, when the power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock feature.Before opening the doo...
Page 28 - WARRANTY
Spin Speed Maximum 1400 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 15. WARRANTY FOR SALES IN AUSTRALIA AND NEW ZEALANDALL AEG BRANDED APPLIANCES This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Ple...
Page 30 - ENVIRONMENT CONCERNS
you to enable AEG to meet its obligations under this warranty. Important Notice Before calling for service, please ensure that the steps listed in point 13 above have beenfollowed. SERVICE AUSTRALIA www.aeg.com/au FOR SERVICE or to find the address of your nearest state service centre in Australia P...