AEG L75479FL- Manuals

AEG L75479FL– User Manual in PDF format online.

Manuals:

User Manual

User Manual AEG L75479FL

Summary

Page 2 - Visit our website for:; Register your product for better service:; CUSTOMER CARE AND SERVICE; General information and tips

CONTENTS 1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. TECHNICAL INFORMATION ....

Page 4 - SAFETY INSTRUCTIONS; Installation

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard. • The operating water pressure (minimum and maxi- mum) must be between 0,5 bar (0,05 MPa) and 8 bar(0,8 MPa) • The ventilation openings in the base ...

Page 5 - TECHNICAL INFORMATION

Water connection • Make sure not to cause damage to the water hoses. • The appliance is to be connected to the water mains using the new sup-plied hose-sets. Old hose sets mustnot be reused. • Before you connect the appliance to new pipes or pipes not used for a longtime, let the water flow until it...

Page 6 - PRODUCT DESCRIPTION; Child safety device

Spin speed Maximum 1400 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 4. PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water inlet ...

Page 7 - Accessories; Spanner; CONTROL PANEL; On Off button

4.2 Accessories 1 2 3 4 1 Spanner To remove the transit bolts. 2 Plastic caps To close the holes on the rear sideof the cabinet after the removal ofthe transit bolts. 3 Anti-flood inlet hose To prevent possible leakage 4 Plastic hose guide To connect the drain hose on theedge of a sink. 5. CONTROL P...

Page 8 - • After 5 minutes from the end of the; Programme knob; If the programme is completed but the symbol stays on:

• After 5 minutes from the end of the washing programme. Refer to 'At theend of programme'. 5.2 Programme knob 2 Turn this knob to set a programme. Therelated programme indicator comes on. 5.3 Display 3 A B C D The display shows: A • The maximum temperature of the programme. B • The default spin spe...

Page 10 - WASHING PROGRAMMES; Functions

Spin phase is off. 'Rinse Hold' function ison. 5.10 Temperature button 10 Press button 10 to change the default temperature. - - = cold water 5.11 Acoustic signals function You can hear the acoustic signals when:• You activate the appliance.• You deactivate the appliance.• You press the buttons.• Th...

Page 11 - FLECKEN

ProgrammeTemperature Type of loadmax. weight ofload Cycledescription Functions Extra Leise95° - Cold White and colouredcotton with normalsoil.max. 7 kg Stop with water inthe drumRinsesLong spin FLECKEN 1) EXTRA SPÜLENZEIT SPAREN 2) Pflegeleicht60° - Cold Synthetic or mixedfabric items withnormal lev...

Page 12 - SPIN REDUCTION

ProgrammeTemperature Type of loadmax. weight ofload Cycledescription Functions Gardinen40° - Cold Set this programmeto wash curtains. Itadds automaticallythe prewash phaseto clean the dustfrom the curtains.Do not put the de-tergent into the pre-wash compartment.max. 2 kg PrewashWashRinsesShort spin ...

Page 13 - CONSUMPTION VALUES

7) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are respectively the “standard 60° C cottonprogramme” and the “standard 40° C cotton programme”. They are the most efficientprogrammes in terms of combined energy and water consumption...

Page 14 - Press button; Loading the laundry; Open the appliance door.

Off Mode (W) Left On Mode (W) 0.48 0.48 The information given in the charts above are in compliance with the EU Com-mision regulation 2015/2010 implementing directive 2009/125/EC. 8. BEFORE FIRST USE 1. To activate the drain system, put 2 li-tre of water in the main wash com-partment of the detergen...

Page 15 - Filling the detergent and additives; This is the maximum level for the quantity of liquid additives.; Check the position of the flap

9.2 Filling the detergent and additives The detergent compartment for the prewash phase and thesoak programme.Add the detergent for prewash and soak before the start of theprogramme. The detergent compartment for the washing phase.If you use a liquid detergent, put it immediately before you startthe...

Page 17 - Set the delay start; Steam; Cancel the delay start; To open the appliance door:; At the end of the

1. Press button 4 . The indicator flashes. 2. Change the function set. 9.7 Set the delay start 1. Press button 5 again and again un- til the display shows the number ofminutes or hours. The related sym-bols comes on. 2. Press button 4 , the appliance starts the countdown of the delaystart.When the c...

Page 18 - HELPFUL HINTS AND TIPS; The laundry load

10. HELPFUL HINTS AND TIPS 10.1 The laundry load • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. ...

Page 19 - CARE AND CLEANING; Descaling; gramme; Door seal; • Start a short programme for cotton at

Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 11. CARE AND CLEANING WARNING! Disconnect the appliance from the mainssupply before you clean...

Page 20 - Detergent dispenser; To clean the dispenser:; Pull the dispenser out.; Drain pump; • The display shows an alarm code be-

11.6 Detergent dispenser To clean the dispenser: 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquidadditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the recess. 11.7 Drain pump Regular...

Page 21 - To clean the drain pump:; Open the drain pump door.

To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess ofthe drain pump to collect the waterthat flows out. 4. Press the two levers and pull for-ward the drainage duct to let thewater flow out. 1 2 5. When the container is full of...

Page 22 - • The indicator of button; To clean the water inlet filters:; Emergency drain

1 2 9. Clean the filter under the water tapand put it back in the pump into thespecial guides. 10. Make sure that you tighten correctlythe filter to prevent leakages. 11. Put the flap back and close the drainpump door. 11.8 The inlet hose filter and the valve filter It could be necessary to clean th...

Page 23 - Frost precautions; Remove the water inlet hose; TROUBLESHOOTING; - The appliance does not fill with; Problem; The water tap is closed.

Put the drainage duct back and close thedrain pump flap.When you drain the water with the emer-gency drain procedure, you must acti-vate again the drain system: 1. Put 2 litres of water in the main washcompartment of the detergent dis-penser. 2. Start the programme to drain thewater. 11.10 Frost pre...

Page 25 - The load is very small.; Service; • Refer to the information supplied with

Problem Possible cause Possible solution Leakages from the drainpump. Make sure that the drain pumpfilter is tight. The water drain hose isdamaged. Make sure that the water inlethose has no damages. You cannot openthe appliancedoor. The washing pro-gramme is in operation. Let the washing programmeen...

Page 26 - INSTALLATION; Fixing plate kit; Available from your authorized dealer.; Unpacking; Remove the cardboard top.

We recommend that you write theinformation here: Model(MOD.) .................. Product number(PNC) .................. Serial number(S.N.) .................. 13. INSTALLATION 13.1 Fixing plate kit (405517114) Available from your authorized dealer. If you install the appliance on a plinth,secure the ...

Page 28 - Positioning and levelling

10. Remove the three bolts. Use the keysupplied with the appliance. 11. Pull out the plastic spacers. 12. Put the plastic caps in the holes.You can find these caps in the usermanual bag. WARNING! Remove all the packaging andthe transit bolts before you installthe appliance. We recommend that you kee...

Page 29 - • The appliance must be level and sta-; The inlet hose; • Connect the hose to the appliance.

• The appliance must be level and sta- ble. CAUTION! Do not put cardboard, wood orequivalent materials below theappliance feet to adjust the level. 13.4 The inlet hose 20 O 20 O 20 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set ...

Page 30 - Water drainage; With the plastic hose guide.

Water-stop device A The inlet hose has a water stop device.This device prevents water leaks in thehose because of its natural ageing. Thered sector in the window «A» shows thisfault .If this occur, close the water tap andcontact the service centre to replace thehose. 13.5 Water drainage There are di...

Page 31 - Without the plastic hose guide.; • Directly to a built-in drain pipe in the; ENVIRONMENT CONCERNS

Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drainhose in the spigot and tighten it with aclip. Make sure that the drain hosemakes a loop to prevent that remain-ing particles go in the appliance fromthe sink. • Directly to a built-in drain pipe in the room w...