AEG L62280FL- Manuals

Page 2 - Visit our website for:; CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. PRODUCT DESCRIPTION . ....

Page 4 - SAFETY INSTRUCTIONS; Installation

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard. • The operating water pressure (minimum and maxi- mum) must be between 0,5 bar (0,05 MPa) and 8 bar(0,8 MPa) • The ventilation openings in the base ...

Page 6 - PRODUCT DESCRIPTION; Fixing plate kit; CONTROL PANEL; Inicio Diferido

3. PRODUCT DESCRIPTION 1 2 3 5 6 7 4 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump filter 7 Feet for the appliance level 3.1 Fixing plate kit (4055171146) Use this special accessory, when you in-stall the appliance on a plinth.It prevents the movements of ...

Page 7 - Display; PROGRAMMES; Centrifugado

4.1 Display A B C A) The time area:• : the programme duration • : the delay start • : the alarm codes • : the message of error • : Programme is completed. B) The door lock indicator:• You cannot open the appliance door when the indicator is on. • You cannot open the appliance door when the indicator...

Page 8 - Programme options compatibility

ProgrammeTemperature range Type of load and soilMaximum load, Maximum spin AclaradoCold To rinse and spin the laundry. All fabrics.8 kg, 1000 rpm (L62080FL), 1200 rpm (L62280FL) Mix 20° 1) 20 °C Special programme for cotton, synthetic andmixed fabrics with light soil.Set this programme to decrease t...

Page 9 - Algodón Eco; CONSUMPTION VALUES

Programme Centrif. Aclarado Extra Ahorra Tiempo Inicio Di- ferido Algodón Eco ■ ■ ■ ■ ■ 6. CONSUMPTION VALUES At programme start the display shows the duration programme for the max-imum load capacity.During the washing phase the programme duration is automatically calcula-ted and can greatly be red...

Page 10 - OPTIONS; Additional spin options:; Rinse Hold; Extra Rinse (Aclarado

1) At the end of spin phase. 2) For model L62080FL . 3) For model L62280FL. 7. OPTIONS 7.1 Temperature (Temp.) Set this option to change the defaulttemperature.Indicator = cold water. The indicator of the set temperaturecomes on. 7.2 Spin (Centrif.) With this option you can change the de-fault spin ...

Page 11 - Loading the laundry; Using detergent and additives

• You deactivate the appliance.• You press the buttons.• The programme is completed.• The appliance has a malfunction.To deactivate/activate the acoustic sig- nals, press Temp. and Centrif. at thesame time for 6 seconds. If you deactivate the acoustic sig-nals, they continue operate whenthe applianc...

Page 12 - Liquid or powder detergent; When you use the liquid detergent:; Activating the appliance

Detergent compartment for prewash phase. Detergent compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Flap for powder or liquid detergent. Liquid or powder detergent 1. 2. A 3. B 4. • Position A for powder detergent (factory setting). • Position B for liqui...

Page 14 - HELPFUL HINTS AND TIPS; The laundry load

9.10 At the end of the programme • The appliance stops automatically.• The acoustic signal operates (if it is ac- tivated). • In the display a comes on.• The indicator Inicio/Pausa goes off.• The door lock indicator goes off. • Remove the laundry from the appli- ance. Make sure that the drum is emp-...

Page 15 - CARE AND CLEANING

– Use a washing bag to wash small items. • A very small load can cause balance problems with the spin phase. If thisoccurs, adjust manually the items inthe tub and start the spin phase again. 10.2 Stubborn stains For some stains, water and detergent isnot sufficient.We recommend that you remove thes...

Page 19 - TROUBLESHOOTING; Problem

1. Disconnect the mains plug from themains socket. 2. Close the water tap. 3. Remove the water inlet hose. 4. Put the two ends of the inlet hose ina container and let the water flowout of the hose. 5. Empty the drain pump. Refer to theemergency drain procedure. 6. When the drain pump is empty, in-st...

Page 20 - Make sure that the sink spigot is not clogged.

Problem Possible solution Make sure that the connection of the water inlet hoseis correct. The appliance doesnot drain the water. Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean thefilter, if ne...

Page 21 - TECHNICAL DATA; ENVIRONMENT CONCERNS

Problem Possible solution Use special products to remove the stubborn stains be-fore you wash the laundry. Make sure that you set the correct temperature. Decrease the laundry load. After the check, activate the appliance.The programme continues from thepoint of interruption.If the problem occurs ag...