AEG L61271BI- Manuals

• Do not install and connect a damaged appliance. • Make sure to remove all packaging and transport bolts. • Make sure that the mains plug is dis- connected from the mains socket dur-ing installation. • Only a qualified person must do the electrical installation, the plumbing andthe installation of ...

PRODUCT DESCRIPTION 7 8 9 10 1 2 3 4 5 6 1 Detergent dispenser 2 Control panel 3 Door handle 4 Rating plate 5 Drain pump 6 Feet for the appliance level 7 Water drain hose 8 Mains cable 9 Water inlet hose 10 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner To remove the transit bolts. 2 Pla...

CONTROL PANEL 1 2 3 4 5 6 7 9 8 10 A BC 1 Programme selector dial 2 TEMPERATURE button 3 SPIN button• Rinse hold position 4 STAIN button 5 EXTRA RINSE button 6 TIME SAVE button 7 Display 8 START/PAUSE button 9 DELAY START button 10 Indicator pilot lights:• A – Washing phase• B – Door locked• C – Ext...

End of programme When the programme has finished, the display shows a blinkingzero .The DOOR light B , the WASHING light A and the light of button 8 go out.The door can be opened. Incorrect option selection If you set an option which is not compatible with the wash pro-gramme, the display shows the ...

WASHING PROGRAMMES ProgrammeMaximum and Minimum TemperatureType of LaundryMaximum Load Cycle De-scription Options Cottons 95° - ColdMax. load 7 kg - Reduced load 3 kg White and coloured cotton (normally soiled items). Main washRinsesLong spin SPIN REDUCTIONRINSE HOLDSTAIN 1) TIME SAVE 2) EXTRA RINSE...

ProgrammeMaximum and Minimum TemperatureType of LaundryMaximum Load Cycle De-scription Options Economy 40°Max. load 7 kg Fast coloured cotton . Slightly soiled cotton items.The appliance decreases the temperatureand extends the washing time to obtain agood washing efficiency so saving energy. Main w...

FIRST USE 1. To activate the drain system, put 2 li-tre of water in the main wash com-partment of the detergent dispenser. 2. Put a small quantity of detergent inthe main wash compartment of the detergent dispenser. Set and start aprogramme for cotton at the highesttemperature without laundry. This ...

This is the maximum level for the quantity of liquid additives. Always obey the instructions that you find on the packaging of the deter-gent products. SETTING AND STARTING A PROGRAMME SETTING THE PROGRAMME(KNOB 1 ) Turn the programme selector dial to therequired programme.The programme dial determi...

The appliance will perform some addi-tional rinses. SETTING PERMANENTLY THEEXTRA RINSE OPTION If you wish to activate this option perma-nently press simultaneously buttons 2 and 3 for some seconds: the light C is on. If you wish to cancel it press the same but-tons until the symbol disappears. SETTI...

ALTERING AN OPTION OR ARUNNING PROGRAMME It is possible to change some options be-fore the programme carries it out. Beforeyou make any change, you must press thebutton 8 to pause the appliance. Changing a running programme is possi-ble only by resetting it . Turn the programme dial to and then to t...

HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We recomm...

Level Type Water hardness °dH °T.H. mmol/l Clarke 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 ENGLISH 19

CARE AND CLEANING WARNING! Disconnect the appliance from the mainssupply before you clean it. DESCALING The water we use contains limescale. If itbecomes necessary, use a water softenerto remove limescales.Use a special product made for washingmachines. Obey the instructions that you find on the pac...

MAX 3. Remove the top part of the liquid ad-ditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the recess. DRAIN PUMP The pump should be inspected regularlyand particularly if:• the appliance does not empty and/or spin; • th...

To clean the water inlet filters: 1. Close the water tap. 2. Remove the water inlet hose from thewater tap. 3. Clean the filter in the inlet hose with astiff brush. 4. Remove the inlet hose behind theappliance. 5. Clean the filter in the valve with a stiffbrush or a towel. 45° 20° 6. Install again t...

TROUBLESHOOTING Certain problems are due to lack of sim-ple maintenance or oversights, which canbe solved easily without calling out an en-gineer. Before contacting your local Serv-ice Centre, please carry out the checks lis-ted below.During machine operation it is possiblethat the yellow pilot ligh...

Problem Possible cause/Solution The machine does notempty and/or does notspin: The drain hose is squashed or kinked. • Check the drain hose connection.The drain filter is clogged. • Clean the drain filter.You have set an option or a programme that ends withthe water still in the tub or a that elimin...

Problem Possible cause/Solution The machine vibrates oris noisy: The transit bolts and packing have not been removed.• Check the correct installation of the appliance.The support feet have not been adjusted• Check the correct levelling of the appliance.The laundry is not evenly distributed in the dr...

INSTALLATION UNPACKING 1. Use the gloves. Remove the externalfilm. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packagingmaterials. 4. Remove the internal film. 5. Open the door. Remove the polystyr-ene piece from the door seal and allthe items from the drum. EN...

6. Put one of the polystyrene packagingelements on the floor behind the ap-pliance. Carefully put down the appli-ance with the rear side on it. Makesure not to damage the hoses. 1 2 7. Remove the polystyrene protectionfrom the bottom. 8. Pull up the appliance in vertical posi-tion. 9. Remove the pow...

12. Put the plastic caps in the holes. Youcan find these caps in the user man-ual bag. WARNING! Remove all the packaging and thetransit bolts before you install theappliance. We recommend that you keep thepackaging and the transit bolts forwhen you move the appliance. POSITIONING AND LEVELLING • Ins...

THE INLET HOSE 20 O 20 O 20 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaksfrom the cou...

With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide cannot move when the appliance drains. At-tach the guide to the water tap or thewall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into adrain pipe at a height of not less than60 cm (23.6...

Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drainhose in the spigot and tighten it with aclip. Make sure that the drain hosemakes a loop to prevent that remainingparticles go in the appliance from thesink. • Directly to a built-in drain pipe in the room wal...

BUILDING IN OVERVIEW 600 mm 555 mm 596 mm 170 mm 75 mm 100 mm 60 mm min. 820 mm min. 560 mm 818 mm • This appliance has been designed to be built into the kitchen furniture. Therecess should have the dimensionsshown in Fig 1 . Fig.1 Preparation and assembly of the door • The machine is originally pr...