AEG L 75670 FL- Manuals

Level of protection against ingress of solid particlesand moisture ensured by the protective cover, ex-cept where the low voltage equipment has no pro-tection against moisture IPX4 Water supply pressure 1) Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Water supply 2) Cold water Maximum load Cot...

4.2 Accessories 1 2 3 4 1 Spanner To remove the transit bolts. 2 Plastic caps To close the holes on the rear sideof the cabinet after the removal ofthe transit bolts. 3 Anti-flood inlet hose To prevent possible leakage 4 Plastic hose guide To connect the drain hose on theedge of a sink. 4.3 Fixing p...

6.1 On Off button 1 Press this button to activate or deacti-vate the appliance. A tune sounds whenthe appliance is activated.The AUTO Stand-by function automati-cally deactivates the appliance to de-crease the energy consumption when:• You do not use the appliance for 5 mi- nutes before you press bu...

Spin phase is off. 'Rinse Hold' function ison. 6.10 Temperature button 10 Press button 10 to change the default temperature. - - = cold water 6.11 Acoustic signals function You can hear the acoustic signals when:• You activate the appliance.• You deactivate the appliance.• You press the buttons.• Th...

ProgrammeTemperature Type of loadmax. weight ofload Cycledescription Functions Extra Silent95° - Cold White and colouredcotton with normalsoil.max. 7 kg Stop with water inthe drumRinsesLong spin STAINEXTRA RINSETIME SAVE 1) Synthetics60° - Cold Synthetic or mixedfabric items withnormal level of soil...

ProgrammeTemperature Type of loadmax. weight ofload Cycledescription Functions Curtains40° - Cold Set this programmeto wash curtains. Itadds automaticallythe prewash phaseto clean the dustfrom the curtains.Do not put the de-tergent into the pre-wash compartment.max. 2 kg PrewashWashRinsesShort spin ...

programme» and the «standard 40° C cotton programme». They are the most efficientprogrammes in terms of combined energy and water consumptions for washing normallysoiled cotton laundry.Set this programme to have a good washing results and decrease the energyconsumption. The time of the washing progr...

Off Mode (W) Left-On Mode (W) 0.48 0.48 The information given in the charts above are in compliance with the EU Com- mission regulation 1015/2010 implementing directive 2009/125/EC. 8. BEFORE FIRST USE 1. To activate the drain system, put 2 li-tre of water in the main wash com-partment of the deterg...

The detergent compartment for the prewash phase and thesoak programme.Add the detergent for prewash and soak before the start of theprogramme. The detergent compartment for the washing phase.If you use a liquid detergent, put it immediately before you startthe programme. Liquid additives compartment...

2. Press button 1 again to activate the appliance. Now, you can set anew washing programme. The appliance does not drain thewater. 9.6 Change a function You can change only some functions be-fore they operate. 1. Press button 4 . The indicator flashes. 2. Change the function set. 9.7 Set the delay s...

When you activate the applianceagain, the display show the endof the last set programme. Turnthe programme knob to set anew cycle. • Remove the laundry from the appli- ance. Make sure that the drum is emp-ty. • Keep the door ajar, to prevent mildew and odours. • Close the water tap. The washing prog...

• If you use liquid detergents, do not set the prewash phase. • If your appliance has not the deter- gent dispenser with the flap device,add the liquid detergents with a dos-ing ball. 11.4 Water hardness If the water hardness in your area is highor moderate, we recommend that youuse a water softener...

12.4 Door seal Regularly examine the seal and removeall objects from the inner part. 12.5 Drum Regularly examine the drum to preventlimescale and rust particles.Only use special products to remove rustparticles from the drum.To do this: • Clean the drum with special product for stainless steel. • St...

12.7 Drain pump Regularly examine the drainpump and make sure that it isclean. Clean the pump if:• The appliance does not drain the wa- ter. • The drum cannot turn.• The appliance makes an unusual noise because of the blockage of the drainpump. • The display shows an alarm code be- cause of the prob...

7. Remove fluff and objects from thepump. 8. Make sure that the impeller of thepump can turn. If this does not oc-cur, contact the service centre. 1 2 9. Clean the filter under the water tapand put it back in the pump into thespecial guides. 10. Make sure that you tighten correctlythe filter to prev...

4. Remove the inlet hose behind theappliance. 5. Clean the filter in the valve with astiff brush or a towel. 45° 20° 6. Install again the inlet hose. Makesure that the couplings are tight toprevent leakages. 7. Open the water tap. 12.9 Emergency drain Because of a malfunction, the appliancecannot dr...

• - The appliance does not drain the water. • - The appliance door is open or not closed correctly. • - The anti-flood device is on. WARNING! Deactivate the appliance beforeyou do the checks. Problem Possible cause Possible solution The appliancedoes not fill withwater. The water tap is closed. Open...

Problem Possible cause Possible solution The filter of the drainpump is blocked. Clean the filter of the drainpump. Refer to 'Care and clean-ing'. Balance problems withthe laundry load. Adjust manually the items in thetub and start the spin phaseagain. The programmedoes not start. The mains plug is ...

Problem Possible cause Possible solution You did not remove thestubborn stains beforeyou wash the laundry. Use special products to removethe stubborn stains. Incorrect temperaturewas set. Make sure that you set the cor-rect temperature. Too much laundry load. Decrease the laundry load. After the che...

4. Remove the internal film. 5. Open the door. Remove the poly-styrene piece from the door sealand all the items from the drum. 6. Put one of the polystyrene packag-ing elements on the floor behindthe appliance. Carefully put downthe appliance with the rear side onit. Make sure not to damage the ho-...

9. Remove the power supply cable andthe drain hose from the hose hold-ers. 10. Remove the three bolts. Use the keysupplied with the appliance. 11. Pull out the plastic spacers. 12. Put the plastic caps in the holes.You can find these caps in the usermanual bag. WARNING! Remove all the packaging andt...

14.2 Positioning and levelling x4 • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance. • Make sure that the appliance does not touch the wall or other units • Loosen or tighten the feet to adjust the level. A correct adjustment o...

14.3 The inlet hose 20 O 20 O 20 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaksfrom th...

Water-stop device A The inlet hose has a water stop device.This device prevents water leaks in thehose because of its natural ageing. Thered sector in the window «A» shows thisfault .If this occur, close the water tap andcontact the service centre to replace thehose. 14.4 Water drainage There are di...

• If the end of the drain hose is this (see the drawing), you can push it directlyinto the stand pipe. Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drainhose in the spigot and tighten it with aclip. Make sure that the drain hosemakes a loop to prevent that r...

ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol . Put the packaging in applicable con-tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less waterand energy, obey these instructions:• Set a programme without the pre- wash phase to wash laundry with n...

TECHNICAL INFORMATION Dimensions Width / Height / Depth 605 / 850 / 605 mm Total depth 640 mm Electrical connection: VoltageOverall powerFuseFrequency 230-240 V 2200 W 10 A 50 Hz Level of protection against ingress of solid particlesand moisture ensured by the protective cover, exceptwhere the low v...

PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water inlet valve 10 Mains cable 11 Transit bolts 12 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner...

CONTROL PANEL Cottons+ PrewashExtra SilentSynthetics+ PrewashEasy IronDelicatesWool/Silk Economy 20 Min. - 3 kg Quick Intensive Jeans Curtains Super Eco Rinse Spin/Drain On/Off Temp. Spin Start/Pause Delay Start Time Save Stains Extra Rinse 1 2 3 4 5 6 7 8 9 10 1 On/Off button 2 Programme knob 3 Dis...

C • The display symbols. 2) Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on.You can open the door only when the symbol goes off. If the programme is completed but the symbol stays on: • There is water in the drum.• The 'Ri...

PROGRAMMES ProgrammeTemperature Type of loadmax. weight of load Cycledescription Functions Cottons95° - Cold White and colouredcotton with normalsoil.max. 7 kg WashRinsesLong spin SPIN REDUCTIONRINSE HOLDSTAINEXTRA RINSETIME SAVE 1) Cottons + pre-wash95° - Cold White and colouredcotton with heavysoi...

3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. 4) Set this function to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 5) Set this programme to decrease the time and the cons...

BEFORE FIRST USE 1. To activate the drain system, put 2litre of water in the main wash com-partment of the detergent dispens-er. 2. Put a small quantity of detergent inthe main wash compartment of the detergent dispenser. Set and starta programme for cotton at thehighest temperature without laun-dry...

FILLING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soakprogramme.Add the detergent for prewash and soak before the start of theprogramme. The detergent compartment for the washing phase.If you use a liquid detergent, put it immediately before you startthe pro...

3. To use powder detergent, turn theflap up. 4. To use liquid detergent, turn theflap down. With the flap in the positionDOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed inthe flap. – Do not set the prewash phase. – Do not set the d...

CHANGE A FUNCTION You can change only some functionsbefore they operate. 1. Press button 4 . The indicator flashes. 2. Change the function set. SET THE DELAY START 1. Press button 5 again and again until the display shows the numberof minutes or hours. The relatedsymbols comes on. 2. Press button 4 ...

HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, col- oured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We reco...

Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 ENGLISH 21

CARE AND CLEANING WARNING! Disconnect the appliance from themains supply before you clean it. DESCALING The water we use contains limescale. Ifit becomes necessary, use a water soft-ener to remove limescales.Use a special product made for wash-ing machines. Obey the instructionsthat you find on the ...

DETERGENT DISPENSER To clean the dispenser: 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquidadditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the re-cess. DRAIN PUMP Regularly examin...

To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess ofthe drain pump to collect the waterthat flows out. 4. Press the two levers and pull for-ward the drainage duct to let thewater flow out. 1 2 5. When the container is full of...

1 2 9. Clean the filter under the water tapand put it back in the pump intothe special guides. 10. Make sure that you tighten correct-ly the filter to prevent leakages. 11. Put the flap back and close thedrain pump door. THE INLET HOSE FILTER ANDTHE VALVE FILTER It could be necessary to clean the fi...

When you drain the water with theemergency drain procedure, you mustactivate again the drain system: 1. Put 2 litres of water in the mainwash compartment of the deter-gent dispenser. 2. Start the programme to drain thewater. FROST PRECAUTIONS If the appliance is installed in an areawhere the tempera...

TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.First try to find a solution to the prob-lem (refer to the table). If not, contactthe service centre. With some problems, the acousticsignals operate and the displayshows an alarm code: • - The appliance does not...

INSTALLATION UNPACKING 1. Use the gloves. Remove the exter-nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packagingmaterials. 4. Remove the internal film. 5. Open the door. Remove the poly-styrene piece from the door sealand all the items from the drum. ...

6. Put the front piece on the floor be-hind the appliance. Carefully putdown the appliance with the rearside on it. Make sure not to dam-age the hoses. 1 2 7. Remove the polystyrene protectionfrom the bottom. 8. Pull up the appliance in vertical po-sition. 9. Remove the power supply cableand the dra...

12. Replace the plastic spacers withthe plastic caps. You can find thesecaps in the user manual bag. WARNING! Remove all the packaging andthe transit bolts before you in-stall the appliance. We recommend that you keepthe packaging and the transitbolts for when you move the ap-pliance. POSITIONING AN...

Installation on a not hard floor When you install the appliance on a nothard floor (wooden planks floor), put arigid support plinth under the appli-ance feet to prevent the noise and thevibration.Assemble the plinth with a waterproofwood panel (min. 15 mm thick) and at- tach it to the beams of the f...

Water-stop device A The inlet hose has a water stop device.This device prevents water leaks in thehose because of its natural ageing. Thered sector in the window «A» shows thisfault .If this occur, close the water tap andcontact the service centre to replacethe hose. WATER DRAINAGE There are differe...

• If the end of the drain hose is this (see the drawing), you can push it di-rectly into the stand pipe. Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drainhose in the spigot and tighten it witha clip. Make sure that the drain hosemakes a loop to prevent that...