AEG L 75280 FLP- Manuals

Page 2 - General information and tips

CONTENTS 4 SAFETY INFORMATION5 TECHNICAL INFORMATION7 PRODUCT DESCRIPTION8 CONTROL PANEL 11 PROGRAMMES14 BEFORE FIRST USE14 USING THE APPLIANCE14 LOADING THE LAUNDRY14 FILLING THE DETERGENT AND ADDITIVES16 SETTING AND STARTING A PROGRAMME17 AT THE END OF THE PROGRAMME18 HINTS AND TIPS20 CARE AND CLE...

Page 3 - We recommend the use of original spare parts.

FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative technologies that helpmake life simpler – features you might not find on ordinary appliances. Please spenda few minutes reading to get the very best from ...

Page 4 - SAFETY INFORMATION; CHILD SAFETY DEVICE

SAFETY INFORMATION Before the installation and use, read thismanual carefully:• For your safety and the safety of your property • To help the environment• For the correct operation of the appli- ance. Always keep these instructions with theappliance also if you move or give it to adifferent person.T...

Page 5 - TECHNICAL INFORMATION

• Do not install and connect a damaged appliance. • Make sure to remove all packaging and transport bolts. • Make sure that the mains plug is dis- connected from the mains socket dur-ing installation. • Only a qualified person must do the electrical installation, the plumbing andthe installation of ...

Page 7 - Spanner

PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water inlet valve 10 Mains cable 11 Transit bolts 12 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner...

Page 8 - CONTROL PANEL; Opó; ON OFF BUTTON; • The maximum temperature of the programme.

CONTROL PANEL 1 2 3 4 5 6 7 8 9 10 Syntetyczne Latwe Prasowanie Delikatne Koc Welniane/ Jedwabne Ekonomiczne Super Eko 20 Min. - 3 kg Jeans Plukanie Wirowanie/ Odpompowanie Odswiezanie Ochrona 1 On/Off button ( On/Off ) 2 Programme knob 3 Display 4 Start Pause button ( Start/Pauza ) 5 Delay start bu...

Page 9 - If the programme is completed but the symbol stays on:; DELAY START BUTTON

C • The display symbols. 2) Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on.You can open the door only when the symbol goes off. If the programme is completed but the symbol stays on: • There is water in the drum.• The 'Ri...

Page 11 - PROGRAMMES; SPIN REDUCTION

PROGRAMMES ProgrammeTemperature Type of loadmax. weight of load Cycledescription Functions Bawełniane 95° - Cold White and colouredcotton with normalsoil.max. 8 kg WashRinsesLong spin SPIN REDUCTIONRINSE HOLDSTAINEXTRA RINSETIME SAVE 1) Bawełniane +Pranie Wst ę pne 95° - Cold White and colouredcotto...

Page 12 - Cotton and synthetic items.

ProgrammeTemperature Type of loadmax. weight of load Cycledescription Functions Płukanie Hand washed items. RinsesLong spin SPIN REDUCTIONRINSE HOLDEXTRA RINSE Jeans 60° - Cold All items in jeans.Jersey made itemswith hi-tech materi-als.max. 8 kg WashRinsesShort spin SPIN REDUCTIONRINSE HOLDEXTRA RI...

Page 13 - • Clothes with inclusion of plastic, metal, wooden parts or alike.; CONSUMPTION VALUES; Programme; White Cottons 95 °C

Programme 1) Type of load Max. load Steam can be used for dried, washed or worn once laundry. These pro-grammes can reduce creases and odours and make your laundry moresmooth.Do not use any detergent. If necessary, remove stains by washing or usinglocalized stain removal.Steam programmes do not perf...

Page 14 - Press button; LOADING THE LAUNDRY; Open the appliance door.; FILLING THE DETERGENT AND ADDITIVES

BEFORE FIRST USE 1. To activate the drain system, put 2 li-tre of water in the main wash com-partment of the detergent dispenser. 2. Put a small quantity of detergent inthe main wash compartment of the detergent dispenser. Set and start aprogramme for cotton at the highesttemperature without laundry...

Page 15 - This is the maximum level for the quantity of liquid additives.; Check the position of the flap

The detergent compartment for the prewash phase and the soakprogramme.Add the detergent for prewash and soak before the start of theprogramme. The detergent compartment for the washing phase.If you use a liquid detergent, put it immediately before you startthe programme. Liquid additives compartment...

Page 16 - SETTING AND STARTING A PROGRAMME; INTERRUPT A PROGRAMME

4. To use liquid detergent, turn the flapdown. With the flap in the positionDOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed inthe flap. – Do not set the prewash phase.– Do not set the delay start func- tion. 5. Measure out the dete...

Page 17 - Steam; CANCEL THE DELAY START; To open the appliance door:; AT THE END OF THE PROGRAMME

Before you press button 4 to start the appliance, you can cancelor change the set of the delaystart.You cannot set the delay start withthe Steam programme. CANCEL THE DELAY START 1. Press button 4 . The related indica- tor flashes. 2. Press button 5 again and again until the display shows 0’ . 3. Pr...

Page 18 - HINTS AND TIPS; THE LAUNDRY LOAD; soft

HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We recommend that...

Page 19 - medium

Level Type Water hardness °dH °T.H. mmol/l Clarke 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 ENGLISH 19

Page 20 - CARE AND CLEANING; DESCALING; gent with biological properties.; DRUM; • Start a short programme for cotton at; DOOR SEAL

CARE AND CLEANING WARNING! Disconnect the appliance from the mainssupply before you clean it. DESCALING The water we use contains limescale. If itbecomes necessary, use a water softenerto remove limescales.Use a special product made for washingmachines. Obey the instructions that youfind on the pack...

Page 21 - DETERGENT DISPENSER; To clean the dispenser:; Pull the dispenser out.; DRAIN PUMP; • The display shows an alarm code be-

DETERGENT DISPENSER To clean the dispenser: 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquid ad-ditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the recess. DRAIN PUMP Regularly exami...

Page 22 - To clean the drain pump:; Open the drain pump door.

To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess ofthe drain pump to collect the waterthat flows out. 4. Press the two levers and pull forwardthe drainage duct to let the waterflow out. 1 2 5. When the container is full of w...

Page 23 - To clean the water inlet filters:; EMERGENCY DRAIN

1 2 9. Clean the filter under the water tapand put it back in the pump into thespecial guides. 10. Make sure that you tighten correctlythe filter to prevent leakages. 11. Put the flap back and close the drainpump door. THE INLET HOSE FILTER ANDTHE VALVE FILTER It could be necessary to clean the filt...

Page 24 - FROST PRECAUTIONS; Remove the water inlet hose

1. Put 2 litres of water in the main washcompartment of the detergent dis-penser. 2. Start the programme to drain the wa-ter. FROST PRECAUTIONS If the appliance is installed in an areawhere the temperature can be less than 0°C, remove the remaining water from theinlet hose and the drain pump. 1. Dis...

Page 25 - TROUBLESHOOTING; - The appliance does not fill with; Problem; The water tap is closed.

TROUBLESHOOTING The start of the appliance does not occuror it stops during operation.First try to find a solution to the problem(refer to the table). If not, contact the serv-ice centre. With some problems, the acousticsignals operate and the display showsan alarm code: • - The appliance does not f...

Page 27 - Too much laundry load.

Problem Possible cause Possible solution The appliance fillswith water anddrain immediately. The end of the drainhose is too low. Make sure that the drain hose isin the correct position. The washing re-sults are not satis-factory. The detergent you usedwas not sufficient or cor-rect. Increase the de...

Page 28 - INSTALLATION; UNPACKING; Remove the cardboard top.

INSTALLATION UNPACKING 1. Use the gloves. Remove the externalfilm. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packagingmaterials. 4. Remove the internal film. 5. Open the door. Remove the polystyr-ene piece from the door seal and allthe items from the drum. 28...

Page 29 - Pull out the plastic spacers.

6. Put one of the polystyrene packagingelements on the floor behind the ap-pliance. Carefully put down the appli-ance with the rear side on it. Makesure not to damage the hoses. 1 2 7. Remove the polystyrene protectionfrom the bottom. 8. Pull up the appliance in vertical posi-tion. 9. Remove the pow...

Page 30 - POSITIONING AND LEVELLING; air circulation below the appliance.

12. Put the plastic caps in the holes. Youcan find these caps in the user man-ual bag. WARNING! Remove all the packaging and thetransit bolts before you install theappliance. We recommend that you keep thepackaging and the transit bolts forwhen you move the appliance. POSITIONING AND LEVELLING x4 • ...

Page 31 - THE INLET HOSE; • Connect the hose to the appliance.; WATER DRAINAGE

THE INLET HOSE 20 O 20 O 20 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaksfrom the cou...

Page 32 - • Directly to a built-in drain pipe in the

With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide cannot move when the appliance drains. At-tach the guide to the water tap or thewall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into adrain pipe at a height of not less than60 cm and n...