AEG FSS52610Z- Manuals

Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION; Before the installation and use of the appliance,

CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • Do not use high pressure water sprays and/or steam to clean the appliance. • If the applian...

Page 5 - PRODUCT DESCRIPTION

WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are da...

Page 6 - CONTROL PANEL; Indicators

5 Salt container 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 3.1 Beam-on-Floor The Beam-on-Floor is a light that is displayed on the floor below the appliance door.• When the programme starts, a red light comes on and stays on for the durat...

Page 7 - PROGRAMMES; Consumption values

5. PROGRAMMES Programme Degree of soilType of load Programme phases Options P1 1) • Normal soil• Crockery and cutlery • Prewash• Wash 50 °C• Rinses• Dry • TimeSaver• XtraDry P2 2) • All• Crockery, cut- lery, pots andpans • Prewash• Wash from 45 °C to 70 °C • Rinses• Dry • XtraDry P3 • Heavy soil• Cr...

Page 8 - SETTINGS

Programme 1) Water (l) Energy (kWh) Duration (min) P5 13 - 14 0.9 - 1.1 70 - 85 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes For all the necessary information fo...

Page 11 - OPTIONS; XtraDry; BEFORE FIRST USE

7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deact...

Page 12 - DAILY USE

8.1 The salt container CAUTION! Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. How to fill the salt container 1. Turn the cap of the salt container ...

Page 14 - HINTS AND TIPS

the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function. Do not t...

Page 16 - CARE AND CLEANING; Cleaning the filters

11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made...

Page 17 - TROUBLESHOOTING

CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.3 External cleaning • Clean th...

Page 19 - The washing and drying results are not satisfactory

Problem and alarm code Possible cause and solution The appliance trips the cir-cuit-beaker. • The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage andthe capacity of the meter or turn off one of the applian-ces in use. • Internal electrical fault...

Page 21 - TECHNICAL INFORMATION; ENVIRONMENTAL CONCERNS

Refer to "Before first use" , "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818-898 / 550 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar...