AEG FSK63700P- Manuals

4. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay button 4 Program button 5 ExtraHygiene button 6 TimeSaver button 7 XtraDry button 8 RESET button 9 Indicators 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. Rinse aid indicato...

Programme Degree of soilType of load Programme phases Options P5 4) • Normal or light soil • Delicate crock- ery and glass-ware • Wash 45 °C• Rinses• Dry • XtraDry P4 5) • Fresh soil• Crockery and cutlery • Wash 60 °C• Rinses • ExtraHygiene• XtraDry P6 6) • Normal soil• Crockery and cutlery • Prewas...

Programme 1) Water (l) Energy (kWh) Duration (min) P6 12 - 13 1.1 - 1.3 230 - 250 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes To receive the necessary informati...

CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. How to deactivate AirDry Make sure the appliance is in user mode. 1. Press . • The indicators , , and are off. • The indicator still flashes. • The display shows the current s...

7.3 ExtraHygiene This option provides better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase. How to activate ExtraHygiene Press . The related indicator is on. The display shows the updated programme duration. 8. BEFORE FIRST USE 1. Make sure...

8.2 How to fill the rinse aid dispenser A B C CAUTION! Only use rinse aid designed specifically for dishwashers. 1. Open the lid ( C ). 2. Fill the dispenser ( B ) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam forma...

approximately 3 seconds and then shows the programme duration. 4. Set the applicable options. 5. Close the appliance door to start the programme. Starting a programme with delay start 1. Set a programme. 2. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). The ind...

10.6 Unloading the baskets 1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then from the upper basket. After the programme is completed, water can still remain on the inside surfaces of the applianc...

11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • To maintain the performance of your appliance, use a cleaning product designed specifically for dishwashers at least once a month. Carefully follow the instructions on the packa...

12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use" , "Hints and tips" and the basket loading leaflet. • Use more intensive washing programmes.• Clean spray arm jets and the filter. Refer to "Ca...

Problem Possible cause and solution There are residues of deter-gent in the dispenser at theend of the programme. • The detergent tablet got stuck in the dispenser and was not completely washed away by water. • Water cannot wash away the detergent from the dis- penser. Make sure that the spray arm i...

Power consumption Left-on mode (W) 5.0 Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 14. ENVIRONMENTAL CONCERNS Recycle materials with the symb...