AEG FSK63600P- Manuals

4. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay button 4 Program button 5 ExtraHygiene button 6 TimeSaver button 7 XtraDry button 8 Reset button 9 Indicators 4.1 Indicators Indicator Description End indicator. Rinse aid indicator. It is always off while the programme operates. S...

Programme Degree of soilType of load Programme phases Options P5 • Normal or light soil • Delicate crock- ery and glass-ware • Wash 45 °C• Rinses• Dry • XtraDry P4 3) • Fresh soil• Crockery and cutlery • Wash 60 °C or 65 °C• Rinses • ExtraHygiene• XtraDry P6 4) • Normal soil• Crockery and cutlery • ...

5.2 Information for test institutes For all the necessary information for test performance, send an email to: [email protected] Write down the product number (PNC) that is on the rating plate. 6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme...

3. Press on/off to confirm the setting. 7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you select non compatible options, the a...

8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start a programme to remove any processin...

3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the lid locks into position. Fill the rinse aid dispenser when the indicator ( A ) becomes clear. If you use multi-tablets and the drying performance is satisfactory, the rinse aid refi...

Starting a programme with delay start 1. Set a programme. 2. Press Delay repeatedly until the display shows the desired delay time (from 1 to 24 hours). The indicator is on. 3. Close the appliance door to start the countdown. While a countdown is running it is possible to increase the delay time but...

11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made...

• Using short-duration programmes regularly can cause grease and limescale buildup inside the appliance. Run long-duration programmes at least twice a month to prevent the buildup. 12. TROUBLESHOOTING If the appliance does not start or it stops during operation, first check if you can solve the prob...

Problem and alarm code Possible cause and solution The appliance stops andstarts more times during op-eration. • It is normal. It provides optimal cleaning results and en- ergy savings. The program lasts too long. • Select the TimeSaver option to shorten the program time. • If the delayed start opti...

Problem Possible cause and solution Limescale deposits on the ta-bleware, on the tub and onthe inside of the door. • The level of salt is low, check the refill indicator.• The cap of the salt container is loose.• Your tap water is hard. Refer to "The water softener" . • Even using multi-func...