Page 2 - spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.; SAFETY INFORMATION; Before the installation and use of the appliance,
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • Do not use high pressure water sprays and/or steam to clean the appliance. • If the applian...
Page 6 - PRODUCT DESCRIPTION
3. PRODUCT DESCRIPTION 4 3 7 9 8 10 5 6 11 1 2 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 3.1 Beam-on-Floor The Beam-on-Floor is a light that is displayed on the...
Page 7 - CONTROL PANEL; Indicators; PROGRAMMES
4. CONTROL PANEL 1 2 9 3 4 5 6 7 8 1 On/off button 2 Display 3 Delay button 4 Programme button (up) 5 Programme button (down) 6 TimeSaver button 7 XtraDry button 8 RESET button 9 Indicators 4.1 Indicators Indicator Description Rinse aid indicator. It is always off while the programme operates. Salt ...
Page 8 - Consumption values; Information for test; SETTINGS; Programme selection
Programme Degree of soilType of load Programme phases Options P5 • Normal or light soil • Delicate crock- ery and glass-ware • Wash 45 °C• Rinses• Dry • XtraDry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is ...
Page 9 - How to set the water softener
• Activation or deactivation of the rinse aid empty notification. • Activation or deactivation of AirDry. As the appliance stores the saved settings, there is no need to configure it before every cycle. How to set the programme selection mode The appliance is in programme selection mode when the dis...
Page 11 - How to deactivate AirDry; OPTIONS; XtraDry
During the drying phase, the door opens automatically and remains ajar. CAUTION! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. AirDry is automatically activated with allprogrammes excluding . To improve the drying performance...
Page 12 - BEFORE FIRST USE; The salt container
How to activate XtraDry Press . The related indicator comes on. 7.2 TimeSaver This option increases the pressure and the temperature of the water. The washing and the drying phases are shorter.The total programme duration decreases by approximately 50%. The washing results are the same as with the n...
Page 13 - DAILY USE; Using the detergent
8.2 How to fill the rinse aid dispenser A B D C M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button ( D ) to open the lid ( C ). 2. Pour the rinse aid in the dispenser ( A ) until the liquid reaches the fill level 'max'. 3. Remove ...
Page 15 - HINTS AND TIPS
Cancelling the programme Press and hold RESET until the appliance is in programme selection mode. Make sure that there is detergent in the detergent dispenser before you start a new programme. End of the programme When the programme is completed the display shows 0:00 . 1. Press the on/off button or...
Page 16 - CARE AND CLEANING; Cleaning the filters
10.4 Loading the baskets • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the item...
Page 18 - TROUBLESHOOTING
• If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. • To maintain the performance of your appliance at its best, we recommend to use monthly ...
Page 20 - The washing and drying results are not satisfactory
12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use" , "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes.• Clean spray arm jets and filter. Refer to "Care and C...
Page 21 - TECHNICAL INFORMATION
Problem Possible cause and solution There are residues of deter-gent in the dispenser at theend of the programme. • The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water. • Water cannot wash away the detergent from the dis- penser. Make sure that the s...
Page 22 - ENVIRONMENTAL CONCERNS
Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. 14. ENVIRONMENTAL CONCERNS Recycle the materials with the symb...